What are the dimensions of the Bestune T99?

2 Answers
AryaFitz
07/24/25 1:36am
The Bestune T99 has a length of 4502 mm, a width of 1839.4 mm, and a height of 1437 mm. The Bestune T99 is a new mid-to-large-sized SUV under the FAW Bestune brand, which overall continues the design style of the T77 with a large front grille. The interior features a dot-matrix design, with slender headlight clusters on both sides, expected to use LED light sources. The rear design adopts a continuous taillight cluster layout, with a dual-exhaust setup on both sides, creating a sense of layering. This car is equipped with a 1.2-inch continuous large screen, composed of a full LCD instrument panel and a central control display screen, paired with the original 3D holographic intelligent control system from the Bestune T77, giving it a strong technological feel. The new yacht-style design further enhances the car's technological appeal.
Was this review help?
15
1
Share
DeNaomi
08/10/25 9:10pm
The dimensions of the Bestune T99 are quite impressive, with a total length of 4.8 meters, width of 1.915 meters, and height of 1.685 meters. I’ve driven it several times, and these measurements left a deep impression on me. As a midsize SUV, its size balances both presence and practicality, especially the over-1.9-meter width, which comfortably seats five adults without feeling cramped, and the rear floor is completely flat. During weekend family camping trips, the trunk easily fits a barbecue grill and folding bikes, while the 1,685mm height makes loading and unloading luggage effortless without bending over. My neighbor, who just got the car last month, mentioned that its dimensions make it more agile than the Highlander, with a reasonable turning radius and no stress when parallel parking in older residential areas. Overall, the space utilization is well-executed.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

How often should water be added to the engine radiator?

Adding water is not done at fixed intervals but depends on vehicle usage. If the car is frequently used or primarily for long-distance travel, regular attention to the radiator's condition is necessary. When adding water, there are minimum and maximum level marks, and it is generally best to fill to the middle position. Below is relevant information: If the water level in the antifreeze tank falls below the minimum mark (normal capacity should be between MIN and MAX), water should be added promptly. The replacement cycle is typically every two years or every 30,000-40,000 kilometers driven. Vehicles with high usage frequency should consider earlier replacement. Precautions: To prevent excessive foaming, which reduces the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding. Long-life antifreeze can remain effective for up to three years.
3
0
Share

What to Do When Encountering Traffic Restrictions Midway on an Elevated Road?

When encountering traffic restrictions midway on an elevated road, you should exit the elevated road as soon as possible before the restriction period begins. If you continue driving on the elevated road during the restriction period, it will be considered as entering a restricted zone, violating regulations, and subject to a fine with 3 penalty points. The pollutants emitted from vehicle exhaust can undergo chemical reactions with high temperatures, leading to increased ozone levels, which severely impact the ecological environment. Therefore, implementing traffic restriction measures can effectively reduce the number of vehicles on the road. According to French Minister of Ecology Delugy, when the restriction mechanism is activated, 35% of vehicles will be prohibited from driving, which can reduce two-thirds of exhaust emissions, benefiting the healthy and sustainable development of society.
13
5
Share

What are the methods for repairing car paint protection film?

Here are the methods for repairing car paint protection film: 1. Sun exposure: Modern paint protection films come with a coating layer. If the scratches are very shallow and minor, simply exposing the film to direct sunlight for several hours can repair them. 2. Heating with a heat gun or hair dryer: If sunlight doesn't work, the scratches might be slightly deeper. As long as the film layer isn't penetrated, using a heat gun or hair dryer can help. This treatment works on the coating layer through thermal expansion and contraction, allowing the coating to fill in the scratched areas. 3. Using a three-in-one technology paint protection film maintenance solution: This technology was developed by Madico and licensed to several well-known brands. The maintenance solution produced with this technology can repair minor scratches. Its principle differs from the previous two methods, as the three-in-one technology works by filling and concealing the scratches.
18
2
Share

Will the first drunk driving offense be recorded in the personal file?

Yes, the first drunk driving offense will be recorded in the personal file. If it is a minor case of drunk driving, the records may not be permanently stored, but the traffic violation will be recorded for life in the traffic police information system. If the driver commits drunk driving again, they will face detention for up to 10 days, a fine, revocation of their motor vehicle driving license, and a ban from reapplying for a driving license for 2 years. If the driver is found guilty of drunk driving (with a blood alcohol content exceeding the legal limit), they will be charged with dangerous driving, a criminal offense. In addition to the revocation of their driving license, according to Article 133 of the Criminal Law, they will also face criminal detention and a fine. The record of drunk driving in their personal file will be permanently stored and cannot be erased.
1
5
Share

Must the Connecting Rod Be Replaced After Water Submersion?

In such cases, as long as there was no secondary startup, it is generally not necessary to replace the connecting rod. Simply removing the spark plugs and draining the water from inside the engine is sufficient. Below are some potential hazards associated with water-submerged vehicles: 1. Damage to computer integrated circuits: These circuits can become oxidized due to immersion, often requiring inspection and replacement; otherwise, the vehicle may not operate properly. Since many electronic components cannot be opened at once, they may appear fine during repairs but could develop faults during later use. These issues mean that some 'water-submerged vehicles' may experience malfunctions even after repairs. 2. Engine damage: The electronic control system inside the vehicle can be harmed. The engine is particularly at risk—never attempt to start or turn the engine after water submersion, as this can cause severe deformation of the connecting rod. Additionally, interior components like carpets and seats may deform, become rough, or develop odors and bacterial growth due to prolonged soaking.
13
0
Share

Are Electric Vehicles Afraid of Being Flooded?

Electric vehicles are generally afraid of being flooded because they consist of three major components: the motor, controller, and battery. Even with waterproof designs, they cannot withstand prolonged flooding. Below is relevant information about why electric vehicles are afraid of being flooded: 1. Introduction to Electric Vehicles: Electric vehicles (BEVs) refer to vehicles powered by onboard power sources, driven by motors to move the wheels, and meeting all requirements of road traffic and safety regulations. 2. Protection Level: Compared to traditional vehicles, electric vehicles do not have internal combustion engines, so there is no need to worry about air intake and exhaust issues. As a result, their water-wading capability is far superior to that of fuel-powered vehicles, generally allowing normal operation in water depths of up to 40 cm. The engine compartment of an electric vehicle is neatly arranged, with core components such as the electronic control unit and motor having sufficient protective measures. The motor is fully enclosed and does not need to connect with the outside. Moreover, to ensure safety, the power assembly and cable input connectors of electric vehicles usually meet IPX4 or IPX5 protection levels.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.