What are the dimensions of an accessible parking space?

2 Answers
AshlynLee
09/09/25 2:20am
The dimensions of an accessible parking space are generally 2.8 meters by 6 meters. Standard parking space dimensions: Parking spaces can be categorized by size and arrangement. Parking spaces are divided into two types by size: Large parking spaces are 15.6 meters long and 3.25 meters wide, suitable for medium and large vehicles; Small parking spaces are 6 meters long and 2.5 meters wide, suitable for small vehicles. Standard parking space: 5.3 meters long and 2.4 meters wide. Suitable for mid-to-high-end extended vehicles. Compact parking space: 4.0 meters long and 2.2 meters wide. Suitable for hatchbacks or compact sedans. Parking spaces are divided into three types by arrangement: Parallel parking space: The standard length is 6 meters, and the width is 2.5 meters. Angled parking space (30-degree, 45-degree, or 60-degree angle): The diagonal length is 6 meters, the width is 2.8 meters, and the perpendicular distance between the two diagonal lines should be maintained at the standard of 2.5 meters. Perpendicular parking space: The length is greater than or equal to 5 meters, usually set at 6 meters, and the width is 2.5 meters. Generally, 2.5x5.3 meters is the optimal standard parking space size. Large vehicle parking spaces should not use angled or perpendicular arrangements.
Was this review help?
15
5
Share
DiAniyah
09/20/25 7:17am
I often drive and have noticed that accessible parking spaces are much wider than regular ones, typically around 2.4 meters, sometimes reaching 3 meters, with a length of about 5 to 6 meters. The most crucial aspect is having an adjacent access aisle, at least 1.2 meters wide, with a gentle slope not exceeding 15 degrees, to facilitate wheelchair users getting in and out of vehicles. Many people are unfamiliar with the rules and park haphazardly, causing inconvenience to those who genuinely need these spaces. These spots are usually located near entrances for quick access. Thoughtful design benefits everyone's safety and reflects societal warmth. I remind myself to park away from these spaces, leaving them for those in need.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What are the methods to deal with excessive carbon monoxide in car exhaust?

Clean the three-way catalytic converter. Once this component is clogged or too dirty, it will lose its ability to convert carbon monoxide. Check the dashboard for any engine warning lights. If the air-fuel ratio of the engine cannot stabilize, incomplete combustion may occur.
8
1
Share

What to Do When the Battery is Undercharged and Won't Charge?

Check if the fuse has poor contact and reconnect it. Replace the wiring. If the battery has been used for a long time, the electrolyte may decrease, and it needs to be refilled. Replace the battery.
1
3
Share

How to Shift to Neutral in an Automatic Transmission Without Starting the Engine?

Turn on the power without starting the engine. Press the brake pedal and shift the gear. First shift to N (Neutral) gear, then start the engine, and then shift to D (Drive) gear. Release the parking brake. Lift your foot off the brake pedal and start driving.
17
0
Share

What is the simplest way to reset a car's ECU?

Drive for a while to allow the car to reach normal operating temperature, then park and turn off the engine, shutting down all electrical devices in the car. Open the car's hood, locate the battery, and disconnect the battery's power cables. Wait for 10 minutes before reconnecting, then turn on the power without starting the engine and activate the car's electrical devices, waiting for 30 seconds. Remove the key, and the reset is successful.
12
5
Share

What are the starting and parking procedures for the Volvo XC40?

Make preparations before starting the car. Press the start button to start the engine while holding down the foot brake. Shift the gear to D (Drive), gently release the foot brake to move forward, and press the accelerator pedal if acceleration is needed. Press the foot brake to stop the car. Shift to P (Park) and turn off the engine.
5
3
Share

What is the voltage of the ABS sensor connector?

The voltage of the ABS sensor connector is 5V to 8V, with an output voltage of 650mV to 850mV. During actual measurement, due to the fault protection function of the electronic stability control module, the voltage cannot be sustained after unplugging the ABS sensor connector, so voltage data cannot be used as a judgment criterion. The ABS sensor is an important component of the ABS system. ABS can maintain the directional stability of the vehicle during braking while driving, shorten the braking time and distance, and effectively prevent wheel lock-up and uncontrolled skidding during emergency braking, thereby enhancing the vehicle's controllability and making driving safer.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.