What are the dimensions of the Buick Encore GX?

2 Answers
JeffreyLee
07/28/25 8:10pm
The dimensions of the Buick Encore GX: length 4463 mm, width 1813 mm, height 1642 mm, with a wheelbase of 2640 mm. The interior space of the Buick Encore GX is relatively spacious. The front-wheel-drive version of this car has a trunk capacity of 415 liters, while the four-wheel-drive version has a trunk capacity of 399 liters. The Buick Encore GX is equipped with a 1.3-liter turbocharged three-cylinder engine across the lineup, delivering a maximum power of 165 horsepower and a maximum torque of 240 Nm. The engine can output its maximum power at 5600 rpm and its maximum torque between 1500 to 4000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
13
2
Share
MacIsla
08/12/25 12:59am
I've been researching SUV dimensions lately, and the Buick Encore GX's body size is quite thoughtful. It measures 4463 mm in total length, which is approximately 4.46 meters, with a width of 1813 mm, height of 1642 mm, and a wheelbase of 2640 mm. This size is particularly convenient for city driving, with a moderate turning radius that makes parallel parking less challenging. Compared to other compact SUVs I've driven, like the T-Cross, it's slightly longer but lower in height, which seems to reduce wind resistance at highway speeds. The trunk can easily accommodate two 28-inch suitcases, and the rear seats aren't too cramped for three adults. On weekends when I take my family on outings, loading tents and groceries is effortless—it's truly the golden size for a family vehicle.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What Causes a Noticeable Voltage Drop When the Car Air Conditioner is Turned On?

Turning on the air conditioner adds two electrical loads—the compressor and the high-speed fan—which can cause a slight voltage drop, a phenomenon that is generally normal. When starting the car, if the battery voltage does not drop below 9.5 volts (or 19 volts for some systems), the battery is functioning correctly, though it's best to maintain a voltage above 9.5 volts. Additional Information: While the air conditioner's power consumption may not seem high overall, during low-speed driving and startup phases, it accounts for a significant proportion of the power draw, making it easy to notice a noticeable drop in performance. However, at medium to high speeds, this effect becomes less apparent. The larger the engine's reserve power, the less noticeable the impact of the air conditioner. Conversely, in smaller-displacement engines, the effect of the air conditioner is more easily felt.
10
1
Share

What Causes Body Shaking When Lightly Pressing the Accelerator?

Reasons for body shaking when lightly pressing the accelerator: Fuel system issues: Most fuel system problems are caused by clogged fuel lines, leading to poor fuel supply. Symptoms include engine vibration, unstable idling, and stalling while driving. Additionally, fuel pump failure may also cause engine vibration. To diagnose fuel pump issues, disconnect the fuel line and check the flow rate and volume. Electrical issues: Check if the ignition timing is correct, as most ignition problems are related to timing. Inspect whether the spark plugs are worn out, if the gaps are similar, and if the gaps have changed. Furthermore, malfunctioning distributors may also cause engine vibration. Mechanical reasons: Check the engine's operating condition for any abnormal noises, such as valve sounds. Inspect the belt's working condition to see if it is loose.
6
5
Share

Is it normal for a car's exhaust pipe to be extremely hot?

It is completely normal. The temperature of the exhaust gases emitted by a car can reach as high as 800-1000 degrees Celsius. Below is some relevant information: Exhaust pipe: The car exhaust bellows, also known as the car exhaust flexible hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler. It allows the entire exhaust system to have flexible connections, thereby reducing vibration and noise, facilitating installation, and extending the lifespan of the exhaust muffler system. Applicable models: It is mainly used for light-duty vehicles, micro vehicles, and buses. Its structure consists of a double-layer bellows covered with a steel wire mesh sleeve, with clamping rings on both straight sections. To achieve better noise reduction, the bellows can be equipped with expansion joints or mesh sleeves inside. Material: The main material is stainless steel SUS304, and the clamps and connecting pipes can be made of stainless steel or aluminized steel.
2
0
Share

What Causes Rich Fuel Trim?

The reason is that the air-fuel mixture is too rich, and there may be an issue with the oxygen sensor. It is necessary to have it inspected at a 4S shop, as these problems can be repaired. The LaCrosse adopts Buick's latest family design language, featuring smooth and elegant body lines and a highly dynamic body proportion. The full LED automatic sensing headlights with wing-shaped design use Evonik material to create a uniform light curtain effect. More details are as follows: Fault: A phenomenon where the equipment "loses its specified function" or poses a safety hazard during operation due to certain reasons. Failure is sometimes referred to as a fault, or the loss during equipment operation can also be considered a fault, but these faults are repairable. Specified function refers to the function clearly defined in the equipment's technical documentation. Explanation: A phenomenon where the equipment "loses its specified function" or poses a safety hazard during operation due to certain reasons. Specified function refers to the function clearly defined in the equipment's technical documentation. Failure is sometimes referred to as a fault, or the loss during equipment operation can also be considered a fault, but these faults are repairable.
16
3
Share

What type of oil should be used for a gasoline generator?

Gasoline generator oil can be categorized into summer oil, winter oil, and all-season oil. Therefore, the type of oil to use depends on the generator model and the regional environment where it is operated. It is best to follow the specifications outlined in the generator's user manual. More details are as follows: Function of oil: Oil serves to reduce friction, assist in cooling, prevent corrosion and rust, provide cushioning, and dampen vibrations in the engine. It is often referred to as the "lifeblood" of the generator. Working principle: Inside the engine, between the piston and cylinder, an oil film is necessary to prevent excessive wear on these components. Oil forms a sufficiently thick film to separate the surfaces of these moving parts, reducing wear. Additionally, since oil operates at a lower temperature, it helps dissipate heat by carrying it back to the oil tank, thus aiding in cooling the engine.
5
3
Share

What does MOT mean in the automotive industry?

In the automotive industry, MOT stands for Moment of Truth, which is a critical moment in the industry. MOT is a key performance indicator that specifically measures customer orientation, as customers tend to remember only these pivotal moments. There is a significant branch in satisfaction research called Moment of Truth (MOT) research, a technique frequently used in human-centric services for satisfaction analysis. Promoting MOT may yield the following expected benefits: Standardization of service quality: improving service levels and reducing service disputes; Training high-quality employees: through comprehensive MOT training, employees genuinely care for customers and enhance their problem-solving skills; Strengthening interpersonal relationships: during service interactions, employees engage in personal marketing with customers, expanding their personal networks; Improving work efficiency: assisting frontline employees in providing complete responses and handling customer inquiries promptly.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.