What are the dimensions of the Audi A7?

1 Answers
MollyRose
07/30/25 5:46am
The dimensions of the Audi A7 are 4976mm in length, 1908mm in width, and 1405mm in height. Taking the Audi A7 2021 40TFSI Luxury model as an example, it has a wheelbase of 2928mm, a body structure of a 5-door 4-seat hatchback, a fuel tank capacity of 73 liters, a luggage compartment capacity of 535 liters, and a curb weight of 1895kg. The vehicle is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 320Nm. It is paired with a 7-speed dual-clutch transmission. Both the front and rear suspension types are multi-link independent suspensions, and the drivetrain is front-wheel drive.
Was this review help?
1
5
Share
More Forum Discussions

Does running semi-synthetic oil for 10,000 kilometers affect the car?

Running semi-synthetic oil for 10,000 kilometers does affect the car. The reasons are as follows: 1. Short replacement interval for semi-synthetic oil: Generally, the replacement cycle for semi-synthetic oil is 7,500 kilometers or within 6-8 months. 2. Impact on the car: The oil loses its effectiveness, which can easily cause engine damage and increase wear on various components. Information about semi-synthetic oil is as follows: 1. Semi-synthetic oil: It is one type of automotive oil. Semi-synthetic oil is a lubricant made using semi-synthetic base oil, which is derived from Group III base oils internationally. It is a product purified from mineral oil through hydrocracking technology. 2. Composition: It is a mixture of mineral oil and full synthetic oil in a 4:6 ratio. The purity of semi-synthetic oil is very close to that of full synthetic oil, but its cost is slightly higher than mineral oil. It is an ideal transitional product from mineral oil to synthetic oil.
3
3
Share

Which company produces Jaguar's 8AT?

Jaguar's 8AT transmission belongs to the German brand ZF. Taking the Jaguar XEL as an example, here are the specific details of the Jaguar XEL: 1. Vehicle Positioning: The Jaguar XEL is positioned as a luxury mid-size sedan, with dimensions of 4788mm in length, 1850mm in width, and 1429mm in height, and a wheelbase of 2935mm. 2. Powertrain: The Jaguar XEL is equipped with a 2.0T engine, offering two power options: a low-power version with a maximum output of 200 horsepower and a high-power version with a maximum output of 250 horsepower. In terms of transmission, the new car is fitted with an 8-speed automatic transmission. 3. Features: The Jaguar XEL will be equipped with features such as a panoramic camera, ACC adaptive cruise control, and a dual sunroof.
3
4
Share

Why does the Wuling Rongguang lose power while driving?

If the Wuling Rongguang loses power while driving, the fuel system should be checked, especially the fuel pump. It could be due to poor-quality fuel or a dirty fuel tank. Here is some information about the Wuling Rongguang: 1. Dimensions: The Wuling Rongguang measures 4 meters in length, 1620mm in width, and 1915mm in height. Compared to traditional microvans (under 3.8 meters), it is larger in all dimensions, providing more space for passengers and cargo. 2. Features: The most notable feature of the Wuling Rongguang is its size, which is also the core value of the product. Unlike traditional microvans that are simply elongated, the Wuling Rongguang's "largeness" is comprehensive and well-deserved. 3. Powertrain: The Wuling Rongguang is equipped with a new-generation small-displacement (1.2L) high-power B-series engine, boasting an outstanding power-to-displacement ratio of 52.2KW/L.
1
0
Share

In which year does a vehicle start requiring annual inspections?

For non-commercial private vehicles, within the first ten years, inspections are required every two years for the first six years, and then every two years with on-site inspections for the remaining four years. Passenger vehicles for commercial use require annual inspections, and those over five years old require biannual inspections. Freight vehicles require annual inspections. 1. New vehicle inspection methods: There are two methods. The first method is to handle the inspection through the mobile app "Traffic Management 12123." The second method is to conduct the inspection at the vehicle management office or the traffic management department of the public security authority. It is important to note that vehicles exempt from on-site inspections still require annual inspection procedures; they just do not need to undergo on-site inspection formalities. However, annual inspection procedures must be completed to legally drive the vehicle. 2. Consequences of not undergoing inspections: If a vehicle fails to complete the annual inspection procedures for three consecutive inspection cycles, it will be forcibly scrapped. An inspection cycle is not necessarily one year; it could be two years, one year, or six months, depending on the nature of the vehicle's use.
3
3
Share

What are the subjects for the motorcycle license test?

The following is an introduction to the test items for the motorcycle license: 1. Subject 1: Theoretical knowledge related to motorcycles, 50 questions with 2 points each, test duration of 45 minutes, passing score of 90. 2. Subject 2: Motorcycle skills such as slalom and curve riding. 3. Subject 3: Subject 3 is taken together with Subject 2, and the test content involves driving along a route specified by the examiner. 4. Subject 4: Tests on civilized driving and traffic rules. The following is an introduction to motorcycles: 1. Definition of a motorcycle: A two-wheeled or three-wheeled vehicle powered by a gasoline engine, steered by handlebars, lightweight and agile, capable of rapid movement, widely used for patrol, passenger and cargo transport, and also as sports equipment. 2. Classification of motorcycles: Divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.
12
5
Share

What does wcvt mean?

Gear Direct Drive Transmission (CVT Transmission). The following is an introduction to CVT transmission: 1. Introduction: CVT refers to a type of automotive transmission, also known as a continuously variable transmission. The difference between CVT and stepped transmissions is that its gear ratio is not intermittent points but a series of continuous values, achieving good economy, power, and driving smoothness, while also reducing emissions and costs. 2. Advantages and Disadvantages: Smoothness: Since there are no transmission gears like those in a conventional automatic transmission, there is no gear-shifting process, and the resulting shift shock is eliminated. Therefore, the power output of a CVT transmission is linear, making it very smooth in actual driving. Free Gear Setting: The transmission system of a CVT theoretically allows for an unlimited number of gears, making gear setting more flexible. It is easier to achieve the balance between gear ratio, speed ratio, performance, fuel consumption, and exhaust emissions compared to traditional transmission systems. Good Performance: The mechanical efficiency and fuel economy of CVT transmissions are significantly better than those of conventional automatic transmissions, second only to manual transmissions, with much better fuel economy.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.