What are the dimensions of the Baojun 730 in terms of length, width, and height?

2 Answers
DeNorah
07/28/25 5:01pm
The length, width, and height dimensions of the Baojun 730 are 4780mm/1780mm/1740mm, which are official data. The length of the Baojun 730 refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetrical plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetrical plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Baojun 730 has a maximum power of 108kw and a maximum torque of 250 Nm. The maximum power speed of this engine is 5200 rpm, and the maximum torque speed ranges from 2200 to 3400 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. This engine is paired with a manual transmission (MT). The country has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
Was this review help?
20
2
Share
LaCharlie
08/11/25 11:33pm
I'm very familiar with the dimensions of the Baojun 730, which are 4780mm in length, 1780mm in width, and 1750mm in height. As an experienced driver who often uses this car to transport my family, I find these dimensions quite practical. The 4.78-meter length ensures the third-row seats aren't too cramped, keeping the kids from getting restless in the back. The 1.78-meter width isn't too broad, making garage access generally smooth, though you need to be cautious in narrow alleys of old city areas. The 1.75-meter height provides ample headroom, and with the sunroof, it feels even more spacious and less stuffy. However, the longer body means a larger turning radius, requiring extra glances at the rearview mirrors when making U-turns. Overall, I'd say these dimensions offer a balanced choice among MPVs. Parking isn't as easy as with smaller cars, but the generous space allows for more cargo, making it ideal for family trips.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What Causes a Hissing Sound When Braking?

The reasons for a hissing sound when braking are: 1. Use of low-quality or overly hard brake pads; 2. Presence of sand or foreign objects between the brake pads and brake discs; 3. Severe wear of the brake discs; 4. Brake pad warning. The function of brakes is to reduce speed or bring the vehicle to a stop. The working principle involves converting the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and brake drums, as well as between the tires and the ground, thereby slowing down or stopping the car. The causes of brake failure include: 1. Impurities or poor sealing in the brake master cylinder; 2. Failure of the vacuum booster pump; 3. Contaminated brake fluid; 4. Oil leakage from the brake master cylinder or wheel cylinder; 5. Air leakage from the air reservoir or pipe connections; 6. Severe overloading; 7. Carbonization of the brake drum; 8. Insufficient brake fluid in the brake master cylinder; 9. Wear of the brake master cylinder piston.
6
1
Share

Are Off-Road Vehicles Automatic or Manual Transmission?

Off-road vehicles are available in both automatic and manual transmissions. Automatic off-road vehicles come with excellent electronic assistance features, while manual transmissions allow for precise control over gear selection and speed on off-road tracks. Here are the relevant details: An off-road vehicle is specifically designed for rugged terrain, primarily referring to vehicles capable of operating on rough surfaces. Key features include a body-on-frame construction, four-wheel drive, high ground clearance, tires with superior traction, elevated exhaust pipes, substantial horsepower, and robust bumpers. Examples of off-road vehicles include the Toyota Prado, Ford Everest, Land Rover Defender, Mercedes-Benz G-Class, Jeep Grand Cherokee, Lexus LX, and Audi Q7, among others. The function of a manual transmission is to alter the gear ratio, also known as the gear ratio. Utilizing the principle of leverage, it amplifies engine torque through the largest diameter gear in the low-speed range with the longest radius, aiding the vehicle in initiating forward movement. A typical automatic transmission vehicle is equipped with six gear positions, arranged from top to bottom as P, R, N, D, S, and L. The most common automatic gear positions are Park (P), Reverse (R), Neutral (N), and Drive (D).
8
5
Share

How to Remove the Steering Wheel Airbag on a Teana?

The steps to remove the steering wheel airbag on a Teana are: 1. Locate the screw hole on the left side of the steering wheel and loosen it using a T40 tool. Note that the screw cannot be completely removed due to an internal stopper. 2. Find the screw hole on the right side and loosen it with the T40 tool as well. 3. After loosening the fixing screws on both sides, separate the driver's airbag from the steering wheel. It cannot be completely removed at this stage as it is still connected by the clock spring wiring harness. 4. The driver's airbag is also connected to the clock spring wiring harness at the back, which needs to be detached. 5. Use a small flathead screwdriver to release the fixing clip of the wiring harness to make it unfastened. 6. Use the small flathead screwdriver to disengage the yellow locking mechanism of the connector. Note that the yellow part must be released first before the black part underneath can be detached. 7. After releasing the locking mechanism, use the small flathead screwdriver to pry open the black connector part, and then the main airbag can be completely removed.
16
5
Share

How Often Should You Change the Oil in a New Car?

For a newly purchased car, the oil should be changed approximately every 6 months or after driving around 5,000 kilometers. The steps for changing the oil are as follows: 1. Lift the car, remove the underbody shield, and place a container beneath the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after the oil has completely drained and wipe it with a tissue to check for leaks; 3. Reinstall the underbody shield and lower the car, then use a funnel to add new oil through the filler port. The functions of engine oil include: 1. Separating the surfaces of relatively sliding parts to reduce wear; 2. Carrying heat back to the oil pan and dissipating it into the air to help the radiator cool the engine; 3. Circulating carbon deposits, sludge, and worn metal particles from engine components back to the oil pan, flushing away contaminants generated on the working surfaces of the parts through the flow of the lubricating oil.
16
3
Share

How to Check Driving License Information on 12123?

First, open the Traffic Management 12123 APP and click on the 'Driving License' option in the upper left corner of the homepage to access the driving license interface where you can view the electronic version of your driving license. For regions where the electronic driving license feature is not yet available, you can also use the driving license QR code. Scanning this QR code will allow you to read your driving license information.
4
5
Share

How to adjust the valves of a 170 gasoline engine?

First, remove the spark plug and take off the pull cord starter. Take out the valve clearance measuring tool, then loosen the nuts on both the upper and lower rocker arms. Insert a 10mm feeler gauge beneath the rocker arm. Tighten the rocker arm nuts and remove the feeler gauge to complete the operation.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.