What are the dimensions of the Baojun 530?

2 Answers
Alexia
07/24/25 6:25pm
The dimensions of the Baojun 530 are 4695mm in length, 1835mm in width, and 1750mm in height, with a wheelbase of 2750mm. In terms of configuration, this vehicle is equipped with LED daytime running lights, front and side airbags for both the driver and front passenger, head airbags for the front and rear rows, tire pressure monitoring system, child seat anchors, brake assist, electronic stability control, keyless entry and start system, rearview camera, and front parking sensors. This model comes with two engine options: a 1.8-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.8-liter naturally aspirated engine delivers maximum power at 5600 rpm and peak torque between 3600 to 4600 rpm, while the 1.5-liter turbocharged engine produces maximum power at 5200 rpm and peak torque between 2200 to 3400 rpm.
Was this review help?
3
1
Share
LaJude
08/11/25 10:16am
I remember when I test-drove the Baojun 530 at the 4S dealership, I specifically measured its dimensions with a tape measure. The car is 4655 mm long, approximately 4.65 meters, noticeably longer than a typical sedan. The width of 1835 mm is particularly practical—three adults can sit in the back without squeezing shoulders, and even my 1.9-meter-tall friend didn’t feel cramped in the front passenger seat. The height of 1760 mm is standard for an SUV, making entry and exit effortless without bending over, and the trunk can fit a large stroller vertically. However, the longer body makes U-turns in narrow alleys a bit tricky, requiring an extra steering turn compared to smaller cars. The 2750 mm wheelbase is excellent for its price range, and the completely flat rear floor deserves praise—my elderly family members found it very comfortable for long trips, saying their legs and feet felt at ease.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What brand is Goform tire?

Goform is a tire brand under Guofeng. It is a product launched by Shandong Guofeng Rubber & Plastic Co., Ltd., a purely domestic tire manufacturer. The company produces car tires and semi-steel radial tires. Established in 1994, Shandong Guofeng Rubber & Plastic Co., Ltd. has introduced various advanced production and testing equipment from Germany, Italy, South Korea, Japan, and other countries and regions. It also has a professional quality testing center and research institution. Covering an area of over 100,000 square meters, the company is a rubber enterprise primarily engaged in the production and sales of automobile, agricultural vehicle, engineering, and motorcycle tires. It is a technologically advanced manufacturer in the domestic tire industry, equipped with advanced tire production lines, mainly producing the "Guofeng" brand "Shuangsheng," which is exported to over a dozen countries in Southeast Asia. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance, as well as high wear resistance and flex resistance, along with low rolling resistance and heat generation. Directly in contact with the road surface, tires work together with the car suspension to mitigate the impact during driving, ensuring good ride comfort and smoothness. They also ensure good adhesion between the wheels and the road, improving the car's traction, braking, and off-road capability, while bearing the weight of the vehicle. Guofeng tire maintenance methods: Enhance awareness of tire safety and inspect tires regularly. Periodically correct wheel balance, as unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Regularly rotate tires. To maintain even wear on all tires of the same vehicle, perform tire rotation every 5,000 kilometers. In daily use of Guofeng tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove stones stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden stops to prevent accelerated tread wear from dragging on the ground.
5
2
Share

What gear should an automatic car be in when going downhill?

When going downhill in an automatic car, you should first slow down and then shift to L gear. Here is a related introduction to downhill driving: L gear: When going down a mountain or a long slope, shifting to L gear limits the car to the lowest gear (equivalent to first gear in a manual car), allowing the car to use engine braking when going downhill. This prevents the driver from having to press the brake for a long time, which could overheat the brake pads and cause danger. Note: When driving an automatic car, remember not to shift to neutral at a red light or when going downhill. Instead, keep it in drive gear and control the speed using the gear and brakes to avoid accidents.
1
0
Share

Will I get points deducted for making a left turn into the wrong-way lane and reversing?

Making a left turn into the wrong-way lane and reversing will result in points being deducted, as this constitutes the illegal acts of driving against the traffic and not staying in the correct lane. Below are some precautions to take when turning a car: Pay attention to speed: You should slow down within 50 to 100 meters before the turn, use the turn signal to indicate your direction, and make sure to turn slowly, watch as you turn, and pass through safely. Be observant: When turning, you should closely monitor the inside of your car's turn to avoid getting too close to the roadside and hitting pedestrians. Additionally, you need to watch out for other vehicles, as well as pedestrians, bicycles, or motorcycles that might be too close to your car and trying to compete for the lane.
13
2
Share

What is the trick to maintaining clutch control in Subject 2?

Subject 2 maintaining clutch control trick is to press the clutch pedal all the way down after getting in the car, shift into first gear, and then gently release the clutch. The following is a related introduction to the Subject 2 test: Test content: includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. Passing standard: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", the Subject 2 test for C1 and C2 driving licenses has a total score of 100 points. Each item has deduction standards for failure (directly deducting 100 points), deducting 20 points, deducting 10 points, and deducting 5 points. A total score of over 80 points is considered a pass.
20
2
Share

Which button is the interior door release button for Lincoln rear doors?

The interior door release button for Lincoln rear doors is the B-pillar keypad door unlock button. Taking the Lincoln Navigator as an example, here are the specific details of the Lincoln Navigator: 1. Vehicle Positioning: The Lincoln Navigator is a luxury full-size SUV produced by Ford Motor Company, with dimensions of 5350mm*2073mm*1937mm. 2. Powertrain: It is equipped with a 5.4-liter V8 engine, delivering a maximum output power of 224 kW and a maximum torque of 490 N·m, providing robust performance. It is paired with a 6-speed 2F automatic transmission, offering either two-wheel or four-wheel drive.
15
2
Share

Where is the seat adjustment button located?

The seat adjustment button is typically located on the left or right side of the inner seat cushion or near the armrest. Here are some relevant details: 1. Prioritize controllability: Adjusting the car seat is the first thing a driver should do before driving. This includes setting the height, front/rear distance, and backrest tilt angle, which also affects the distance between your legs and the brake, accelerator, or clutch pedals. The overall adjustment should aim for comfort and optimal controllability. 2. Requirements: Generally, adjust according to your height to ensure that when your right foot fully depresses the accelerator, brake, or clutch pedal, your leg maintains a naturally slightly bent position. This indicates the most suitable front/rear seat distance.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.