···
Log in / Register

What are the dimensions of Jetour?

4 Answers
MacAngelina
07/29/25 12:31pm

The dimensions of Jetour are 4720mm in length, 1900mm in width, and 1695mm in height. Background introduction of Jetour: As a new product line under Chery Holdings, Jetour focuses more on travel, with the product development philosophy of high aesthetics, spaciousness, intelligence, and quality. Brand culture: To create stylish and practical cars for today's young people, and to define journeys with them through actions. Vehicle introduction: Jetour has successively launched models such as the Jetour X70, Jetour X70S, Jetour X90, Jetour X70SEV, and Jetour X95. In 2020, Jetour introduced several new and facelifted models, including the Jetour X70M and Jetour X70Coupe.

Was this review help?
12
1
Share
Lucas
08/13/25 11:57pm

The dimensions of Jetour depend on the specific model. For popular models like the X70 PLUS, the length is generally around 4.75 meters, the width is about 1.9 meters, and the height is approximately 1.72 meters. Different configuration versions may vary by a few centimeters. For daily use, this size isn't too difficult for parking in the city—side parking spaces are usually easy to fit into. A longer wheelbase can make the rear seats more comfortable without legroom issues. However, if you plan to carry large items like strollers or luggage for family trips, pay attention to the trunk depth, as the height affects how easily you can load and unload items. When choosing a car, it's best to actually sit in it to test the space, as just looking at the data can sometimes overlook details like blind spots and visibility.

Was this review help?
13
5
Share
Expand All
EleanorAnn
10/09/25 4:14am

Last year, I helped a friend pick a Jetour vehicle and specifically checked the dimension data. Take the X90 PRO for example: it's nearly 4.86 meters in length, over 1.92 meters in width, and about 1.78 meters in height. The long wheelbase translates to genuinely spacious rear seating. The differences between models are quite noticeable—the X70 PRO is shorter and more agile, while the X90 series offers ample headroom for taller passengers. During the test drive, the benefits of the vehicle's width were immediately apparent, providing greater stability during high-speed cornering, though extra caution is needed with the side mirrors in narrow alleys. When buying a car, don’t just focus on the specs; consider your daily routes. For instance, if you frequently drive on mountain roads, opt for a model with higher ground clearance for better off-road capability and reduced risk of underbody scrapes.

Was this review help?
17
3
Share
Expand All
LaJohn
11/22/25 5:29am

The specific length, width, and height of Jetour vary by model. For example, the X70 is approximately 4.75 meters long, 1.9 meters wide, and 1.72 meters tall, while the X90 is longer and wider. These dimensions have a significant impact in practical use. A lower height can make the sunroof feel oppressive, and insufficient width can make side-by-side seating feel cramped. Parking can be challenging if the vehicle is too long, so opting for a version with a panoramic camera is recommended for convenience. During maintenance, workers often remind you to pay attention to the wheel arch clearance, as it affects the chassis protection capability.

Was this review help?
2
4
Share
Expand All
More Forum Discussions

What is the Difference Between Comfort Mode and Economy Mode?

The differences between Comfort Mode and Economy Mode mainly lie in the following aspects: 1. Mode Characteristics: Economy Mode offers good balance in all aspects; Comfort Mode is the most fuel-efficient and comfortable. 2. Steering Wheel Responsiveness: In Economy Mode, the steering wheel becomes slightly heavier and less flexible. In Comfort Mode, the steering wheel is more responsive, allowing for one-handed driving. 3. Power Delivery: In Economy Mode, the throttle response is noticeably more sensitive, providing immediate power that is neither too gentle nor too aggressive, making it easier to control. When the throttle is fully engaged, a slight sense of acceleration can be felt. In Comfort Mode, the throttle response is less sensitive, and the power delivery is more gradual. Even when the throttle is deeply pressed in this mode, the sense of acceleration is barely noticeable.
12
5
Share

How to Solve the Power Steering Failure of Buick Verano?

If the power steering system of the Buick Verano fails, the only thing the owner can do is to send the car to a repair shop or 4S store, and then let professionals check and repair the fault. The following is the relevant introduction about Buick Verano: 1. Introduction to Buick Verano: Buick Verano is an intermediate sports sedan under SAIC-GM Buick. As a new generation of global strategic models of Buick, Verano integrates General Motors' global advantages, combining stylish and dynamic appearance, exquisite and comfortable driving space with precise and agile sports performance, bringing a new driving experience for the new generation of elites. 2. Design of Buick Verano: Buick Verano is built based on Buick's latest family design language, equipped with a flying-wing chrome-plated grille, wing-shaped LED automatic induction headlights, wing-shaped LED taillights, 17-inch ten-spoke two-tone aluminum alloy sports wheels, fastback roof, etc.
7
2
Share

Where is the OBD interface located on the Ford Mondeo Zhisheng?

Ford Mondeo Zhisheng's OBD interface is located under the driver's seat. There is a storage compartment that can be pulled open to reveal the diagnostic connector inside. The functions of OBD are as follows: 1. The OBD system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it will immediately issue a warning; 2. When a system failure occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault codes can be read from the PCM through a specific procedure; 3. Based on the fault code prompts, maintenance personnel can quickly and accurately determine the nature and location of the fault. OBD monitors the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, and other systems and components in real-time.
3
3
Share

What Causes the Clicking Sound When Turning the Steering Wheel While Stationary in a New Car?

Reasons for abnormal sounds when turning the steering wheel while stationary in a new car are as follows: Steering wheel not properly broken in: Abnormal sounds may occur when turning the steering wheel while stationary, which is a normal phenomenon. The noise will disappear after some use, so there is no need to worry in this case. Issues with the shock absorber: If the plane bearing of the shock absorber lacks lubrication, applying some grease can solve the problem. If the noise persists after greasing, replacement is necessary. Lack of lubrication in the steering column: The sound may come from the steering column dust cover, whether driving or turning the steering wheel while stationary, with the noise emanating from below the steering wheel. Simply inspect the steering column dust cover. Applying some grease will resolve this issue.
7
1
Share

How often should the Verna's brake pads be replaced?

The Verna's brake pads should be replaced every 60,000 to 70,000 kilometers. The method for replacing the brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during the replacement process; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install the new brake pads, tighten the guide bolts, and complete the replacement. Taking the 2020 Verna as an example, it belongs to the compact car category, with body dimensions of: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, and a fuel tank capacity of 43 liters. The 2020 Verna is equipped with a 1.4L naturally aspirated engine, with a maximum horsepower of 95PS, a maximum power of 70kW, a maximum torque of 132.4Nm, and is paired with a 5-speed manual transmission.
16
4
Share

Why can't a fully paid vehicle with the original title be transferred?

A fully paid vehicle with the original title, even if it is a legitimate car with normal procedures, still has drawbacks. Since such a car comes with a full payment clearance certificate and the original title, it is generally a released mortgage vehicle, meaning it was transferred as collateral for the original debt. Such vehicles are not under the owner's name, and purchasing them carries the risk of being seized. When purchasing, it is important to pay attention to the source and whether the vehicle has been tampered with. Below is additional information: 1. Source of the mortgage vehicle: When purchasing a mortgage vehicle, you need to know the source of the car. If you buy an illegal mortgage vehicle, it is against the law and carries significant legal responsibilities. 2. Engine inspection: When purchasing a mortgage vehicle, always check if the engine has been tampered with. It is best to have a professional auto repair technician accompany you to inspect the car.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.