What are the dimensions of the Audi A4?

1 Answers
DelAnastasia
07/29/25 8:28pm
Audi A4 has a length, width, and height of 4762mm, 1847mm, and 1436mm respectively, with a wheelbase of 2828mm. The related introduction of Audi A4 is as follows: Audi A4 Exterior Design: Both the Audi A4 Avant and Audi A4 allroad models feature a hexagonal grille design, but there are distinct differences in details. The front face design of the Avant model is the same as the current sedan version of the Audi A4L, with blackened treatment on the grille and fog light areas, making it more dynamic and vibrant. Audi A4 Configuration: The interior design of the new car is very tech-savvy, with the enhanced Audi virtual cockpit as standard across the range. It is equipped with a 12.3-inch full LCD instrument panel, a 10.1-inch central control screen, and the MMI infotainment system, integrating functions such as voice control, touch sound feedback, entertainment, navigation, and car networking. It also supports Audi-Connect connectivity technology.
Was this review help?
16
4
Share
More Forum Discussions

What is the wiper size for the Teana 2.3?

The wiper size for the Teana 2.3 is 26/17 inches. Wiper System: Wipers generally include vacuum wipers, electric wipers, and wipers with electronic control units. The wiper system is an important accessory installed on the windshield, designed to remove rain, snow, and dust that obstruct visibility on the windshield, playing a crucial role in driving safety. Wiper System Working Principle: The motor on an electric wiper drives the output shaft via a worm gear on the armature shaft, and the output gear is driven through an idler gear and idler shaft. The output arm connected to the wiper linkage is then operated by the output shaft. When the motor rotates, the output arm and linkage are driven to move in a back-and-forth motion.
10
2
Share

What is the curb weight of Chery Flagcloud?

Chery Flagcloud has a curb weight of 990KG. General weight of cars: A small car weighs about 1.5 tons, with general family cars ranging between 1.2 to 1.3 tons, mid-to-high-end cars around 1.4 to 1.6 tons, and heavier ones between 1.8 to 2.0 tons. Excessive body weight can lead to higher fuel consumption, poorer handling, slower acceleration, and increased braking distance. Methods to reduce car weight: In terms of materials, using lighter materials such as aluminum alloy and carbon fiber; in design, optimizing structural design to reduce the use of unnecessary materials while ensuring structural rigidity, thereby saving weight and cost.
13
3
Share

How long does it take to replace the taillight at an Audi 4S store?

Replacing the taillight at an Audi 4S store can take as short as about 2 hours or as long as about 6-7 hours. Introduction to taillights: Taillights are lights installed at the rear of a vehicle, typically with a main color of red. From an optical perspective, red light has the longest wavelength in the spectrum, making red objects visible from a great distance. Additionally, due to its strong penetrating power, red light remains highly visible in foggy or rainy conditions. Psychologically, red has a warning effect, creating an alert signal in the human brain and making people more vigilant. Therefore, not only car taillights but also many warning or prohibition signs in daily life are red. Repairing a damaged taillight: First, check the bulb—if it's damaged, it needs to be replaced. Then, inspect the wiring to see if it's due to a short circuit. Finally, check if the fuse is broken; if so, it should be replaced at a repair shop.
2
1
Share

What to Do When Car Brakes Fail?

Here are the solutions for car brake failure: 1. First, turn on the hazard lights to alert other vehicles and be mindful of avoiding other cars, avoiding swerving left and right. 2. Quickly shift to a lower gear, then slowly pull up the handbrake to pull over. Be sure to pull it up slowly. If the handbrake is pulled too quickly, the wheels may lock, which is very dangerous. 3. If the car is on an uphill slope, to prevent it from rolling backward, after stopping, place stones or other objects behind the wheels to prevent the car from rolling back. Also, set up a triangular warning sign to alert vehicles behind. 4. If the car is on a downhill slope and cannot be completely stopped, use other obstacles to bring the car to a halt, such as scraping against a wall. The car's braking system is the driver's greatest safety assurance while driving, so always check the condition of the braking system during every maintenance session. Address any issues promptly to eliminate the risk of brake failure.
19
2
Share

What are the maintenance items for the Baojun 560 at 50,000 kilometers?

If the car has not undergone major maintenance before, then at 50,000 kilometers, it is necessary to replace the spark plugs, engine oil, oil filter, air filter, and cabin air filter. Additionally, it is also required to check the brake pads, inspect the tires, and check whether the throttle valve has carbon buildup, etc. Check the ignition coils: At 50,000 kilometers, the working condition of the ignition coils should be checked. If the ignition coils are not functioning properly, it may lead to a decrease in engine power and an increase in fuel consumption. Replace the spark plugs: When replacing the spark plugs, it is important to note that after removing the spark plugs, the holes where the spark plugs are installed should be blocked to prevent foreign objects from falling into the cylinders. When installing the spark plugs, a torque wrench should be used to tighten them according to the specified torque. If they are tightened too much, the spark plugs may break, and if they are not tightened enough, it may cause air leakage.
8
3
Share

What to Do When Engine Oil Pressure is Too High?

Solutions for excessive engine oil pressure: 1. If a long-used diesel engine shows excessive oil pressure, it indicates that the fine oil filter is clogged and should be cleaned. 2. If the diesel engine has excessive oil pressure at low temperatures, but the oil pressure returns to normal when the engine temperature rises, it means the excessive oil pressure is caused by the diesel engine being too cold. 3. If the oil pressure becomes significantly too high after changing the oil, it indicates that the wrong oil grade was selected. For example, using oil with a higher viscosity in winter can cause excessive oil pressure. Replacing it with oil suitable for the season is necessary. 4. If the oil viscosity is too high, it indicates greater internal friction resistance during oil flow. Oil viscosity is related to engine temperature—when the engine temperature is low, the oil viscosity is high. 5. When the engine temperature is high, the oil viscosity decreases. High oil viscosity results in poor fluidity but better sealing and less leakage. If the oil viscosity exceeds the specified value, the flow resistance in the lubrication system will increase, leading to higher pressure.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.