What are the differences in exterior dimensions between ES and LS?

1 Answers
DiMartin
07/30/25 9:31am
The differences in exterior dimensions between ES and LS are: The ES has a length of 4975mm, width of 1866mm, height of 1447mm, and a wheelbase of 2870mm; The LS has a length of 5235mm, width of 1900mm, height of 1450mm, and a wheelbase of 3125mm. The ES is equipped with a 2.0L naturally aspirated engine with a maximum power of 127kW and maximum torque of 208Nm, paired with a CVT continuously variable transmission. The LS is equipped with a 3.5L naturally aspirated engine with a maximum power of 220kW and maximum torque of 350Nm, paired with an ECVT plus automatic transmission.
Was this review help?
14
0
Share
More Forum Discussions

Which country does the Wrangler brand belong to?

The Wrangler is a model under the American Chrysler's JEEP brand, with main variants including the High Altitude four-door, Sahara four-door, Rubicon four-door, and the High Altitude Alaska Aurora Green Special Edition. The Wrangler's emblem is the JEEP logo, positioned above the license plate, where the metallic English word 'Jeep' succinctly displays the vehicle's brand. Key milestones in the Wrangler's development are as follows: 1986: AMC officially launched the first-generation Wrangler. 1987: Chrysler officially acquired AMC. 1997: Chrysler updated the Jeep Wrangler, introducing the second-generation TJ model. 2007: The third-generation Wrangler (JK) was officially released and introduced to the domestic market. 2019: The fourth-generation Wrangler Unlimited was launched.
9
0
Share

What to Do if a Volkswagen Car Burns Engine Oil?

Here are the methods to handle engine oil burning in Volkswagen cars: 1. Regularly maintain the vehicle. 2. Before driving, thoroughly inspect all parts of the vehicle and ensure safety checks are completed. 3. Do not overfill the engine oil, as excessive oil can lead to leaks and burning. 4. During driving, periodically check the vehicle in safe parking areas to prevent oil burning incidents. 5. Avoid high-speed or ultra-high-speed driving, as excessive speed can cause certain parts to overheat, leading to oil burning. If an oil burning incident occurs, stay calm, extinguish any flames immediately, stop the vehicle, and evacuate all passengers to a safe location. Then, call for emergency assistance.
10
0
Share

What does R status on a driver's license mean?

Driver's license status marked with R indicates a deregistered license, meaning it has not undergone annual review and was canceled by the system. Below is relevant information about driver's licenses: 1. License categories: China implements a tiered motor vehicle driver's license system, classifying licenses into 15 categories - A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. 2. Point system and review: The accumulation cycle for traffic violation points (scoring cycle) is 12 months with a maximum of 12 points, calculated from the date of initial license issuance. Based on the severity of traffic violations, point deductions are categorized into five levels: 12 points, 6 points, 3 points, 2 points, and 1 point.
5
1
Share

How to Unscrew Rusty License Plate Bolts?

Methods to unscrew rusty license plate bolts: 1. Use a rust remover to clean the threads, then try to unscrew it; 2. Prepare a flathead screwdriver and a Phillips screwdriver, each equipped with an angle grinder. Connect the angle grinder to the power source, plug it in, then hold the grinder's handle with both hands. Use your right hand to turn on the angle grinder's switch, and cut a straight slot on the license plate bolt cap with the angle grinder to remove it. For car owners without an angle grinder, you can try using needle-nose pliers or duckbill pliers to firmly grip the bolt ring. Once the bolt ring is deformed, release the pliers, then insert a flathead screwdriver into the deformed area and use inertia to remove the bolt cap. After removing the license plate bolts, be sure to clean up the bolts promptly and avoid littering, as they could potentially puncture the vehicle's tires.
18
0
Share

Vehicle Scrapping and License Plate Retention Process?

Apply within six months after completing the transfer or cancellation registration; the vehicle owner must have owned the original vehicle for more than three years; all traffic violations and accident liabilities related to the original vehicle must be settled. Can a vehicle be scrapped in a different location: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the place of registration, the owner may sell the scrapped vehicle to a recycling enterprise in the vehicle's current location. How long can a license plate be retained after vehicle scrapping: According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation registration of a motor vehicle, the original owner may apply to the vehicle management office to use the original license plate number when registering a newly purchased vehicle. The application to use the original license plate number must meet the following conditions: (1) apply within six months after completing the transfer or cancellation registration; (2) the vehicle owner must have owned the original vehicle for more than three years.
3
3
Share

What Causes the Clicking Sound Outside the Car When Shifting an Automatic Transmission?

Automatic transmission shifting with abnormal sounds can be attributed to the following reasons: 1. Large valve clearance when the engine is cold: Poor lubrication during the transition from cold to hot engine state may cause noise when shifting, lasting about 3 minutes, which is a normal phenomenon. 2. Problems caused by parking on a slope: If the P (Park) gear is engaged first before applying the handbrake when parking on a slope, an external force due to inertia will cause the vehicle's weight to be entirely borne by the P gear, resulting in noise when shifting; if the handbrake is applied first, the handbrake bears the force, and no noise will occur. 3. Transmission issues: Wear and tear on the transmission, loose drive shaft, differential wear, wear on the transmission's output shaft, gear wear, or malfunctioning shift mechanism require immediate attention at a 4S shop or professional auto repair shop for technician repair.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.