What are the dimensions of the BYD Song Plus trunk?

1 Answers
GemmaLee
07/29/25 11:08pm
The dimensions of the BYD Song Plus trunk are: Height: 780mm; Width: 1080mm, 1280mm; Length: 890mm, 1900mm. How to open the BYD Song trunk: 1. Press the unlock button on the handle inside the driver's door (the button with the unlock symbol) to open the trunk. The car must be parked and turned off for full vehicle unlocking, or when the vehicle is locked, press the trunk unlock button on the remote control for more than 3 seconds to open the trunk separately. 2. Importance of securing items in the car: If items placed in the car are not secured properly, they can move rapidly and hit various parts of the car during emergency braking or turning. More seriously, they may hit the windshield or directly cause harm to passengers. Therefore, it is necessary to place these items in the trunk and secure them properly.
Was this review help?
20
0
Share
More Forum Discussions

How to Operate the Alternation Between High Beam and Low Beam?

The operation method for alternating between high beam and low beam is: 1. Use your thumb and index finger to grasp the lever located at the lower left side of the steering wheel; 2. Pull it backward once; 3. Pull it in the opposite direction once to complete the alternation between high and low beams. Precautions for using car lights include: 1. Turn on the low beam when driving at night; 2. Do not use the high beam when a following vehicle is driving closely behind a leading vehicle in the same direction; 3. When passing through sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic signal control at night, you should alternate between high and low beams to signal. The function of the high beam is to check the road conditions in the distance, while the function of the low beam is to clearly see the road conditions in front of the vehicle.
9
1
Share

How to Remove the Driver's Airbag in an Audi S5?

The method for removing the driver's airbag in an Audi S5 is as follows: 1. Open the rear cover of the steering wheel; 2. Locate the internal fixing screws; 3. Use tools to remove the fixing screws; 4. Pull the airbag outward with force, disconnect the wiring harness plug, and the removal is complete. Taking the Audi S5 2020 Sportback as an example, its body dimensions are: length 4762 mm, width 1843 mm, height 1342 mm, with a wheelbase of 2831 mm. The Audi S5 2020 Sportback is equipped with a 3.0T turbocharged V6 engine, with a maximum power of 260 kW and a maximum power speed of 5400 to 6400 rpm, paired with an 8-speed automatic manual transmission.
17
5
Share

How to Remove the Maintenance Reminder on the Haval H6 Dashboard?

Haval H6 maintenance reminder elimination method: Turn off the key, press and hold the button at the lower right of the dashboard; turn the key to the position where all dashboard lights are on, and release the button after the small wrench icon on the dashboard stops flashing; press the button at the lower left of the dashboard, and the small wrench will disappear, thus eliminating the maintenance reminder. Relevant information about the Haval H6 is as follows: 1. The Haval H6's body dimensions are: length 4653mm, width 1886mm, height 1730mm, with a wheelbase of 2738mm. 2. The Haval H6 features a MacPherson strut front suspension and a multi-link independent rear suspension, equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, maximum power of 155kW, maximum torque of 325Nm, paired with a 7-speed dual-clutch transmission.
15
2
Share

What Does Blind Spot Monitoring Mean?

Blind spot monitoring refers to the installation of a camera on the right side mirror, which displays the image of vehicles located in the blind spot area on the screen. The functions of blind spot monitoring are: 1. Reduce the visual blind spots of the side mirrors; 2. Assist in expanding the field of vision; 3. When preparing to change lanes, it can confirm a wider rear view; 4. Provide more practical safety protection for everyone inside and outside the vehicle. The installation steps for blind spot monitoring are: 1. Connect the wiring and determine the installation position of the camera on the side mirror; 2. Wipe off the dust under the side mirror with a towel, peel off the adhesive tape of the camera, and stick it directly in place; 3. Guide the wire back into the car through the door gap, secure it along the edge with tubing and clips, and coil the wire neatly under the seat; 4. Plug in the cigarette lighter charger, connect the screen, and turn on the cigarette lighter switch.
7
2
Share

Why does 12123 show failure when the test is passed?

The reason why the test is passed but the traffic management 12123 shows failure is that the real-time data of the test results has not been uploaded to the system yet. It takes 1-2 days for the qualified results to be queried in the traffic management 12123. Introduction to Driver's License: The full name of the driver's license is the motor vehicle driver's license, also known as the driver's license. It is the license required by law for motor vehicle drivers to apply for. In China, the definition of a driver's license is: A motor vehicle driver's license is a legal document issued by the management department after the applicant has learned and mastered the knowledge of traffic regulations and driving skills, and passed the examination, permitting the applicant to drive a certain type of motor vehicle. Application Location: Those who apply for a motor vehicle driver's license should submit their application to the vehicle management office according to the following regulations.
17
3
Share

What Are the Consequences of Not Renewing a Driver's License for Over One Year?

It will be revoked. If a driver's license is expired, traffic police will impose a fine upon discovery, but no points will be deducted. There is a latest deadline for renewing a driver's license. If it has been expired for less than one year, it can be renewed through the normal process; if it has been expired for one to three years, the license will be revoked, but it can be regained by passing the subject one exam; if it has been expired for over three years, the license will be revoked. Article 57 of the 'Traffic Regulations and Point Deduction Rules': The driver of a motor vehicle shall apply for renewal of the motor vehicle driving license within 90 days before the expiration of the validity period of the motor vehicle driving license, at the vehicle management office where the motor vehicle driving license was issued or at other vehicle management offices. Remedial measures for a driver's license that has been expired for over one year: Stop driving on the road: Avoid being penalized for driving without a license. Prepare for Subject One: Before preparing, report to the vehicle management office, explain the situation to the staff, and then schedule the Subject One exam. Handle traffic violations: Complete this at the vehicle management office or traffic police station. Get a nearby medical examination: The main checks include color blindness identification, limb integrity, and corrected vision. You can choose the examination hall of the vehicle management office, a manual examination room, a community hospital (with examination qualifications), or a convenient examination service station. The results will be uploaded to the traffic management system. When applying, the application form shall be filled out, and the following certificates and documents shall be submitted: the identity certificate of the motor vehicle driver, the motor vehicle driving license, and the medical condition certificate issued by a medical institution at or above the county level or a military unit at or above the regiment level. For those applying for a special small automatic passenger car for the disabled, a medical condition certificate issued by a specialized medical institution designated by the provincial health authority shall be submitted. Materials required for renewing a driver's license: original ID card and its copy, qualified medical examination form from a hospital designated by the vehicle management office, three one-inch white-background color photos, completed driver's license renewal application form, and the fee. Photos and medical examination certificates required for renewal can be brought by yourself. If you are worried that they may not meet the requirements, you can directly handle them at the traffic police station's certification hall to avoid wasting time. Related matters for renewing an expired driver's license: About renewal: For annual review and renewal of an expired driver's license, the old license must be surrendered to the vehicle management office. Before renewal, all related traffic violations must be handled; otherwise, the application cannot be processed. The motor vehicle driving license can be renewed through the mobile app 'Traffic Management 12123,' the vehicle management office, traffic management departments, or public security authorities.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.