What are the dimensional differences between the Borgward BX5 and BX7?

How Long Does It Take to Fully Charge the Battery at Idle Speed?

Different battery capacities require varying charging times. For a 60Ah battery, it takes approximately 2 to 3 hours at idle speed to fully charge. During idle, although the engine speed is low, it can still drive the alternator to work, thus outputting a stable DC voltage. Since the battery power is relatively low, charging is possible at idle speed, albeit at a slower rate. Precautions for Charging at Idle Speed: Avoid Using Other Power-consuming Devices: When the car battery is low and charging at idle speed, the current is low but sufficient to complete the charging process. If additional power-consuming devices are turned on during charging, the battery may be overdrawn, leading to permanent damage. Therefore, during idle speed charging, it is advisable to turn off high-power electrical devices in the car to ensure safer and more reliable charging. No Need to Rev the Engine: Revving the engine to increase speed does not enhance charging efficiency. It is entirely unnecessary to rev the engine while idling. Idle Charging Duration: If the car has been parked for a week, idling for 10 minutes will ensure sufficient charge. For cars parked for over 20 days, idling for 20 to 30 minutes is more reliable.

10

1

Share

What Are the Main Functions of Automotive Sensors?

Automotive sensors serve many primary functions. Oxygen Sensor: The function of this sensor is to measure whether there is excess oxygen in the exhaust gases after engine combustion, i.e., the oxygen content, and convert this information into a voltage signal sent to the engine computer. This enables the engine to achieve closed-loop control targeted at the excess air factor. Wheel Speed Sensor: The wheel speed sensor is used to measure the rotational speed of the vehicle's wheels. Common types of wheel speed sensors include: magnetic wheel speed sensors and Hall-effect wheel speed sensors. Coolant Temperature Sensor: The function of the coolant temperature sensor is relatively straightforward—it utilizes changes in its internal resistance to alter the current passing through it, thereby driving the changes in the coolant temperature gauge.

8

3

Share

What does the first and second maintenance mean?

First and second maintenance refers to the abbreviation of the second-level maintenance or second-level servicing of a car. Below is a related introduction to car maintenance: Engine oil change: The main function of engine oil is to provide good lubrication for the engine. Upon reaching the maintenance cycle, basic maintenance requires changing the engine oil to ensure its good performance and the lubrication effect of the engine. The engine oil should be changed according to the car's basic maintenance cycle. Common car maintenance cycles are 5,000 kilometers or 6 months, and 10,000 kilometers or 12 months, whichever comes first. Oil filter replacement: The oil filter, also known as the oil filter element, is mainly used to filter impurities in the engine oil to maintain its performance. After a period of use, its filtering performance will decline. Therefore, when changing the engine oil, the oil filter should also be replaced.

4

1

Share

Should the Accord use 92 or 95 octane gasoline?

If it is an Accord equipped with a turbocharged engine, it is recommended to use 95 octane gasoline. For older Accord models with naturally aspirated engines, 92 octane gasoline is sufficient. The octane rating of gasoline represents the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the octane number, the stronger the anti-knock performance. Standard gasoline is composed of isooctane and n-heptane. A higher octane number does not necessarily mean better performance; the appropriate gasoline grade should be selected based on the engine's compression ratio. Different gasoline grades correspond to different engine compression ratio requirements. The higher the engine's compression ratio, the higher the required gasoline grade. Generally, engines with a compression ratio above 8.0 should use 92 octane gasoline; those above 9.0 should use 95 octane gasoline; and those above 10.0 should use 98 octane gasoline. For vehicles that have been in long-term use, adding a gasoline additive to the fuel tank can effectively remove carbon deposits, sludge, and other deposits in the engine's fuel system. After using a gasoline additive, the vehicle may exhibit stronger power, better fuel economy, improved idle stability, and reduced emissions.

17

1

Share

Is It Harmful to Install Ambient Lights by Dismantling Car Doors?

Installing ambient lights will not cause any damage to the car. Ambient lights are also equipped with fuses during installation, so short circuits or open circuits will not affect other components. However, it may have an impact on the car's battery, so it is recommended to turn off the ambient lights when the engine is not running. The functions of car ambient lights: Car ambient lights can enhance the in-car experience, elevate the overall grade of the vehicle, and showcase different in-car atmospheres. They can help soothe the driver's mood and change the monotonous state of the car at night, making it more recognizable. Additionally, modern ambient lights offer multiple color options and feature voice-controlled switching functions. Precautions for installing car ambient lights: Ambient lights are typically LED-type lights, which are very flexible in material and can be installed in any location. However, installation must be reasonable, usually placed in the fine seams of door panel edges or under the center console. Please ensure that the brightness of the installed ambient lights is not too high and does not interfere with normal driving behavior.

9

4

Share

Will a Motorcycle Explode if Ridden with an Oil Leak?

Riding a motorcycle with an oil leak can cause an explosion because the leaked gasoline can ignite when exposed to the hot engine, leading to an explosion. There are many consequences of motorcycle oil leaks. Quality Issues: Poor quality of products (parts) and materials; substandard craftsmanship; structural design flaws. Improper Assembly and Adjustment: Unclean mating surfaces; damaged, displaced, or improperly installed gaskets. Uneven Tightening of Fastening Nuts: Thread stripping, broken fasteners, or loose components leading to operational failure. Exceeding Service Life: Wear and tear of sealing materials beyond limits after prolonged use; aging, deterioration, or deformation leading to failure. Oil-related Issues: Excessive lubrication, oil level too high, or incorrect oil type used. Warped mating surfaces or damaged casings causing oil leakage.

10

4

Share

What are the dimensional differences between the Borgward BX5 and BX7?

How Long Does It Take to Fully Charge the Battery at Idle Speed?

What Are the Main Functions of Automotive Sensors?

What does the first and second maintenance mean?

Should the Accord use 92 or 95 octane gasoline?

Is It Harmful to Install Ambient Lights by Dismantling Car Doors?

Will a Motorcycle Explode if Ridden with an Oil Leak?

Should You Engage P Mode First or Apply the Electronic Parking Brake First?

What vehicles can use 101 octane gasoline?

Are Didi cars forcibly scrapped after 8 years?

What do the + and - signs on an automatic transmission mean?