···
Log in / Register

What are the dimensions of the 2019 Audi A4?

3 Answers
LeDylan
07/29/25 4:01pm
Audi A4's dimensions are 4762mm in length, 1847mm in width, and 1436mm in height, with a wheelbase of 2828mm. The related introduction of Audi A4 is as follows: Audi A4 Exterior Design: Both the Audi A4 Avant and Audi A4 allroad models feature a hexagonal grille design, but there are distinct differences in details. The front face of the Avant model is the same as the current sedan version of the Audi A4L, with blackened treatment on the grille and fog light areas, making it more dynamic and sporty. Audi A4 Configuration: The interior design of the new car is very technological, featuring a standard enhanced Audi virtual cockpit, equipped with a 12.3-inch full LCD instrument panel and a 10.1-inch central control screen. It also comes with the MMI infotainment system, integrating functions such as voice control, touch sound feedback, entertainment, navigation, and car networking. Additionally, it supports Audi Connect technology.
Was this review help?
13
5
Share
DiDaisy
08/15/25 4:10am
I remember the standard dimensions of the 2019 Audi A4 were 4,762 mm in length, 1,847 mm in width, and 1,436 mm in height. As a mid-size luxury sedan, these dimensions are just perfect—the combination of body length and width makes the interior space particularly spacious, with ample legroom in the rear seats, especially the width allowing three people to sit comfortably. I’ve driven it on the highway, where its low center of gravity ensures great stability and low wind resistance. In the city, the length isn’t excessive, making it easy to fit into many parking spaces, and the small turning radius adds to its agility. Overall, the size design is both practical and stylish. Compared to the BMW 3 Series, it’s a bit shorter but offers better interior space utilization, making it ideal for daily commutes and family trips. No wonder I’ve always appreciated Audi’s well-balanced tuning.
Was this review help?
3
1
Share
Expand All
McHannah
10/12/25 5:18am
The 2019 Audi A4 measures 4762mm in length, 1847mm in width, and 1436mm in height. From my perspective, this is a very smart size choice that gives it an advantage among luxury vehicles in its class. For instance, it's about 40mm wider than the Mercedes-Benz C-Class, offering more lateral cabin space for carrying items; yet with a slightly lower height, it provides more stable handling and less floatiness at high speeds. These dimensions have multiple impacts – the deeper trunk makes loading luggage easier, and fuel consumption remains reasonable due to optimized aerodynamics. Having analyzed the data, I find it maintains an overall balance, avoiding the parking difficulties of larger vehicles while incorporating Audi's user-friendly design that makes it approachable even for novice drivers. Of course, if you're seriously considering purchasing, you should visit a dealership to experience the cabin firsthand. While dimensions aren't the sole deciding factor, they're certainly an important aspect not to overlook when selecting a vehicle.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the difference between manual central locking and remote central locking?

The differences between manual central locking and remote central locking can be categorized into different operation methods, varying levels of operational difficulty, and different safety factors. Differences in operation methods and difficulty levels: Manual central locking in cars requires manual operation, while remote central locking uses a remote control. In fact, whether it's manual locking or automatic locking, the purpose is to ensure the safety of people and property. However, manual locking, although relatively more cumbersome, tends to be slightly more effective than automatic locking. Of course, you can't expect the doors to lock automatically just by closing them, as the driver might be seated while passengers may not have boarded yet. Different safety factors: The condition for automatic locking while driving is that it only engages after reaching a certain speed. When the vehicle is stationary, automatic locking does not occur. This means that while the vehicle is stationary, although there is no risk of accidental door opening leading to falls, there is a danger of theft. Therefore, it's common practice to develop the habit of manual locking.
14
4
Share

Can Four-Wheel Drive Cars Drift?

Four-wheel drive cars can drift. Introduction to Drifting: Drifting is a driving technique, also known as "tail sliding." The driver causes the car to slide sideways through excessive steering. This is usually compared to grip turning. Drifting is mainly used in performances or racing events with significant changes in road conditions. Due to the frictional characteristics of the road surface, drifting is more frequently applied in off-road rally races. However, other types of racing rarely use drifting techniques for turning because drifting on regular asphalt roads causes significant speed loss and increased tire wear. Unless for special reasons, drivers do not frequently use this technique during competitions. Drifting Techniques: Pull the handbrake while driving straight and then turn the steering wheel; pull the handbrake during a turn; slam the brakes while driving straight and then turn the steering wheel; slam the brakes during a turn; for rear-wheel drive cars with sufficient power, slam the accelerator and turn the steering wheel when the speed is not too high.
2
5
Share

Where is the left fender located on a car?

The left fender is located above the left tire on the left side of the vehicle. It serves as the outer panel on the side of the vehicle and is formed from resin. The fender is integrally formed with both the outer panel section and the reinforcement section using resin. Concept of the fender: The fender (also known as a wing panel) is categorized into front fenders and rear fenders based on its installation position. It refers to a type of cover component used on motor vehicles and non-motor vehicles. Function of the fender: According to fluid dynamics, it reduces the drag coefficient, making the car drive more smoothly. The front fender prevents sand, gravel, and mud splashed up by the wheels during driving from reaching the bottom of the cabin, thereby reducing damage and corrosion to the chassis.
14
5
Share

Do New Energy Vehicles Have Auto Start-Stop?

New energy vehicles do not have auto start-stop. Engine Auto Start-Stop: A system that automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when movement is required. Engine start-stop technology allows the new energy vehicle's engine to automatically shut off during situations like waiting at traffic lights or encountering traffic jams, reducing unnecessary fuel consumption, lowering emissions, and improving fuel economy. Disadvantages of Auto Start-Stop Function: Frequent engine starts and stops can cause damage to related components such as the starter and battery. Their failure rates are higher than those in conventional vehicles without auto start-stop systems. Additionally, the maintenance costs for enhanced starters and batteries are also higher than those for standard ones.
6
3
Share

Why Does Rain Flow Backwards While Driving?

Rain flows backwards while driving because the vehicle speed is too high. The principle of rain flowing backwards: Ignoring the actual wind speed (i.e., natural wind in static conditions), a vehicle speed of over 160 km/h is required. The 'subjective' wind speed caused by the vehicle's motion can overcome the gravitational potential energy of the raindrops on the windshield, causing them to flow upwards. Precautions for driving in the rain: Control your speed. Roads are slippery in the rain, and visibility is reduced, so it's essential to control your speed and maintain a safe following distance. Don’t take familiar routes for granted. Drive cautiously and avoid driving through deep water. Observe other vehicles first; if the water level reaches nearly half of the tire height, do not attempt to force your way through.
17
4
Share

Can a tire still be used if a piece is torn off the sidewall?

It is not recommended to use. The rubber on the sidewall of the tire is very thin and can easily burst from the damaged area. Moreover, it cannot be repaired because repairing requires grinding away part of the rubber, making it even thinner. Generally, repair shops do not repair tire sidewalls and recommend replacement instead, as safety comes first. Cases where tires cannot be repaired: Sidewall damage cannot be repaired. A puncture hole in the tread with a diameter exceeding 6mm cannot be repaired. Other irreparable damages include bead damage or deformation, tread deformation, rubber corroded by chemicals, or damage caused by driving on a flat tire. Note on tire lifespan: Tires naturally wear out, so normal tires will have wear limits marked on the sidewall before leaving the factory to indicate the real-time wear condition of the tire. Regular checks on tire wear should be conducted during daily use to prevent severe wear that could affect performance.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.