What are the dimensions of the Buick GL8 business vehicle?

3 Answers
DelValeria
07/23/25 8:29pm
The dimensions of the Buick GL8 business vehicle are: length 5238mm, width 1878mm, height 1776mm, with a wheelbase of 3088mm, a body weight of 1880kg, and a fuel tank capacity of 71 liters. Here are additional details: 1. The front suspension of the Buick GL8 business vehicle is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. 2. The Buick GL8 business vehicle features front-engine, front-wheel drive. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237 PS, a maximum torque of 350 Nm, and a maximum power of 174 kW, paired with a 9-speed automatic transmission.
Was this review help?
8
4
Share
LaMarley
08/10/25 4:01pm
The Buick GL8 measures approximately 5256 mm in length, 1878 mm in width, and 1776 mm in height. I've driven my friend's car a few times, and its length is close to 5.3 meters, making it a large-sized MPV. It feels particularly stable on the highway, but can be a bit challenging on narrow roads—it's best to look for large parking lots. The interior space is enormous, with the second-row seats adjustable for great comfort, making it ideal for business trips with clients or daily school runs where you need to carry a lot of stuff. This size design ensures ample legroom for passengers while maintaining good trunk capacity, offering high practicality—though you might need to check the rearview mirror a few more times when reversing. Overall, it's not just about being big; it's about efficiently utilizing every corner of space, which I find quite hassle-free.
Was this review help?
14
5
Share
Expand All
DiMaddox
09/23/25 3:30am
The GL8 measures 5256mm in length, 1878mm in width, and 1776mm in height. In the business vehicle segment, these dimensions are considered the golden ratio—slightly longer but comfortably seats seven inside. I frequently use it for long-distance business trips; the height prevents a cramped ceiling, and the width allows luggage storage on both sides. When parking in commercial centers, the automatic parking assist is essential to avoid scratches. Compared to sedans, it's nearly half a meter wider, providing stability during highway lane changes, though extra caution is needed in narrow alleys of older neighborhoods. The interior layout is clever—the foldable third row can accommodate plenty of cargo, making the size truly practical. It's a strong contender as a company commuter vehicle.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

How many questions are there in Subject 1, and what is the total score?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test for the driving license consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the paper and end the exam. Subject 1, also known as the Subject 1 theory test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes theoretical foundations of driving, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer, with a time limit of 45 minutes. Subject 1 test content: Driving license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: During the Subject 1 test, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, verify your identity at the assigned seat and begin the test. Ensure the camera is aligned with you and adhere to exam discipline. If you fail the first attempt, there is a retake opportunity on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it—unsigned reports are considered invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail it, the current test session ends, and the applicant must reschedule. In contrast, Subject 2 and Subject 3 allow only five attempts. Subject 2 and Subject 3 tests must be rescheduled at least ten days later. If you fail the Subject 3 safe and civilized driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge tests.
17
0
Share

How to Repair Engine Block Deformation Caused by Overheating?

If the engine block is deformed, it can only be replaced. The following introduces the repair method for engine block cracks: 1. Use coarse sandpaper to remove rust around the crack on the engine block. When sanding to a certain extent, the end of the crack can be located. 2. Then, directly perform welding with a patch plate. However, be cautious of warping at the welded area. If warping occurs, immediately hammer the welded area while it's still hot to prevent residual slag. 3. After patching, place an asbestos gasket between the patch plate and the engine block (or cylinder head), and apply a layer of lubricating oil on both sides.
13
2
Share

What does the check light mean?

check light is the engine fault light, which indicates that there is a problem with the engine when it illuminates. Here are some introductions about car fault lights: 1. There are many indicator lights on a car, such as the engine self-check indicator, oil pressure indicator, handbrake indicator, and coolant temperature indicator, each representing different meanings. Generally, when a red light comes on, you should be extra vigilant, contact professionals for solutions, and avoid continuing to drive. 2. If a problem occurs, promptly go to a 4S shop for vehicle inspection and repair to avoid risks and ensure personal safety on the road.
19
3
Share

Can You Die from Sleeping in a Car with the Windows Closed?

Sleeping in a car with the windows closed can indeed be fatal. Here are the reasons: 1. In a sealed vehicle, the oxygen supply is limited. As a person sleeps, they continuously consume oxygen without fresh air replenishment, leading to hypoxia, suffocation, and potentially death. Additionally, most car interiors are made of PVC (polyvinyl chloride) derived from petroleum, and the adhesives used contain formaldehyde. In an enclosed space, occupants are prone to dizziness. 2. If the air conditioning is running, the car produces significant amounts of carbon monoxide. The concentration of carbon monoxide increases over time, exceeding safe levels within approximately 20 minutes, causing noticeable suffocation symptoms.
4
1
Share

How to Repair a Blocked Expansion Valve?

Here are the methods to repair a blocked expansion valve: 1. For dirt blockage, if it is not very severe, replacing a dry filter is sufficient; if it is very severe, it is necessary to clean the impurities in the system pipeline again, vacuum, and recharge the refrigerant. 2. For slight ice blockage, you can apply a hot towel to the ice blockage area; if the ice blockage is more severe and has affected the normal operation of the system, it is necessary to clean the moisture in the system pipeline again, vacuum, and recharge the refrigerant. 3. Expansion: The main cause of dirt blockage is the presence of impurities in the system, such as welding slag, copper chips, iron chips, fibers, etc. The cause of ice blockage is excessive moisture in the system.
18
5
Share

How much horsepower does the Toyota Prado 2700 have?

Toyota Prado 2700 has a maximum power output of 120kW (163 horsepower) at 5200 rpm. Relevant information about the Toyota 2700 is as follows: 1. The Toyota Prado 2700 is equipped with a newly developed Toyota 2TR-FE engine, a four-cylinder electronic fuel injection system with a displacement of 2694cc. It offers excellent power performance and meets the latest Euro III emission standards, making it highly environmentally friendly. 2. The advanced engine of the Toyota Prado 2700 provides strong output power and torque, paired with a highly robust frame and reinforced suspension system, resulting in impressive off-road capability and passability.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.