What are the dimensions of the BMW 8 Series Convertible?

What brand has a car logo with the character 'Song'?

The car logo featuring the character 'Song' belongs to the BYD brand. Here are some details about the BYD Song: 1. Dimensions: The vehicle measures 4600mm in length, 1830mm in width, and 1700mm in height, with a wheelbase of 2600mm. As a compact SUV, it offers a reasonably expanded cabin space with ample room. The trunk can be extended to a maximum depth of 1.86 meters and is mostly flat, providing high practicality. 2. Powertrain: It is equipped with a 1.5T direct-injection turbocharged engine, delivering a maximum power of 113kW and a peak torque of 240Nm. It comes with either a 6-speed manual or a 6-speed wet dual-clutch transmission, offering performance and fuel efficiency that are top-tier in its class and price range. 3. Safety: Standard safety features include an ESP body stability system. The suspension consists of a front MacPherson strut and a rear multi-link independent setup, ensuring a satisfactory level of safety and driving comfort.

8

5

Share

How to Use the Cruise Control in Volkswagen Teramont?

Volkswagen Teramont's cruise control system can be activated using the control buttons on the left side of the steering wheel. Press the 'set' button when the speed is above 40 to engage cruise control, and use the '+' and '-' buttons to accelerate or decelerate. Below is an introduction to the cruise control system: 1. The Cruise Control System (CCS), also known as speed control device or autonomous driving system, allows the vehicle to maintain a set speed without the driver needing to press the accelerator pedal once the system is activated. 2. This system is particularly useful for long-distance highway driving, as it reduces driver fatigue by eliminating the need to control the accelerator pedal and minimizes unnecessary speed variations, thereby saving fuel. 3. The working principle of the cruise control system involves the cruise control module comparing the pulse signal from the vehicle speed sensor with the set speed and issuing commands to the servo mechanism to adjust the throttle opening, ensuring the vehicle maintains the preset speed. 4. The electronic multifunction cruise control system eliminates the mechanical control parts of the traditional cable-type cruise control, adopting precise electronic control for more accurate operation and reducing the risk of mechanical failures.

20

3

Share

What Materials Are Required for Vehicle Inspection?

Materials required for vehicle inspection: 1. Original copy of the compulsory traffic accident liability insurance certificate; 2. Safety technical inspection qualification certificate; 3. Original and photocopy of the vehicle license; 4. Proof of payment for vehicle and vessel usage tax. Vehicle inspection process: 1. Fill out two forms: the motor vehicle license application form and the motor vehicle inspection record form; 2. Proceed to the annual inspection entry window for material review and entry; 3. Visit the violation query window; if there are any violations, pay the fines here; 4. Have the vehicle undergo an external inspection by an inspector, which includes opening the hood and verifying the chassis number. The inspector will provide a signed inspection pass page to take to the inspection fee payment window for an invoice; 5. Go to the inspection login window and leave all materials there; 6. Queue up for the inspection, and after completion, receive an inspection report; 7. Submit the annual inspection materials to the staff; 8. Upon passing the annual inspection, receive the annual inspection sticker.

1

3

Share

Can You Start the Car with Push-Button Start Without Pressing the Brake?

Push-button start without pressing the brake cannot start the car. Pressing the brake prevents the car from suddenly moving forward, which is a safety design. Automatic transmission cars with push-button start require the brake pedal to be pressed before starting. Additionally, before starting, ensure the gear is in the P position. When the car is off, pressing and holding the push-button start for 3 seconds without pressing the brake will only power on the car without starting it. Some models require pressing the ignition switch twice. Correct steps for push-button start and stop: 1. After sitting in the driver's seat, press the start button once—the ACC light will turn on. Press it once more, and the car will perform a self-check. 2. Press the brake and push the start button to ignite the engine. 3. Release the foot brake and choose to warm up the car, with the duration depending on the environment. 4. Press the foot brake again, shift to D gear, release the handbrake, slowly release the foot brake, and gently press the accelerator to complete the start.

9

0

Share

What Causes Low Pressure or Negative Pressure in Car Air Conditioning?

This phenomenon is most commonly caused by the closure of the expansion valve or blockages in components such as the dryer filter. It is recommended to first check whether the expansion valve is in the open position and ensure it is functioning properly. Next, turn off the air conditioning, wait for the high and low pressures to balance, and then restart the air conditioning to locate the approximate position of the refrigerant blockage. In these locations, components like the dryer filter and valves are likely to be clogged with dirt. Introduction to Car Air Conditioning: The car air conditioning system (air-conditioning-device), commonly referred to as car AC, is used to regulate and control the temperature, humidity, air cleanliness, and airflow within the car cabin to optimal levels. It provides a comfortable environment for passengers, reducing travel fatigue, and creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving as a ventilation device. Air Conditioning Layout: Different types of air conditioning systems have varying layouts. Currently, the most widely used in passenger cars is the integrated heating and cooling air conditioning system. Its layout involves assembling components such as the evaporator, heater core, centrifugal blower, and control mechanisms together, referred to as the air conditioning unit assembly.

11

1

Share

Where is car modification legal?

In China's traffic laws, there are clear regulations restricting unauthorized car modifications. The specific details about car modifications are as follows: 1. Parts of the car that can be modified: According to the documents related to car modifications in the "Motor Vehicle Inspection Work Regulations," modifications such as roof racks, entry/exit steps, radiator grilles, bumpers, and wheels have become legal items. 2. Prerequisites for car modification projects: (1) Modification of roof racks: The installed rack must not alter the vehicle's length, width, or main body structure, and the height of the rack must be less than or equal to 300mm. (2) Modification of entry/exit steps: Step boards can be modified, but they must not change the vehicle's length, width, or main body structure. (3) Replacement of radiator grilles and bumpers: Radiator grilles and bumpers can be replaced without altering the vehicle's length, width, or main body structure, but it must be ensured that the modified bumper does not obscure the license plate. (4) Modification of wheels: Wheels can be replaced without changing the vehicle's length, width, or main body structure, but the wheel size must match the original factory specifications.

13

5

Share

What are the dimensions of the BMW 8 Series Convertible?

What brand has a car logo with the character 'Song'?

How to Use the Cruise Control in Volkswagen Teramont?

What Materials Are Required for Vehicle Inspection?

Can You Start the Car with Push-Button Start Without Pressing the Brake?

What Causes Low Pressure or Negative Pressure in Car Air Conditioning?

Where is car modification legal?

Is Flashing Three Times in a Row Considered a Traffic Violation?

What is another name for the Prado?

What is Anttna tire?

How to Reset the Maintenance Reminder on Geely Boyue?