What are the dimensions of a 4.2-meter vehicle?

1 Answers
LaHailey
07/30/25 5:43am
Generally, a 4.2-meter truck has a length of 4.2 meters, a width of 1.6 to 1.8 meters, and a height of 1.6 to 1.8 meters. Height restrictions: For heavy and medium-duty trucks, as well as semi-trailers, the height of the cargo from the ground must not exceed 4 meters. For vehicles transporting containers, the height must not exceed 4.2 meters. For other cargo-carrying motor vehicles, the height must not exceed 2.5 meters from the ground. Width restrictions: According to the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China,' the width must not exceed the width of the vehicle compartment. For two-wheeled motorcycles, the cargo width must not extend more than 0.15 meters beyond the handlebars on either side. For three-wheeled motorcycles, the cargo width must not exceed the width of the vehicle body.
Was this review help?
7
0
Share
More Forum Discussions

Does Car Painting Require Polishing?

Car painting requires polishing, but it is not recommended to polish immediately. It is advised to wait three to seven days after painting before performing the polishing process. After repainting, the car can be washed and used normally in about 24 hours. Car painting forms a protective film on the surface, protecting the body from corrosion and extending the vehicle's lifespan. Additionally, the paint application can enhance the car's visual appeal. Choosing different types and colors of car paint can showcase the vehicle's unique personality. Cars have high requirements for paint, not only demanding excellent mechanical performance but also strong scratch resistance and long-lasting gloss.
18
2
Share

What are the symptoms of a malfunctioning fuel injector?

Symptoms of a malfunctioning fuel injector: 1. Engine shaking: When the fuel injector is damaged and fuel injection is obstructed, the engine may exhibit operational shaking during operation; 2. Reduced power and increased fuel consumption: As the fuel injector deteriorates, the fuel injection volume and pressure cannot be guaranteed, leading to symptoms such as decreased vehicle power and increased fuel consumption; 3. Increased tailpipe emissions pollution: Faulty fuel injectors inevitably affect the mixing and combustion of the air-fuel mixture, resulting in increased pollutant emissions from the vehicle's exhaust; 4. Difficulty starting or even stalling: If the fuel injector is severely damaged, the vehicle may experience difficulty starting or even sudden stalling while driving; 5. Engine misfire: If the fuel injector of a specific cylinder is severely damaged, the engine is highly likely to misfire, causing severe shaking of the engine; 6. Black smoke from the exhaust: As the fuel injector fails, the atomization of fuel and its mixture with air cannot be ensured, leading to incomplete combustion of the air-fuel mixture, resulting in black smoke from the exhaust and increased engine carbon deposits.
12
0
Share

How Long After Spray Painting Can You Wash the Car?

The time you can wash your car after spray painting is divided into: 1. If the painting is done in a paint booth, you can wash the car as soon as it is driven out; 2. If painted at a professional shop, you can wash the car when the staff hands over the vehicle; 3. If painted and picked up on the same day, wait 2 days before washing; 4. At lower temperatures, avoid washing the car for a week. The functions of car spray painting: 1. Protects the car from erosion by various corrosive agents in the atmosphere; 2. Applying bright-colored paint enhances the car's appearance, showcases its personality, and elevates its grade; 3. The color of the car paint can serve as a mark for the type and purpose of the vehicle; 4. Improves the car's comfort and sealing, preventing noise caused by vibrations.
2
3
Share

What are the test items for C1 license subject 2?

The C1 subject 2 test mainly consists of five items: reversing into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. For automatic transmission (C2), the hill start and stop is not included in subject 2. The C1 driving license allows driving small and micro passenger vehicles, etc. Subject 2 test tips: Before starting the car during the subject 2 test, adjust the seat height, adjust the rearview mirror to ensure a wide field of vision, and fasten the seat belt. During the test, do not stop unless the voice prompts a failure. For parallel parking, remember to find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the car's speed. For hill start, remember to pull the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and gently press the accelerator while releasing the clutch to avoid stalling or rolling back. For right-angle turning, find the reference point before turning and coordinate with the car's speed. For curve driving (S-turn), slow down and drive carefully. For reversing into a garage, control the speed, find the reference point, and make minor adjustments if there is any deviation observed in the rearview mirror. Subject 2 deduction items: Reversing into a garage: If the car body crosses the line, 100 points are deducted, and the test is failed; if the car is not fully parked in the garage, 100 points are deducted, and the test is failed; stopping midway deducts 5 points each time; failing to complete the test within the specified time deducts 100 points, and the test is failed. Parallel parking: If the car body crosses the line after stopping in the garage, 100 points are deducted, and the test is failed; stopping midway deducts 5 points each time; if the tires or car body touch the curb, 10 points are deducted; failing to complete the test within the specified time deducts 100 points, and the test is failed. Curve driving: If the wheels cross the road edge line, the test is failed; stopping midway results in failure; driving in a gear lower than second deducts 5 points. Right-angle turning: If the wheels cross the road edge line, the test is failed; stopping midway deducts 5 points each time. Hill start and stop: If the car's front bumper or motorcycle's front axle is not aligned with the pole line and exceeds 50 cm, the test is failed; exceeding the specified start time results in failure; if the car's front bumper or motorcycle's front axle is not aligned with the pole line but does not exceed 50 cm, 10 points are deducted; if the car body is more than 30 cm but less than 50 cm from the road edge line, 10 points are deducted; failing to tighten the parking brake deducts 10 points. The C1 test consists of four subjects, and the other items are as follows: Subject 1: Mainly tests basic road traffic knowledge. Subject 3: Mainly tests 16 driving skills, including preparation for starting, starting, and driving straight. Subject 4: Mainly tests safe and civilized driving requirements, similar to subject 1, and is a theoretical test.
20
1
Share

What does GT mean in sports cars?

In sports cars, GT refers to Grand Tourer, with the Latin term Gran Turismo translating to Grand Tourer in English. Grand means luxury, and Tourer means traveler or cruiser. Traditionally, GT denotes high-powered sports cars with two seats or a 2+2 seating arrangement. To ensure comfort during long-distance travel, they typically feature front-engine or front-mid-engine layouts, providing ample cabin and luggage space. Compared to supercars that purely pursue speed, GT cars place greater emphasis on comfort in terms of suspension tuning and interior configurations. Therefore, GT sports cars combine the outstanding performance of supercars with the driving comfort of touring cars.
20
5
Share

How to Determine if a Car Battery Has Power?

Determining whether a car battery has power can be done through the light test method. The steps are as follows: 1. Turn on the car's headlights and engage the starter motor, then observe the brightness of the lights to assess the battery's charge level. 2. If the lights appear dim, it indicates a significant discharge in the battery, requiring recharging. 3. If the starter motor operates normally and the lights maintain sufficient brightness, it means the battery voltage is stable and the charge is adequate. 4. If the lights turn dim red and quickly go out after engaging the starter, it suggests severe battery discharge or sulfation, necessitating prompt desulfation treatment or battery replacement. A car battery consists of positive and negative plates, separators, electrolyte, case, connecting straps, and terminals.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.