What are the dimensions for reverse parking markings?
1 Answers
The standard dimensions for reverse parking garages are as follows: For small cars, the garage length is 5.25 meters and the width is 2.3 meters. For large vehicles, the dimensions are 16 meters in length and 6.83 meters in width. The evaluation criteria for reverse parking: failing to follow the designated route or sequence results in disqualification; the vehicle body crossing the line results in disqualification; failing to fully enter the garage results in disqualification; stopping midway results in disqualification; exceeding 4 minutes results in disqualification. Reverse parking mnemonic: Reversing in and out isn't hard, fasten seatbelt, shift gear, flash left light. Press clutch, release handbrake, slowly lift clutch to start gently. Align the right line to adjust the car body, left mirror vertical gap follows the right line. Stop when the front line aligns with the shoulder, shift to reverse gear, release the clutch. When the left mirror covers the corner of the horizontal line, turn the steering wheel fully to the right. Watch the left mirror for the garage line, at a 30-degree angle, turn back one round. When the car is parallel to the line, straighten the wheel by turning two full rounds. When the left mirror covers the front corner of the garage, press the clutch and brake. Shift to first gear to exit, turn the wheel fully left when the car head touches the line. Stop when the car head covers the line, keep the wheel position to reverse. Watch the right mirror for the garage line, at a 30-degree angle, turn back one round. When the car is parallel to the line, straighten the wheel by turning two full rounds. When the left mirror covers the front corner of the garage, press the clutch and brake. Shift to first gear to exit, turn the wheel fully right when the car head touches the line. Stop when the car head covers the line, adjust the car body skillfully. The new garages have no poles to reference, only ground markings. The garage length is much shorter, just enough for a car to fit completely. The process involves reversing in from the right, driving out to the left, reversing back in, and finally driving out to return to the starting point. This process is much simpler, eliminating the current test step of moving the car within the garage.
