···
Log in / Register

What are the dimensions and specifications of the Touareg?

3 Answers
Jodi
07/29/25 7:29am
Touareg dimensions and specifications are: The body length is 5039mm, width 1989mm, height 1773mm, with a wheelbase of 2980mm. It is equipped with a low-power version 2.0L turbocharged engine, a high-power version 2.0L turbocharged engine, and a 2.5L V6 turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum torque of 320 Nm. The Touareg is a new mid-to-large SUV under SAIC Volkswagen. In terms of exterior design, the new model features a dual-slat chrome horizontal grille that extends directly into the headlight assembly. It comes equipped with adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, front seat heating, and a panoramic sunroof.
Was this review help?
3
5
Share
StGenesis
08/13/25 1:06am
I've been driving the Touareg for several years. The car is quite large, with a length of about 5052 mm, a width of 1989 mm, and a height of approximately 1773 mm. The wheelbase is exactly 2980 mm. The interior space is particularly spacious. When my family of five travels, three people can sit comfortably in the second row, and the third row is also practical without feeling cramped. The trunk is big enough to fit four or five suitcases, making family trips very convenient. Parking can be a bit troublesome due to the car's width, especially in narrow roads or small parking spaces in old urban areas. On the highway, it's stable, but the high body can sway slightly in crosswinds. The fuel consumption is a bit high, around 10 liters per 100 km. Overall, for a large-sized SUV, the cost-performance ratio is decent, and the spaciousness makes up for the shortcomings.
Was this review help?
8
3
Share
Expand All
LeilaniLee
10/04/25 7:26am
From my driving experience, the dimensions of the Touareg are 5052mm in length, 1989mm in width, 1773mm in height, with a wheelbase of 2980mm. The long wheelbase provides more stable handling, and the body roll control during turns is good, but the tall height affects wind resistance, resulting in slightly slower acceleration. The width of nearly 2 meters can make parking in small spaces a bit challenging, so I recommend opting for the version with a 360-degree panoramic view. The interior width is ample, comfortably seating three adults without feeling cramped. The standard trunk capacity is around 800 liters, expanding even more when the seats are folded down. The vehicle weighs nearly 2 tons, leading to higher fuel consumption compared to smaller cars, but the reinforced safety structure and sturdy frame offer excellent protection in high-speed collisions. Daily driving requires attention to tire wear.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

Why is the headlight of Chery Arrizo 5 not working?

The reasons and solutions for the headlight of Chery Arrizo 5 not working are as follows: Bulb failure: If you have a spare bulb, simply replace it. If there is no bulb available for replacement, such as when the low beam bulb is damaged, you can use the high beam to drive, but this will cause significant inconvenience to oncoming vehicles. Fuse blown: Check the relevant fuse. If the fuse is indeed blown, simply replace it with a fuse of the same capacity. Poor contact in the power socket: Walk to the front of the car and tap the cover of the non-working headlight. If the headlight briefly lights up, it can be confirmed that the socket has poor contact. In this case, simply unplug the headlight's power socket and plug it back in.
15
5
Share

Does the New BMW 7 Series Need a Break-in Period?

BMW 7 Series new cars require a break-in period, as every new vehicle sold needs to go through this initial phase in the owner's hands. Definition of break-in period: The break-in period generally refers to the process where mechanical components initially come into contact, friction, and engagement during operation. Precautions during break-in period: Avoid emergency braking whenever possible: Emergency braking not only shocks the braking system during break-in but also increases impact loads on the chassis and engine. It's best to avoid emergency braking within the first 300 kilometers of driving. Avoid overloading: If a new car operates at full capacity during the break-in period, it may cause damage to mechanical components. Therefore, within the first 1,000 kilometers of driving, the load should generally not exceed 75-80% of the rated capacity.
16
1
Share

What Causes the Abnormal Noise in Geely Borui's Engine?

The main reasons for abnormal noise in the BMW B48 engine are as follows: Long-term parking of the car: Engine oil flows back to the oil pan, and the oil pump cannot immediately establish oil pressure during a cold start, especially in the upper part of the engine. The valves do not receive sufficient lubrication, and the hydraulic lifters and mechanical rocker arms fail to operate normally, leading to abnormal noise. High viscosity of engine oil: This can result in insufficient lubrication during engine operation, causing friction and abnormal noise. Abnormal noise from the timing gear: After prolonged use, coupled with improper gear clearance adjustment and hardening of the timing belt, the gear may experience excessive wear. In severe cases, the gear teeth may even wear out, causing looseness in gear meshing, which results in abnormal noise during engine operation.
3
0
Share

What is the Pame car?

Pame refers to the Porsche Panamera. Introduction to Panamera's powertrain: The Porsche Panamera features luxurious interiors and is powered by a 4.8-liter V8 engine, reportedly derived from the facelifted Cayenne. It comes standard with a 7-speed dual-clutch transmission, with mid-range and top-tier models equipped with all-wheel drive. The car can accelerate from 0 to 100 km/h in 3.8 seconds, with a top speed nearing 310 km/h. Mid-range models achieve 0-100 km/h acceleration in 4.2-5.4 seconds. Introduction to Panamera's exterior: The car boasts smooth and flowing body lines with a four-door design. The front features large air intakes on each side, intersected by horizontal fog lights. The side profile is clean and soft, complemented by five-spoke wheel rims and yellow brake calipers, giving it a very sporty appearance.
10
0
Share

Why does the Audi A8's air conditioning suddenly stop cooling?

Audi A8's air conditioning suddenly stops cooling for the following reasons and solutions: Insufficient or low refrigerant: It may be caused by a small refrigerant leak. You can observe it from the sight glass on the dryer tank. When the air conditioning is running normally, if there are continuous and slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it indicates a severe lack of refrigerant. In this case, simply add refrigerant. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor will slip during operation, leading to a decrease in transmission efficiency and a drop in compressor speed. The delivery of compressed refrigerant decreases, resulting in the car air conditioning not cooling. If the compressor drive belt of the car air conditioning is too loose, it should be tightened. If it cannot be turned by hand, it means the drive belt is too tight and should be slightly loosened. If tightening is ineffective or the drive belt has cracks, aging, or other damage, a new drive belt should be replaced.
6
0
Share

What is the displacement of the new Santana?

The displacement of the new Santana is as follows: 1.4L manual fashion version; 1.6L manual comfort version; The Santana svw-7180-LED has a 1.8L displacement. Introduction to displacement: A specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Displacement identification: Most domestically produced cars have a model number at the rear consisting of pinyin letters and Arabic numerals, which includes the following three parts: The first part consists of 2 or 3 pinyin letters, serving as the code to identify the manufacturer. The middle two digits represent the engine displacement of the car model, for example, "08" indicates an engine displacement of 0.8 liters, and "20" indicates 2.0 liters.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.