···
Log in / Register

What are the dimensions of the 2022 Mitsubishi Outlander?

4 Answers
ConnorMarie
07/29/25 5:02pm
2022 Mitsubishi Outlander has a body size of 4680mm in length, 1860mm in width, and 1747mm in height, according to official data. The length of the 2022 Mitsubishi Outlander refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The 2022 Mitsubishi Outlander is equipped with a 2.5-liter naturally aspirated four-cylinder engine, delivering a maximum power of 184 horsepower and a peak torque of 245 Nm, with a 0-100 km/h acceleration time of 8.6 seconds. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking to prevent accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
Was this review help?
17
4
Share
CadenRose
08/14/25 7:14am
I often drive the 2022 Mitsubishi Outlander with my family. The vehicle has a substantial size, with a length of approximately 4705 mm (about 4.7 meters), a width of around 1810 mm (1.81 meters), and a height of about 1710 mm (1.71 meters). This size is ideal for a family of five, offering particularly spacious rear seating with ample legroom and nearly 1000 mm of headroom. The trunk capacity is 913 liters, providing more than enough space for luggage and camping gear. While it feels a bit large in the city, the parking cameras and radar are a great help. On the highway, it handles very steadily. In terms of fuel consumption, it averages around 8 liters, which is not too high. The elevated body offers excellent visibility and strong off-road capability. I recommend taking a test drive to experience the comfort and practicality that comes with its size.
Was this review help?
2
3
Share
Expand All
CoreyFitz
10/13/25 4:41am
As a car enthusiast, I personally tested the 2022 Outlander and remember its size details clearly: the car is 4705mm long, 1810mm wide, and 1710mm tall, with a wheelbase of 2670mm. The proportions are well-balanced, with the height providing good driving visibility and optimized legroom inside, with rear headroom around 950mm. The size is slightly more compact than its peers, making daily driving not cumbersome, and the turning radius is reasonable; the standard trunk capacity is 913 liters, which can expand to 1600 liters with the rear seats folded, making it practical for cargo or large luggage. In comparison, fuel consumption remains around 8.5 liters, with low wind resistance and noise. In terms of handling, the steering responds quickly, and it doesn't feel unstable at high speeds; the downside is that finding parking spots in the city can be a bit challenging. Considering practicality, these data prove it's suitable for both family and work use.
Was this review help?
8
1
Share
Expand All
BrielleLynn
11/26/25 5:41am
I commute in a 2022 Outlander, measuring 4.7 meters in length, 1.81 meters in width, and 1.71 meters in height, which is quite handy for daily work. In city traffic, the body doesn't feel bulky, and the 2670mm wheelbase makes turning flexible; the interior space is compact but not cramped, with comfortable head and legroom in the front seats. The 913-liter trunk is just right for fitting a gym bag or shopping items. Equipped with a rearview camera, parking in regular spots isn't difficult; the height of 1710mm avoids scraping the roof in underground garages. Fuel consumption is well-controlled, around 8 liters in mixed driving conditions; the open view provides a strong sense of security. The overall size design leans towards practicality, and you get used to it after driving for a while.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

How many models does the Yamaha YBR150 have?

There are two models of the Yamaha YBR150, one with disc brakes and one with drum brakes. Here is some information about the Yamaha YBR150: Appearance: The overall appearance may not be the most stylish, but the sharp lines and unique color schemes are not unattractive, making it an enduring design. Both front and rear lights, as well as turn signals, use conventional bulbs, but the brightness is sufficient. The taillight also features a popular split design. Configuration: The dashboard uses a traditional mechanical style and includes a gear indicator. The front brake is a single-piston disc brake, while the rear brake is a traditional drum brake. The internal wiring and craftsmanship are also meticulous, maintaining Yamaha's consistent production standards.
6
4
Share

What is the fuel consumption of Yamaha Xunying?

Xunying's actual fuel consumption per 100 kilometers is not less than 3 liters. If the average comprehensive fuel consumption is 3.65 liters per 100 kilometers, it is considered basically normal or slightly higher. Here is some introduction about Xunying: Appearance: The front lighting layout is divided into two parts, with the upper part being the turn signals and the lower part being the high/low beam lights and position lights. The clear and easy-to-read analog instrument panel is nothing special among scooters produced and sold in recent years. Braking: The single-piston brake caliper provides excellent actual braking force. The front storage compartment is reasonably designed, allowing for easy placement of small items. The scooter comes with an anti-theft keyhole, which is a common configuration for current scooters.
6
1
Share

How to Align the Reference Points for Parallel Parking in Driving Test Part 3?

Here are the step-by-step methods for aligning reference points during parallel parking in Driving Test Part 3: 1. Observe the front one-third of the car hood: Divide the hood into three equal sections. When the right one-third point aligns with the curb line during parking, the right wheels will be precisely 30cm from the curb. 2. Use the hood reinforcement rib as reference: Keep the right reinforcement rib aligned with the curb while moving forward to maintain the 30cm distance. 3. Utilize the windshield wiper notch: When the wiper's notch coincides with the curb line during forward motion, the vehicle maintains exactly 30cm from the curb. Detailed techniques for gear shifting in Driving Test Part 3: 1. Listen: When gear and speed mismatch occurs, obvious vehicle vibration and engine "knocking" sounds indicate shifting is required. 2. Watch: For students with poor vehicle sensitivity who can't perceive vibration intensity or determine shifting timing by sound, observe dashboard gauges for assistance. 3. Three Don'ts: Never look down at the gearshift, avoid skip-shifting, and prevent steering deviation.
11
5
Share

What does AEB mean?

AEB stands for Autonomous-Emergency-Braking, which is translated as automatic braking system in Chinese. It is an active safety technology for vehicles that can automatically monitor the distance and relative speed of objects ahead. When the driver brakes too late, with insufficient braking force, or fails to brake, the vehicle will issue a warning or apply the brakes automatically. Here is additional information: 1. Main functions of AEB: It includes three major parts: Pre-Collision Warning (PCW), Emergency Braking (EB), and Pedestrian Protection (PP). 2. Monitoring via radar and camera: The system uses radar and cameras to monitor the situation of vehicles and pedestrians ahead. If a potential collision risk is detected, the system will take corresponding warning and braking measures to avoid a collision or reduce the severity of the collision.
16
4
Share

What Color of Car Engine Oil Indicates It Needs to Be Changed?

Typically, the viscosity of the engine oil is used to determine whether it needs to be changed, rather than observing the color of the oil. Methods to determine if engine oil needs to be changed: Take a drop of oil and place it on a test paper. Observe the spread of the oil. If the edges of the spread are not clear, it means the oil can still be used. If a ring appears, it indicates the oil is still acceptable. If the ring is very distinct and the spread is minimal, it means the oil needs to be changed. Grade 1: There is no clear boundary between the deposit zone and the diffusion zone of the oil spot. The entire oil spot is uniform in color, and the oil ring is light and bright, indicating good oil quality. Grade 2: The deposit ring is dark in color, the diffusion ring is wide, and there is a clear boundary. The oil ring is yellow in varying shades, indicating the oil is contaminated but still usable. Grade 3: The deposit ring is dark black, deposits are dense, the diffusion ring is narrow, and the oil ring has darkened, indicating the oil has deteriorated. Grade 4: Only the central deposit ring and oil ring are present, with no diffusion ring. The deposit ring is pitch black, with dense and thick deposits that are difficult to dry. The oil ring is dark yellow or light brown, indicating the oil has oxidized and degraded. Method for changing engine oil: When adding engine oil, ensure the oil level is between the min and max marks on the dipstick. The oil level should not be below the min mark or above the max mark. If the oil level is below the min mark, it can lead to insufficient lubrication in the engine, increasing wear and tear. If the oil level is above the max mark, it can increase resistance during engine operation, leading to reduced power and increased fuel consumption. Always check the oil level carefully when adding oil.
9
2
Share

What causes the Yamaha Xunying 125 to lack acceleration?

Reasons for the Yamaha Xunying 125 lacking acceleration: fuel system malfunction, decreased engine compression ratio. Detailed explanations of the causes are as follows: Fuel system malfunction: Excessive fuel leads to an overly rich air-fuel mixture, causing the motorcycle to lack acceleration at low speeds. An overly rich mixture lacks sufficient oxygen during combustion, resulting in incomplete combustion. This reduces power output, worsens fuel efficiency, and easily leads to excessive carbon buildup, which can block the exhaust system and exacerbate the lack of acceleration. Decreased engine compression ratio: Engine power is directly linked to the compression ratio. With prolonged use, internal engine components wear out. If key components become excessively worn, the engine's compression ratio will decrease.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.