What are the dimensions of the Bestune T99?

1 Answers
MacFrank
07/29/25 8:10pm
The dimensions of the Bestune T99 are 4800mm in length, 1915mm in width, and 1695mm in height, with a 5-door, 5-seat SUV body structure. The Bestune T99 is a mid-to-large-size SUV from FAW Bestune, equipped with a 2.0T 224 horsepower L4 engine and a 6-speed automatic transmission. The engine has a maximum power of 165kW and a maximum torque of 340Nm. The Bestune T99 adopts a turbocharged intake form, with a minimum ground clearance of 192mm, a top speed of 210km/h, and a 0-100km/h acceleration time of just 8.6 seconds. The fuel tank capacity is 60 liters. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
Was this review help?
1
5
Share
More Forum Discussions

How to reset the maintenance reminder on Changan Raeton?

There are two buttons on the dashboard, one for adjusting the trip mileage and one for adjusting the time. First, reset the trip mileage to zero, then press and hold the trip mileage button without releasing it. At the same time, turn off the ignition key and then turn it back on. Release the button, then press and hold both buttons simultaneously for 3 seconds before releasing to complete the process.
17
2
Share

What to Do When the Changan Eado Car Key is Locked Inside the Car?

Generally, when purchasing a car, you will receive one or two spare keys. If conditions permit, retrieving the spare key is the most convenient and cost-effective solution. You can also dial 114 to obtain the contact information of a professional locksmith company registered with the public security department. There are specialized car door unlocking services available. By providing the owner's ID card and proof of vehicle ownership, you can access professional unlocking services.
8
1
Share

How to Remove the Headrest of a Changan Car Seat?

First, unscrew the two plastic rings under the headrest, then use a thin screwdriver to pry open the headrest along the metal rod. After prying it open with force, you will see a small iron ring inside. Insert the screwdriver and gently pull outward while turning counterclockwise. At the same time, hold the headrest and lift it upward to find one side of the iron rod pried out. Repeat the same process for the other side. Then, the headrest can be removed.
18
4
Share

How to Open the Fuel Tank Cap of Changan Oushang?

With the vehicle unlocked, simply press the fuel tank cap by hand to open it. Note that the fuel tank cap must be opened when the car is unlocked. The fuel tank cap is controlled by a switch button inside the car. Press the fuel tank switch button directly to open it. The electronic button is located on the left front door panel or on the center console. Alternatively, use the key to unlock the fuel tank cap directly. Some cars have a press-type or flip-open cap; after opening the cap, use the mechanical key to unlock it.
20
4
Share

How to Replace the Front Bumper of Changan Oushang X5?

Pry open the clips on the grille, then hold the left and right sides of the front grille with your hands and gently pull outward to separate the front grille from the front bumper. Remove the upper, lower, left, and right screws of the front bumper. Use a flathead screwdriver to pry open the clips securing the left and right sides of the front bumper. Hold the corners of the front bumper with your hands and gently pull outward to separate the front bumper from the vehicle body. Disconnect the wiring harness connectors for the fog lights on both sides.
14
4
Share

What is the normal tire pressure for Mercedes-Benz E-Class?

The tire pressure for Mercedes-Benz E-Class should be between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international standard GBT2978-2008. The tire pressure of the Mercedes-Benz E-Class is displayed on the multifunction screen, between the two dials. It will show the tire pressure and issue a warning if the pressure is too high or too low. The standards for too high or too low are based on the safe tire pressure set by the owner. Generally, a tire pressure exceeding 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates localized wear of the tread center, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing safety risks; increases movement of tire parts, leading to abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator lights up (a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tire needs to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system still records the previous data, causing the indicator to light up. Simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.