What are the dimensions of the Buick Excelle?

2 Answers
McThomas
07/24/25 10:32am
The body dimensions of the Buick Excelle are as follows: Length (mm): The length is 4609mm. Width (mm): The width is 1798mm. Height (mm): The height is 1486mm. Wheelbase (mm): The wheelbase is 2640mm. Additional information: Background: The all-new Buick Excelle was officially launched on October 16, 2017, and for the first time introduced General Motors' new-generation 1.3T/1.0T Ecotec dual-injection turbocharged engines. In 2018, the Super Connected Edition was introduced, featuring an upgraded version of the Buick eConnect connectivity technology and a redesigned in-vehicle human-machine interface. Configuration: In terms of safety features, the 2018 new Excelle is equipped with the SBZA side blind zone warning system, TPMS intelligent tire pressure monitoring system, rear parking radar, Bosch ESP9.1 electronic stability control system, laser-brazed integrated roof, and electronic anti-glare interior rearview mirror.
Was this review help?
2
4
Share
DelChloe
08/11/25 5:37am
I've been driving a Buick Excelle for several years, and the size of this car is truly suitable for urban commuting. The car is approximately 4600 mm in length, about 1800 mm in width, 1460 mm in height, with a wheelbase of 2640 mm. It's very easy to handle in daily driving, and parking is not a problem even in tight spaces due to its small turning radius. The interior is spacious, and three adults can sit comfortably in the back with enough legroom. The trunk capacity is also reasonable, more than enough for large backpacks or shopping bags. The overall weight is well controlled, ensuring the fuel consumption isn't too high, and it's stable on the highway. Every time I drive it, I feel the size design is very thoughtful—not too small to lack presence, nor too big to be unwieldy. Buick has struck a great balance.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

Where is the mechanical keyhole of Toyota Camry?

Toyota Camry's mechanical keyhole is located next to the one-touch start button on the driver's seat. It can be used to start the vehicle when the one-touch start function fails. The following are precautions for using the one-touch start function: 1. Turning off the engine while driving: In case of an emergency during driving, the owner can turn off the engine by pressing the engine start/stop button for more than 3 seconds or pressing it three times consecutively. At this time, the power will switch to ACC mode. 2. Insufficient battery or malfunction of the smart key: If the smart key battery is low or the smart key is not working properly, the battery should be replaced promptly. If the vehicle needs to be used, the door can be opened with the mechanical key and the smart key can be inserted into the smart key cylinder to start the engine.
11
4
Share

What Causes the Failure of the Clutch Master Cylinder?

The reasons for the failure of the clutch master cylinder are as follows: 1. The welding angle of the clutch release rocker arm exceeds the tolerance. 2. The eccentric pin nut connecting the clutch pedal to the master cylinder is loose. 3. There are issues with the pressure plate and driven plate of the clutch driven disc assembly. 4. Excessive clearance in the shift linkage mechanism causes resistance. Additional information: Symptoms of a faulty clutch master cylinder: 1. The clutch pedal feels soft and lacks force. 2. Gear shifting produces grinding noises. 3. The cause of damage includes prolonged use, damaged dust cover, heavy clutch pressure plate, and excessive clutch pedal operation. 4. Oil leakage, incomplete clutch disengagement, etc., affect the normal operation of the vehicle, increase fuel consumption, and pose safety hazards. 5. The car jerks, and the clutch sometimes does not disengage completely. In most cars, this is most noticeable in first gear, where jerking is very obvious after releasing the clutch.
18
3
Share

What does cold tire pressure mean?

Cold tire pressure: 1. Cold tire pressure refers to the tire pressure at normal temperature (room temperature). After driving, the car can reach normal temperature after being parked for 1-2 hours, and the tire pressure at this time is the cold tire pressure. 2. Secondly, the tire pressure alarm indicates that one or more tires have abnormal pressure, either below or above the standard value. It is recommended to visit a tire repair shop as soon as possible to check for air leaks, insufficient air, or excessive tire pressure. Additional information is as follows: Effects of low or high tire pressure: 1. Tire pressure will rise or fall with changes in temperature and tire temperature. Generally, for cars and SUVs, the tire pressure when cold is around 2.3-2.5 bar. 2. Both low and high tire pressure can affect the service life of the tire. 3. If the tire pressure is too low, the radial deformation increases, causing excessive deformation on both sides of the tire wall, leading to shoulder wear on the tread. This also increases the tire temperature, significantly reducing the tire's service life. 4. If the tire pressure is too high, the tire's rigidity increases, deformation and contact area decrease, resulting in higher unit pressure in the center of the tread and accelerated wear. 5. This leads to central tread wear, affecting comfort and reducing the tire's lifespan.
16
2
Share

Which button is for the cold air in Lexus?

The cold air button in Lexus is the AUTO button. Below are detailed introductions about it: 1. Introduction One: The Lexus LS is the only D-segment car in the Lexus lineup, perfectly integrating comfort, powerful performance, excellent handling, and safety. 2. Introduction Two: The grand and smooth exterior design, along with numerous user-friendly interior features, fully embodies the Lexus L-finesse, elegance, and understated design philosophy. 3. Introduction Three: The Lexus LS is equipped with a 4.6 to 5.0-liter V8 engine, paired with an 8-speed automatic transmission.
15
0
Share

Is There a Problem with Pressing the Lock Button Multiple Times?

Pressing the lock button multiple times is not a problem. Here is some related information about car locking: 1. Locking Operation: If the car's lock light does not illuminate, it means the vehicle has not successfully completed the locking operation. Some car models provide a light prompt when locking, usually the hazard warning lights will flash once. If there is no prompt from the lighting system when locking. 2. Anti-theft System Malfunction: The anti-theft system will only complete the locking operation when it is in the off state. Additionally, some models are equipped with a one-button start feature. If the vehicle is not turned off, even if all doors are closed, the anti-theft system cannot complete the locking operation.
19
4
Share

How many kilometers does the clutch need to be replaced?

The general lifespan of a clutch plate is around 100,000 kilometers. Additional information: There are three situations when the clutch needs to be replaced immediately: 1. When driving, if you suddenly smell a burning odor, you should immediately turn on the hazard lights, pull over to the right, and check. The presence of a burning smell indicates that the clutch plate may be severely worn. Continuing to drive could lead to an accident. 2. If you feel a noticeable jerk when shifting gears, and it's not due to other car issues or the driver's technique, it's most likely the clutch plate. You should take it to a repair shop. If the wear is severe, replacement is necessary. 3. If you hear a metallic grinding sound when releasing the clutch, this indicates significant wear on the clutch plate, and it should be replaced immediately.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.