What are the dimensions of the GAC Toyota Levin?

2 Answers
MacLeo
08/31/25 7:17am
GAC Toyota Levin has dimensions of 4695mm in length, 1780mm in width, and 1455mm in height. Below is the relevant introduction of GAC Toyota Levin: 1. The wheelbase of GAC Toyota Levin is 2750mm. 2. The emblem of GAC Toyota Levin adopts design elements similar to the GR Supra, positioned on the engine hood, presenting a low and dynamic posture. The upper grille is slender and curves upwards on both sides, with sharp-looking eagle-eye LED headlights. The wide lower grille is covered with piano black trim, giving the whole vehicle a grand and dynamic appearance. 3. GAC Toyota Levin is equipped with a 9-inch floating central control screen and a 12.3-inch full LCD instrument panel, which displays rich information. Additionally, the new car also features the Toyota Safety Sense 2.0 system.
Was this review help?
19
5
Share
Arlene
09/13/25 3:37am
I've been driving the GAC Toyota Levin, and its dimensions are very practical. It's about 4.7 meters in length, 1.8 meters in width, and 1.4 meters in height, with a wheelbase of 2.75 meters. It's especially convenient for city driving—turning isn't too cumbersome, and parking in tight spaces is no problem. My family says the rear seating is comfortable, with enough legroom for three people, and the trunk can fit two large suitcases. Compared to other compact cars, the Levin's dimensions are just right—not too big but quite spacious, making it fuel-efficient and easy to handle for daily commutes. I've also noticed how the dimensions relate to aerodynamics; the body design helps reduce fuel consumption and keeps the car stable at high speeds. Overall, the dimensions strike a good balance between practicality and comfort.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What is the difference between left turn yield and left turn hand signals?

Left turn hand signal is to extend the right hand forward with the right palm vertical, and move the left hand from the outside of the left leg towards the front at about 45°. The left turn yield hand signal only involves the left hand movement, where the left hand is raised on the left side of the body and then brought back towards the body. Below is relevant information about left and right turns: 1. Left turn signal: The hand signal indicates permission for the vehicle to make a left turn, and a U-turn can be made without obstructing the passage of released vehicles. 2. Left turn yield signal: The hand signal indicates permission for vehicles on the left side of the traffic police to enter the intersection, approach the center of the intersection along the left turn direction, and wait for the left turn signal. Note: The biggest advantage of setting up a left turn yield area is to increase the capacity of left turn lanes at intersections, reduce drivers' waiting time when passing through intersections, and improve intersection throughput.
4
1
Share

What is the Function of Dynamic Stability Control?

Dynamic Stability Control (DSC) functions to ensure that the vehicle maintains optimal traction during turns, thereby guaranteeing driving stability. The DSC system is an advanced extension of acceleration slip regulation or traction control systems. To maintain good traction when cornering, the DSC system is equipped with more sophisticated detection and control components. In addition to monitoring wheel speed, it also detects steering wheel rotation angle, vehicle speed, and lateral acceleration. Based on the collected data, the system determines whether there is a risk of wheel slip during the turning process.
16
4
Share

What to Do If You Miss the First Maintenance?

If you miss the first maintenance time and have not performed the first maintenance, it is recommended that the car owner immediately go to the 4S shop for the first maintenance. The first maintenance time for a new car is between 3 to 5 months, and the first maintenance mileage is between 3000 kilometers to 5000 kilometers. Usually, it is based on the mileage and the specified first maintenance time, whichever comes first. The first maintenance of a car is very simple, generally only requiring the replacement of engine oil and oil filter. Engine oil is very important for the engine. Engine oil is called the blood of the engine. It plays a role in lubrication, heat dissipation, cleaning, and sealing in the engine. The engine oil in a new car is the initial oil, which is suitable for the engine break-in period. After reaching the first maintenance time, the car owner should go for the first maintenance on time to replace the initial oil.
13
0
Share

What does the P indicator on the car dashboard mean?

When the P indicator appears on the car dashboard, it means the parking brake is engaged. The parking brake, commonly referred to as the handbrake, is a manually operated brake installed in motor vehicles. It is used to stabilize the vehicle after it has come to a complete stop, preventing accidents caused by rolling on inclined surfaces. Some automatic transmission models on the market feature a foot brake located near the driver's left foot, which serves the same function as the handbrake. Additionally, certain advanced models are equipped with an electronic parking brake system. The car dashboard is a device that reflects the working conditions of various vehicle systems, commonly displaying indicators such as the fuel light, washer fluid light, electronic throttle light, front and rear fog lights, and warning lights.
7
0
Share

How to judge the distance between the car front and the wall?

The method to judge the distance between the car front and the wall is: When the front is a wall and the car is facing forward preparing to park, maintain a normal driving posture. Look at the wall base through the lower edge of the left rearview mirror. When the wall base just aligns with the lower edge of the left rearview mirror, stop the car. At this time, the distance between the car front and the wall is exactly 50 cm. If parking in reverse close to the wall without the help of a reversing camera, you need to rely on your own experience. Adjust the seat position to suit yourself. You can observe the position of the left rearview mirror. When you can see the rear wall base at the very bottom edge, you can stop the car at this position. At this time, the distance from the rear wall is also about 50 cm.
20
5
Share

Is there a fee for retaking Subject 4?

There is no fee for retaking Subject 4. Subject 4, also known as the theoretical test for drivers, is part of the assessment for obtaining a motor vehicle driver's license. Subject 3 test consists of two parts: the road test and an additional test on safety and civilized driving knowledge, commonly referred to as Subject 4, which evaluates driving ethics. Since this test is conducted after Subject 3, it is commonly called Subject 4. The test content includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.