···
Log in / Register

What are the dimensions of a Land Rover?

4 Answers
PaulLee
07/23/25 7:30pm
Taking the Land Rover Evoque as an example. The dimensions of the Land Rover Evoque are 4355mm in length, 1965mm in width, and 1605mm in height. Below is a detailed introduction about the Evoque: Overview: The Range Rover Evoque is the most compact SUV model in the Land Rover brand. As the production version of the Land Rover LRX concept car, it is positioned slightly above the Freelander series. Others: The Land Rover Range Rover Evoque officially entered the Chinese market in the second half of 2011, available in three-door and five-door versions, with the main difference being the inclusion of a panoramic sunroof. The wheel design is one of the distinctive features of the Range Rover Evoque, with a unique and stylish petal-like pattern.
Was this review help?
9
4
Share
Graham
08/10/25 3:06pm
I'm quite familiar with Land Rover dimensions. The differences between models are significant: the standard Range Rover is about 5 meters long, nearly 2.1 meters wide, and over 1.8 meters tall, offering exceptional spaciousness. While it can be challenging to park in urban areas, its interior space is massive, easily accommodating luggage for 7 people. The smaller Defender 110 measures 4.6 meters in length, 2 meters in width, and 1.9 meters in height, with excellent off-road clearance - its 22cm ground clearance makes avoiding rocks effortless. The Discovery has similar dimensions at 4.9 meters long and weighs around 2.5 tons, where its size affects fuel efficiency due to wind resistance at high speeds. I often advise friends to choose based on usage: for urban driving, the shorter wheelbase Defender is more compact and easier to park; for suburban or travel purposes, larger SUVs provide ample space but require attention to garage height restrictions. Size impacts safety - larger bodies offer better crash protection but require careful handling due to wider turning radii.
Was this review help?
11
4
Share
Expand All
AnaDella
09/23/25 2:16am
As someone who frequently drives in the city, I've noticed that Land Rover vehicles are generally quite large. My Range Rover Sport, for example, is about 4.8 meters long and over 2 meters wide, making it a tight fit in standard parking spaces. I often have to look for more spacious spots to avoid door dings. With a height of around 1.85 meters, I frequently have to check clearance signs when entering underground garages. On the plus side, the interior is comfortable, with ample rear legroom and plenty of space for luggage on family trips. The more compact Evoque is smaller at 4.4 meters long, making it more maneuverable in urban areas, but its smaller size does compromise some off-road capability. Weighing nearly 2 tons, it's also less fuel-efficient. I think the size design prioritizes practicality—taller vehicles offer better visibility but aren't ideal for narrow lanes in older neighborhoods. Before buying, I always measure the actual dimensions to avoid daily hassles.
Was this review help?
12
2
Share
Expand All
VanDavid
11/06/25 4:32am
Land Rover vehicles come in various sizes. The Defender 90 with a short wheelbase is only 4.3 meters long, 1.8 meters wide, and 1.9 meters tall, making it easy to navigate through forests when off-roading. Larger SUVs like the Range Rover can be extended to 5.2 meters in length and nearly 1.9 meters in height, offering spacious seating for up to 8 people, but they feel cumbersome when turning. Having driven several models, the size significantly impacts maneuverability: high ground clearance prevents issues on rough terrain, but requires caution in urban areas to avoid scraping the undercarriage. For models over 2 meters wide, be mindful not to hit walls when opening doors. The generous interior volume includes a 550-liter trunk, perfect for luggage and camping gear. Overall, the dimensions strike a balance between space and mobility.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Does mismatched speed and gear in Subject 3 result in point deduction or failure?

Mismatched speed and gear in Subject 3 will result in point deduction. The reason for speed-gear mismatch is that the clutch pedal isn't fully depressed during gear shifting. When shifting to a higher gear, the increased speed isn't detected by the system as a gear change signal, causing it to assume the vehicle remains in the lower gear, which naturally leads to point deduction due to speed mismatch. The key challenges in Subject 3 examination are as follows: 1. Speed-gear mismatch: Errors involving high gear at low speed or low gear at high speed must be avoided during the test. Before shifting gears, ensure the speed is adjusted to match the target gear. 2. Deviation in straight-line driving: Many candidates deliberately reduce speed due to concerns about maintaining a straight path, which is inadvisable. This actually increases the likelihood of trajectory deviation, so maintaining appropriate constant speed is crucial. 3. Parking over 30cm from curb: Subject 3 explicitly requires parking within 30cm of the curb, but this distance proves difficult for many candidates who often park too far from the roadside.
16
5
Share

What are the reasons for the squeaking noise in Volkswagen Polo's brakes?

There are several reasons for the squeaking noise in Volkswagen Polo's brakes: 1. ABS braking system producing noise: If the vehicle is equipped with an ABS braking system, the noise may originate from this system. This is because the ABS system activates under poor road conditions, making such noises normal in such scenarios. 2. Foreign objects in the braking system: It is advisable to check at a repair shop for any foreign objects that may have entered the braking system, as these can cause noise. 3. Abnormal operation of the brake caliper: The brake caliper pushes the brake pad to create friction against the brake drum for normal braking. The brake caliper is crucial to the braking system, and keeping it clean during daily driving is essential. If not cleaned regularly, accumulated debris can lead to various noises. 4. Excessive wear of brake pads: Brake pads are consumables. Under normal driving conditions, it's recommended to inspect the brake pads every 5,000 kilometers. Whether replacement is needed depends on the specific situation. Excessive wear of brake pads naturally results in noise.
7
3
Share

Must the front wheels cross the line when reversing into the left parking space?

When reversing into the left parking space, the front wheels must cross the line. Below are some key points to note for the Subject 2 driving test: 1. Reversing into the parking space: (1) Ensure you accurately observe the reference points and lines, and use the rearview mirror to monitor the distance between the car body and the line to avoid the car body crossing the line. (2) Do not stop the car before it is completely inside the parking space. Pay attention to the clutch to avoid stopping midway or not fully entering the parking space. After entering the designated area, park the car at the specified position, then proceed to reverse into the parking space. Exit in the opposite direction and reverse into the parking space again. Finally, exit towards the exit direction to complete the test. 2. Parallel parking: (1) When aligning with the parking space, be mindful of the distance between the car body and the space to avoid crossing the line. Also, be careful not to run over the corner of the parking space when exiting. (2) Remember to turn on the turn signal when exiting. After entering the designated area, align the car parallel to the parking space, drive to the front left of the parking space, and then proceed from the rear right.
3
1
Share

Where to Obtain the Vehicle and Vessel Tax Payment Certificate?

Vehicle and vessel tax generally does not issue invoices; the payment certificate for vehicle and vessel tax is the compulsory traffic insurance policy. The standards for vehicle and vessel tax have changed as follows: 1. Adjustment of tax payment time and location: The "Vehicle and Vessel Tax Law" changes the tax liability occurrence time from "the month recorded on the vehicle or vessel registration certificate or operation certificate issued by the vehicle or vessel management department" to "the month when ownership or management rights of the vehicle or vessel are obtained"; the tax payment location is changed from "designated by the provincial government" to "the registration location of the vehicle or vessel or the location of the withholding agent." 2. Improvement of tax incentives: In addition to retaining the original "Vehicle and Vessel Tax Provisional Regulations" that allow provincial, autonomous region, and municipal governments to provide periodic tax reductions or exemptions for public transport vehicles and vessels, new tax incentives for energy-saving and new energy vehicles and vessels have been added. 3. Optimization of the tax burden structure: First, the tax burden for large-displacement passenger vehicles has been increased, with higher taxes for larger displacements; second, trailers are calculated at 50% of the tax amount for trucks of the same curb weight; third, the tax burden for yachts has been significantly increased.
2
4
Share

Can the green book in the car be replaced if lost?

The green book in the car can be replaced if lost. Relevant information about the motor vehicle green book is as follows: 1. Definition: The car green book refers to the vehicle registration certificate. The vehicle registration certificate is a necessary property ownership document for the vehicle, issued by the vehicle management department of the public security bureau after completing the motor vehicle registration. It is kept by the vehicle owner and not carried with the vehicle. It is required to be presented when handling any vehicle registration procedures such as transfer or change of ownership, and records the relevant information of the vehicle, equivalent to the vehicle's household registration. 2. Notes: If the motor vehicle registration certificate is lost, missing, or damaged, it can be replaced. The vehicle must also be inspected. The vehicle management office should confirm the motor vehicle, review the submitted proofs and documents, and reissue or replace the motor vehicle registration certificate within one day from the date of acceptance. For motor vehicles registered before the implementation of the motor vehicle registration certificate that have not applied for it, the owner can apply for the motor vehicle registration certificate at the local vehicle management office. However, if the owner applies for changes, transfers, or mortgage registration, the motor vehicle registration certificate must be applied for at the vehicle management office before the application.
2
4
Share

What are the signs of a faulty clutch fork?

The manifestations of a faulty fork include bending and deformation of the fork; cracks or fractures in the fork; damage to the fork pin, or detachment of the fork from the fork shaft. A damaged fork can lead to difficulty in shifting gears or the inability to engage gears, necessitating timely inspection and replacement. Otherwise, it may affect the normal driving of the vehicle. Generally, the damage to the fork involves the enlargement of the groove at the upper end of the fork head, thinning or grooving of the contact surface at the lower end of the fork, and bending or twisting of the fork body at the lower part. Below is additional information about the clutch: 1. Clutch: The clutch is the assembly in the vehicle's transmission system that directly connects to the engine. Typically, the clutch is installed together with the engine crankshaft's flywheel group and serves as the component that cuts off and transmits power between the engine and the vehicle's transmission system. From starting the vehicle to normal driving, the driver can operate the clutch as needed to temporarily separate or gradually engage the engine and the transmission system. 2. Function of the clutch: Its role is to allow gradual engagement between the engine and the transmission, ensuring smooth vehicle starts; temporarily disconnecting the engine from the transmission to facilitate gear shifting and reduce impact during shifts; and acting as a separator during emergency braking to prevent overload in the transmission system and other drivetrain components, thereby providing a certain level of protection.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.