What are the dimensions of the folded rear seats in the Baojun RM-5?

What Does Engine Seizure Mean?

Engine seizure occurs when the engine temperature becomes excessively high, causing the piston to expand and get stuck in the cylinder, resulting in engine failure. In severe cases, due to excessive pressure and the piston's inability to move, intense flames may erupt. The combustion process in an engine is highly complex, requiring precise design and control. Any slight control error or malfunction can lead to abnormal combustion, with engine seizure being one such form of abnormal combustion. The primary causes of engine seizure include inadequate engine cooling, causing the operating temperature to exceed the designed tolerance; poor quality or insufficient circulation of engine oil leading to inadequate lubrication; inaccurate adjustments in the engine's intake and exhaust systems or ignition timing; and lastly, excessively high engine workload, which can result in the phenomenon known as engine seizure or piston seizure.

3

5

Share

What does it mean when the SVS light is on in a diesel vehicle?

Diesel vehicle SVS light on is the engine fault light. When the SVS indicator light is on, it indicates that the engine control unit has detected an error signal from a certain sensor or that it has exceeded the usage standard. When the ignition switch is turned on, the vehicle's SVS indicator light will illuminate for an automatic check and then turn off automatically after a few seconds, which is a normal phenomenon. If it stays on, it indicates a fault in the vehicle's electronic control system. The reasons for the SVS light being on in a diesel vehicle include: 1. Poor engine combustion state; 2. Engine knocking; 3. Poor quality of vehicle fuel; 4. Dirty engine cylinder interior with deposited carbon deposits; 5. The electronic control unit cannot obtain engine data.

1

5

Share

What to Do When the Car Still Rolls After Applying the Handbrake?

The reason why the car still rolls after applying the handbrake may be due to slack in the handbrake. You can try tightening the handbrake cable. If it's a manual transmission, you can press the clutch with your left foot, press the brake with your right foot, engage any forward gear, apply the handbrake, and then turn off the engine to use the traction of the gear to prevent rolling. If it's an automatic transmission, press the brake, shift to P (Park), apply the handbrake, and then turn off the engine to utilize the locking mechanism of the automatic transmission's P gear to prevent further rolling. If you notice that the handbrake's braking efficiency or sensitivity is poor, you can adjust the handbrake's operating copper cable. At the connection point between the handbrake lever's base and the copper cable, there is an adjustable compensation mechanism. Loosen the locking nut with a wrench to stretch the length of the brake copper cable. However, some cars have the adjustment mechanism located underneath the vehicle. If adjustment is inconvenient, it should be handled by professional maintenance personnel.

12

0

Share

What does variable steering ratio mean?

Variable steering ratio adjusts the steering gear ratio based on the car's speed and steering angle. When the car is in a parked state, moving at low speeds, or making large steering angles, it provides a smaller steering gear ratio. When the car is driving at high speeds or making small steering angles, it provides a larger steering gear ratio to improve the stability of the car's steering. Currently, there are mainly two ways to achieve this function in variable ratio steering systems. One method relies on a special rack, which is simple in principle, relatively low in cost, and does not require high technical expertise. The other method is more complex, utilizing a planetary gear structure and an electronic system.

14

4

Share

Does a Leaking Shock Absorber Need to Be Replaced?

Shock absorber leakage requires replacement. Whether it's the front or rear shock absorber leaking, it must be replaced promptly. Otherwise, it will significantly affect the vehicle's ride comfort. In severe cases, it may also damage nearby components, impacting the normal operation of the vehicle. Two scenarios of shock absorber leakage: 1. Minor seepage: This appears as a small amount of oil stains on the shock absorber but does not affect the vehicle's comfort, functioning similarly to a normal shock absorber. Such seepage can be ignored, but it's important to monitor the leakage regularly. 2. Severe leakage: This is characterized by a large amount of oil sludge on the shock absorber. Severe leakage will degrade the vehicle's damping performance, significantly reducing ride comfort. On bumpy roads, it may also be accompanied by unusual noises. If the leakage is extremely severe, the shock absorber may fail, causing the vehicle to pull to one side. In such cases, the entire shock absorber must be replaced. Shock absorbers are designed to dampen the oscillations from the spring's rebound after absorbing shocks and to mitigate impacts from the road surface. They are widely used in automobiles to accelerate the attenuation of vibrations in the frame and body, thereby improving ride smoothness. When driving on uneven surfaces, although the suspension springs can filter out road vibrations, the springs themselves still undergo reciprocating motion. The shock absorber is used to suppress this spring oscillation.

7

2

Share

What is the difference between 91V and 91H tires?

The difference between 91V and 91H tires lies in their maximum speed ratings: 91V tires have a maximum speed of 240 kilometers per hour, while 91H tires have a maximum speed of 210 kilometers per hour. Tires are crucial safety components that significantly impact various aspects of a vehicle's performance, including both comfort and handling. Tires are round, elastic rubber products mounted on metal rims, designed to support the vehicle's weight, absorb external shocks, maintain contact with the road surface, and ensure driving performance. They operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during use. Therefore, tires must possess high load-bearing capacity, traction performance, and shock absorption capabilities.

12

0

Share

What are the dimensions of the folded rear seats in the Baojun RM-5?

What Does Engine Seizure Mean?

What does it mean when the SVS light is on in a diesel vehicle?

What to Do When the Car Still Rolls After Applying the Handbrake?

What does variable steering ratio mean?

Does a Leaking Shock Absorber Need to Be Replaced?

What is the difference between 91V and 91H tires?

What are the symptoms of a dirty fuel filter?

How Often Should Wheel Alignment Be Performed?

What Does Low Engine Coolant Level Mean?

What are the differences between the Golf R and GTI?