What are the dimensions of the FAW Besturn T99?

2 Answers
LeEvelyn
07/24/25 8:46pm
Besturn T99 has a body length of 4700mm, width of 1860mm, height of 1700mm, and a wheelbase of 2730mm. Relevant information is as follows: 1. The Besturn T99 is positioned as a 5-seater flagship SUV. The side proportions of the Besturn T99 are very well-balanced, with a wraparound waistline that divides the vehicle into two sections. Combined with the parallel design of the upper and lower window lines, it creates a visual impression of an extended length beyond its class. 2. The Besturn T99 is equipped with a powerful 2.0TD engine, with emissions below the China VI-B standard. The vehicle can accelerate from 0 to 100 km/h in just 8.6 seconds, with a combined fuel consumption of 7.9L per 100 kilometers.
Was this review help?
6
0
Share
DelGeorge
08/11/25 11:17am
I've just researched this car. The dimensions of the Bestune T99 are 4830mm in length, 1915mm in width, and 1685mm in height. Converted to meters, it's approximately 4.83m long, 1.92m wide, and 1.69m tall. I've driven it for a while, and the space is genuinely huge – perfect for family trips without feeling cramped. The trunk can easily fit three or four suitcases. However, beginners should be cautious; with urban parking spaces being small and the width exceeding 1.9m, it can be tricky to make U-turns in narrow alleys, so relying on the reverse radar is helpful. I recommend a test drive before purchasing to actually feel how the dimensions affect handling, not just looking at the numbers. Additionally, it's stable at high speeds, with the wide body not swaying in curves, and the height is just right – no scraping the chassis on bumps or uneven roads. Overall, these dimensions are well-balanced among SUVs in its class, suitable for family users who prioritize practicality, but those driving on narrow roads should be extra careful.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How many hours of practice are required for Subject 2?

Subject 2: A total of 26 class hours. This includes 2 hours of theory, 3 hours of simulated driving, and 21 hours of practical operation. According to the teaching syllabus, class hours are calculated cumulatively. Each student can sign in for a maximum of 4 hours of theoretical training per day. Any hours exceeding 4 will still be counted as 4, and any hours less than 4 will be calculated based on the actual time from sign-in to sign-out. Below are the exam precautions for Subject 2: 1. During the pre-driving preparation, you must adjust the seat and fasten the seat belt before verifying your fingerprint. 2. Each test item in the examination area is monitored by GPS positioning. The control line (yellow dotted line) for each item represents the test area for that item. Once the front of the vehicle passes the control line, it means you have entered the test for that item, and you must complete the test according to the rules of that item.
6
4
Share

What are the clothing color requirements for driver's license photos?

Requirements for driver's license photos: You cannot wear white clothes because the driver's license has a white background. Wearing white clothes will blend with the background, making it lack contrast and clarity. You also cannot wear uniforms; it's better to wear casual clothes for the photo. Of course, wearing colorful clothes or strange outfits is also not allowed. Relevant information is as follows: 1. Definition: The driver's license, also known as a "driving license," is a certificate required by law for individuals who drive motor vehicles. Driving a motor vehicle requires certain skills, and those who lack these skills may cause traffic accidents if they drive recklessly. Generally, people cannot drive on the road without a license. However, for those who have mastered safe driving skills, the document that permits them to drive on the road is the "driver's license." 2. Competency: The permission to drive a vehicle is granted through the issuance of a driver's license. A motor vehicle driver's license is a legal document issued by the authorities after an individual has learned and mastered traffic regulations and driving skills, and passed the required tests, permitting them to drive a specific type of motor vehicle.
3
4
Share

What Connects the Steering Gear and the Steering Knuckle Arm?

What connects the steering gear and the steering knuckle arm is the steering linkage rod. Below is an introduction to the steering knuckle arm: 1. Introduction: The steering knuckle arm, also known as the trapezoidal arm, is the final force-transmitting component in the steering linkage system. It is mounted on the left and right steering knuckles, with the other end connected to the tie rod via a ball joint. 2. Function: When the vehicle is turning, the driver applies a steering torque to the steering wheel. This torque is transmitted through the steering column, drive shaft, and steering gear, amplified by the steering gear, and then passed to the steering arm. From there, it is transmitted via the steering drag link to the steering knuckle and the steering knuckle arm on the steering knuckle, ultimately reaching the hub to turn the wheels. This illustrates the structural requirements of the steering knuckle arm, which serves to connect the drag link and the hub and enables steering functionality. 3. Precautions: On a solid front axle, the steering knuckle near the steering wheel side has two arms, connected to the longitudinal and transverse tie rods, respectively. The other side of the steering knuckle has only one arm connected via the transverse tie rod.
20
5
Share

What is the fuel tank capacity of the Trumpchi GS4 in liters?

The fuel tank capacity of the Trumpchi GS4 is 55 liters, as officially announced. Owners who have purchased the Trumpchi GS4 can also check this information on the vehicle's configuration sheet. The Trumpchi GS4 requires 92-octane gasoline, with a fuel consumption of 6.8L per 100 kilometers. A full tank of fuel allows for a driving range of approximately 809 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, and there is additional space between the safe fill level and the tank opening. This extra space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
18
2
Share

Will driving at 130 km/h on the highway result in a fine?

Possibly not. Driving at 130 km/h on the highway is considered a speeding violation when captured by cameras, but it may not result in penalty points or a fine. For example, driving at 130 km/h on a highway with a speed limit of 120 km/h constitutes an 8% overspeed, which is below the 10% threshold. According to relevant regulations, exceeding the speed limit by less than 10% does not incur penalty points or fines, but rather results in a warning. Below are the relevant details: 1. Penalty points for speeding on highways: The number of penalty points depends on the extent to which the vehicle's speed exceeds the limit. Any speed exceeding 10% of the limit will incur penalty points, with different ranges resulting in different point deductions. 2. Liability for accidents caused by speeding: If an accident is caused by speeding and the other party has no driving faults, the speeding driver will bear full liability. If both parties have committed violations, neither will be deemed fully liable. Liability will be determined based on the impact of each party's violations on the accident and the severity of their faults, assigning primary liability, equal liability, or secondary liability accordingly. The specific liability division is determined by the traffic police department. If dissatisfied with the division, one may apply for a review or directly file a lawsuit in court.
9
0
Share

What are the reasons for the car Bluetooth switch not responding?

The reasons for the car Bluetooth switch not responding are: the phone volume is not turned on, the pairing code is different, multimedia is not enabled, or there is signal interference. Phone volume not turned on: The volume on the car navigation system or phone is not turned on. Solution: Go to the phone settings, sound, find the media option, and turn up the media volume. The same applies to the car navigation system. Different pairing codes: The music playback programming of some phones does not match the pairing codes of certain car models, so only phone calls can be made but not music can be played. Solution: It is recommended to change the Bluetooth playback frequency band to resume normal use. Multimedia not enabled: The multimedia music function of the car Bluetooth is not enabled. Solution: Find the multimedia option on the screen, enter it, and select Bluetooth to play music. Signal interference: The media audio on the phone is not turned off, causing signal interference with the Bluetooth function. Solution: First, go to the phone's Bluetooth settings interface, where there are two options: phone audio and media audio. After connecting to the car Bluetooth, both options are turned on by default. You need to turn off the media audio and keep the phone audio on, ensuring that the three functions of Bluetooth calls, car music playback, and phone navigation voice prompts do not interfere with each other.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.