What are the dimensions of the GLC?

What does traffic violation code 10392 mean?

Violation code 10392 means: Motor vehicle parked temporarily in violation of regulations. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: 0 demerit points; fine amount: 200 yuan; other penalties: none. Traffic violation codes consist of four to five digits, classified according to the principles in the traffic law. The order from left to right is: the first digit represents the behavior classification code, the second digit represents the demerit point classification code, the third and fourth digits are sequential numbers, and the fifth digit indicates the specific item number. First digit: Behavior classification code, indicating the category in the Road Traffic Law; Second digit: Demerit point classification code, indicating the category of demerit points for the traffic violation; Third, fourth, and fifth digits: Sequential code, indicating the order of the violation within the same behavior category. For example: 13035—"1" indicates a motor vehicle behavior, the second digit "3" means 3 demerit points, and "035" indicates the fifth item under the third category of 3-point violations. Explanation of behavior classification codes: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003. Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002. Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030. Codes starting with 4 indicate highway traffic, e.g., 4002. Codes starting with 5 indicate other regulations, e.g., 5005. Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008. Codes starting with 8 indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common ways to check motor vehicle violations: Visit the office halls of traffic departments in various districts and counties to query via touch terminals; Log in to the external service websites of the public security traffic management bureaus of various cities, find the vehicle violation query section, enter the license plate number and engine number, and click to query; Call (area code + 114) to inquire; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For motor vehicles parked temporarily in violation of regulations, you can handle the violation through the Traffic Management 12123 app. After logging in, enter the violation handling process, complete the handling, and make the payment.

8

2

Share

Does signing after the driving test mean passing?

In some regions, candidates are required to sign only after passing the driving test (Subject 3), while in others, candidates must sign the score sheet regardless of the result. Generally, test results can be checked within a few hours after the exam, but most people have to wait until the next day to see their results. The following are some precautions for the Subject 3 driving test: 1. Note 1: Follow the instructions during the test. The Subject 3 test includes up to 16 assessment items from the preparation to the end of the test. Candidates should follow the voice prompts to perform the operations. Note that roadside signs are only for reference, and actions should be taken only after the voice announcement. 2. Note 2: Stay relaxed and look ahead; don't be too nervous. 3. Note 3: Pay attention to the road markings and reference points. 4. Note 4: Ensure the gear matches the speed.

6

3

Share

What is the standard tire pressure for a 125cc scooter?

This type of motorcycle is recommended to have a front tire pressure of around 170kpa and a rear tire pressure of around 220kpa. Here are some maintenance tips for 125cc scooters: 1. Engine: The engine is put to the test during long-distance rides, as its temperature rises relatively quickly during operation. High temperatures can easily lead to decreased performance and excessive wear. To address this, it's advisable to use high-quality lubricating oil, and in some cases, synthetic lubricating oil may be necessary. 2. Related systems: The filtration performance and air intake of the intake system can affect the engine's combustion state; the braking system directly impacts driving safety; the walking system directly affects riding comfort. Therefore, it's important to perform relevant checks and maintenance on the intake system, braking system, and walking system.

7

3

Share

What are the length, width, and height of the Toyota Vios?

The length, width, and height dimensions of the Toyota Vios are 4435mm/1700mm/1490mm, which are official data. The length of the Toyota Vios refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Toyota Vios has a maximum power of 82kW and a maximum torque of 139 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4200 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed continuously variable transmission (CVT) and a 5-speed manual transmission. National regulations have specific requirements regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

9

1

Share

What are the reasons for high fuel consumption in the Fit?

The reasons for increased fuel consumption in the Fit include insufficient tire pressure, tire wear, severe carbon buildup, and improper driving habits. Below are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When the car starts at low speed, it is in the peak fuel consumption zone. Therefore, lightly pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Regularly change the engine oil and remove carbon buildup. 4. Avoid emergency braking: Anticipate road conditions in advance to avoid emergency braking, which not only improves driving safety but also saves fuel. For example, gradually decelerate before traffic lights and use inertia to glide.

15

5

Share

Can I drive to the repair shop with a flat tire?

If there is no air leakage or the leakage is slow, you can drive at low speed to the nearest repair shop for inspection. However, if the leakage is severe, do not continue driving. Instead, replace it with a spare tire or call for assistance. Continuing to drive with severe air leakage can cause excessive damage to the tire and even deformation of the wheel rim. Solutions for tire air leakage are as follows: 1. Solution one: Continuing to drive with a leaking tire is very dangerous as it may lead to a blowout at any time. If there are no tire repair tools or an air pump in the car, immediately go to a nearby auto repair shop for handling. 2. Solution two: To ensure driving safety, you can also choose high-quality tire repair fluid that does not damage the tire and keep it in the car for emergency use. Additionally, consider opting for new tire repair methods, such as an integrated tire repair and inflation machine. 3. Solution three: Tire repair tools are convenient and efficient, allowing for simultaneous inflation and repair, easily solving tire problems. Anyone can handle them effortlessly. For example, the fifth-wheel tire repair kit from Fengjinba is such a combination, safe and effective, completing tire repair and inflation in just five minutes.

3

2

Share

What are the dimensions of the GLC?

What does traffic violation code 10392 mean?

Does signing after the driving test mean passing?

What is the standard tire pressure for a 125cc scooter?

What are the length, width, and height of the Toyota Vios?

What are the reasons for high fuel consumption in the Fit?

Can I drive to the repair shop with a flat tire?

Should You Use Cold or Hot Air to Dehumidify the Car Interior?

Can I roll down the windows after leaving the car film in the sun for a day?

Where is the cabin air filter located in a Ford Transit diesel van?

Why are used Polos so expensive?