What are the dimensions of the Audi S4?

1 Answers
StVanessa
07/29/25 6:17pm
The dimensions of the Audi S4 are 4749mm in length, 1842mm in width, and 1400mm in height, with a wheelbase of 2831mm. Below are the specific details of the Audi S4: 1. The Audi S4 is positioned as a mid-size sedan. The S series models can be considered as sportier customized versions of regular cars. Whether it's the suspension, engine, or other components, the tuning is more performance-oriented. 2. In terms of power, it is equipped with a 3.0-liter V6 turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 260KW, maximum horsepower of 354PS, and maximum torque of 500N·m. The fuel delivery system is entirely direct injection. The drivetrain is full-time four-wheel drive.
Was this review help?
12
3
Share
More Forum Discussions

Does Shifting an Automatic Transmission to Neutral Before Turning Off the Engine Damage the Car?

Shifting an automatic transmission to neutral before turning off the engine does not damage the car. Here is a detailed explanation regarding turning off the engine in neutral for automatic transmission vehicles: 1. Impact on the engine: When the vehicle is turned off in neutral, the engine speed decreases from idle to zero with minimal torque variation. The transmission exerts no counterforce on the engine, avoiding any shock in the process. Therefore, turning off the engine in neutral does not harm the vehicle's engine. 2. Impact on the transmission: With an automatic transmission in neutral, the torque transmission is interrupted, and the engine torque suddenly disappears. However, this has no effect on the transmission gears.
4
5
Share

Is There a Difference Between Direct Injection and Multi-Point Electronic Injection?

Multi-point electronic injection refers to the electronic injection system of an automobile engine, which generally consists of three major components: the fuel injection circuit, sensor group, and electronic control unit. Direct injection technology is a new type of fuel injection technology. The difference between multi-point electronic injection and direct injection lies in the fact that the injectors in multi-point electronic injection do not extend into the cylinder, whereas the injectors in direct injection do. Multi-point electronic injection technology is more mature, has higher combustion efficiency, is cheaper, and is also more convenient to maintain. On the other hand, direct injection technology is more advanced, offering better performance in terms of energy saving and emission reduction compared to multi-point electronic injection, but it tends to produce more carbon deposits in the engine.
19
2
Share

What Causes the Jerking Sensation When Releasing the Accelerator Pedal?

It is normal for automatic transmission vehicles to experience jerking sensations during gear shifts. The difference lies in the varying degrees of jerkiness felt across different vehicle types. If the gear shift timing is not optimal, jerking sensations are more likely to occur. For manual transmission vehicles, the jerking sensation during gear shifts is largely a matter of driving technique, often caused by poor coordination between the accelerator and clutch, or releasing the clutch too quickly. Below is a relevant explanation: Except for continuously variable transmissions (CVTs), jerking sensations are unavoidable in other types of transmissions. CVTs do not have the concept of gear shifts, so they naturally do not produce jerking sensations. However, in reality, even CVTs may exhibit a slight jerking sensation due to tuning adjustments.
3
1
Share

How High Can the Water Level Be for a Vehicle to Safely Wade Through?

Generally, as long as the water does not exceed two-thirds of the tire height, it is safe. Here is some related information about vehicle wading depth: 1. The maximum wading depth refers to the maximum depth that can be safely navigated through. Wading depth is an important indicator for evaluating a vehicle's off-road capability; the greater the maximum wading depth, the stronger its ability to wade through water. 2. The height of the air intake determines the wading depth. The primary factor that determines a vehicle's wading depth is the height of the engine air intake, which is usually located on the upper side of the central part of the grille for most vehicles.
7
5
Share

How many seconds does the Kawasaki Z900 take to reach 100 km/h

The Kawasaki Z900 can accelerate from 0 to 100 km/h in 3.4 seconds. Here are the relevant details: 1. Engine: The Kawasaki Z900 is equipped with a 948cc inline four-cylinder engine, which delivers a maximum power of 118 horsepower and a maximum torque of 95 Nm. 2. Configuration: The Kawasaki Z900 motorcycle features a double-beam rigid frame for durability. The suspension system utilizes 41mm inverted front forks with rebound damping and adjustable spring preload, while the rear suspension employs a center-mounted monoshock with similar adjustability. The braking system consists of 300mm dual discs with four-piston Nissin calipers at the front and a 250mm single disc with a sliding caliper at the rear. Additionally, it is equipped with a dual-channel ABS anti-lock braking system, though it does not include other automated assistive devices.
5
3
Share

Do Brake Discs and Brake Pads Need to Be Replaced Together?

Brake discs and brake pads do not need to be replaced together. The maintenance methods for brake pads and brake discs are as follows: 1. Develop good driving habits. 2. Avoid emergency braking. 3. Regularly check the brake pads and brake discs. 4. Inspect the thickness of the friction lining. 5. Have a professional inspect the brake shoes. 6. Use original equipment manufacturer (OEM) provided brake pads and brake discs for replacement. The decision to replace brake discs depends on their thickness and wear condition. Brake discs are a crucial component of the braking system and are categorized by structure into solid brake discs and ventilated discs. Brake pads, also known as brake linings, are key safety components in a car's braking system, consisting of a steel plate, adhesive heat insulation layer, and friction block.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.