What are the dimensions of the Ford Focus body?

2 Answers
Olga
09/01/25 2:12am
The body dimensions of the Ford Focus are 4647*1810*1468mm. More information about the Ford Focus is as follows: 1. The new Focus adopts a brand-new family design, with sharp LED headlights and eye-catching L-shaped daytime running lights. 2. The car is equipped with dual-tone 18-inch wheels, a sporty bumper, and a rear spoiler, exuding vitality and a strong sense of sportiness that appeals to young people. 3. The dashboard of the new Focus has a more three-dimensional design, featuring a striking floating 8-inch central control screen and the SYNC3 multimedia system, which supports CarPlay and CarLife functions.
Was this review help?
8
2
Share
Jessica
09/13/25 5:09am
As an automotive enthusiast, I frequently measure various car models. The approximate body dimensions of the Ford Focus are: length 4400mm, width 1800mm, height 1450mm, and wheelbase 2650mm. These measurements are based on the standard configuration of the common hatchback version, with specific values potentially varying slightly by year and model, such as the sedan version being slightly longer at around 4500mm. Body dimensions directly affect handling and stability; a sufficient width ensures better stability when cornering, while a moderate height maintains a low center of gravity, preventing the car from feeling floaty. When selecting a car, remember to check the specific model's manual for accurate parameters to avoid being misled by modified versions. The size design also considers aerodynamic drag and fuel efficiency, making the Focus a well-balanced model in the compact car segment.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

How to Turn On the Heater in a Buick Regal?

The heater switch in the Regal is typically marked with red and blue colors on both sides. Rotate the knob to adjust the temperature, with the red area indicating gradually increasing warmth. Below are the correct steps to turn it on: 1. Start the engine and allow it to warm up until the temperature gauge needle reaches the middle position. 2. Turn on the heater and set the air circulation to external circulation to expel cold air from the cabin. After 2 to 3 minutes, switch the air circulation to internal circulation. Additional information: 1. Directing warm air at the head for extended periods can cause driver fatigue and compromise driving safety. Therefore, it is recommended to slightly open a window for air circulation when using the heater for long durations to maintain oxygen levels in the cabin and keep the driver alert. 2. The car's heating system utilizes residual heat from the engine's radiator and exhaust pipe to warm the air before delivering it to the cabin. When the engine is first started, the radiator's water temperature is too low to provide excess heat for warming the air. Turning on the heater at this stage can interfere with the engine's normal warming process. To maintain proper engine operation, the fuel injection system increases fuel delivery, leading to higher fuel consumption.
2
2
Share

What Type of Engine Oil is Suitable for Winter in Northern Regions?

For winter in northern regions, it is generally recommended to use 0W-30 engine oil. Here is an introduction to engine oil: Meaning of the Specifications: The engine oil specification 0W-30 indicates that 'W' stands for WINTER, meaning it is suitable for winter use. The '0' before the W represents the viscosity at low temperatures. The smaller the number, the better the fluidity at low temperatures and the stronger the cold resistance. The '30' refers to the viscosity at 100 degrees Celsius. The larger the number, the higher the viscosity and the stronger the high-temperature resistance. Method for Choosing Engine Oil Specifications: Selection should be based on needs, while also considering factors such as the vehicle's driving environment and the owner's driving habits. If the vehicle frequently drives in congested areas or is relatively old, using engine oil with higher viscosity can be considered to better protect the engine.
14
3
Share

Is it necessary to install a 360-degree surround view system?

It is not necessary to install a 360-degree surround view system. Here are the details about the 360-degree surround view system: Installation method of the 360-degree surround view system: First, drill a hole in the car, remove the entire door panel, install the front camera on a suitable grille or emblem at the front of the car, and mount the side cameras at the bottom of the left and right side mirrors. Then, connect the wiring. Although the 360-degree surround view system can be installed, the process is quite complex and the cost is not low. Impact of installing a 360-degree surround view system on the car: The installation process is generally invasive, requiring the removal of original car parts and connection to the car's original wiring. If the wiring is not properly installed, minor issues like electrical leakage may occur, while more severe cases could lead to safety hazards such as fire.
1
4
Share

Can petroleum and petrochemical gasoline be mixed?

Petroleum and petrochemical gasoline can be mixed. Here are some related introductions about gasoline: Introduction to 95-octane gasoline: 95-octane gasoline consists of 95% isooctane and 5% n-heptane. High-compression engines should use high-octane gasoline. If low-octane gasoline is used in a high-compression engine, it may cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Introduction to refueling precautions: High-compression engines can use low-octane gasoline, but you should not blindly choose the gasoline grade based on the compression ratio. Instead, follow the manufacturer's recommendations for the appropriate gasoline.
9
1
Share

What Causes the Buick Encore's Brake Not to Return to Position?

Brake not returning to position could be caused by faults in the brake bracket, master cylinder, or wheel cylinder. These components cannot be repaired once faulty and require replacement with a new brake assembly. It might also be due to a leaking booster pump, so check for any oil leaks in the vehicle. Here are some relevant details: 1. If the wheel cylinder does not return to position, simply put, after pressing the brake pedal, if the pedal neither rises nor offers resistance, and even without pressing the brake pedal, you still feel significant wheel resistance, or in severe cases, wheel lock-up occurs. In such cases, we need to inspect whether the air brake master cylinder or wheel cylinder components are damaged or if there is internal rust in the wheel cylinder. 2. If the damage is direct, repair is not possible, and the only solution is to replace it with a new one. However, note that replacing the wheel cylinder requires bleeding the brake system, which will inevitably result in the loss of brake fluid from that section. Therefore, it's advisable to replace the brake fluid as well. 3. If internal rust is the issue, disassemble the wheel cylinder and use fine sandpaper to polish the rusted areas. Applying engine oil can also help prevent rust from recurring.
11
0
Share

What is the Real Purpose of a Car Sunroof?

Car sunroof's real purpose is to effectively circulate air inside the vehicle and increase the intake of fresh air. The differences between cars with and without sunroofs are introduced as follows: Difference in light transmission: Cars with sunroofs have brighter interiors, visually enhancing the sense of space inside the vehicle and alleviating a sense of confinement; cars without sunroofs cannot relieve this feeling of confinement. Difference in safety: In cars with sunroofs, if the vehicle falls into water, occupants can escape through the sunroof before the roof is submerged; in cars without sunroofs, when the vehicle falls into water, significantly more force is required to open doors, etc.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.