What are the differences in engine displacement?

1 Answers
StRhett
07/28/25 11:16pm
The differences in engine displacement include variations in top speed, acceleration capability, and fuel economy. Below are detailed explanations of these differences: Top speed varies: Different displacements result in varying maximum speeds achievable by the vehicle, which also affects the car's performance when fully loaded on a good level road. Acceleration capability differs: Different displacements lead to variations in acceleration time, performance, and distance. Fuel economy varies: Vehicles with different displacements offer different fuel economies. The size of the displacement can also reflect the relationship between carrying capacity and fuel consumption. Under the same technical level and objective conditions, larger displacements consume more fuel.
Was this review help?
1
3
Share
More Forum Discussions

What is the difference between Volkswagen's 2.0T high-power and low-power engines?

There is no difference in engine hardware. The high-power engine is mainly optimized for performance, while the low-power engine is primarily optimized for fuel efficiency and cost. Below are the relevant details about power: 1. Reason: The engine hardware is identical, but different performance levels are achieved by adjusting the ECU data, combined with variations in vehicle configurations to position the vehicle differently. Turbocharged engines can control the turbocharger via the ECU to achieve different boost pressures, allowing power to be easily reduced by lowering the boost pressure. Typically, such engines are designed for high power, and reducing the power does not affect reliability. However, the low-power engine is not specifically optimized, so fuel consumption is generally similar to the high-power version. 2. Differences between high and low power: The high and low-power versions also differ in valve train structure. The low-power version features a dual-cycle system for better fuel economy. Simply put, by adjusting the entire valve train structure, it sacrifices some power at low RPM to achieve better fuel efficiency, which the high-power version does not have. Additionally, this may affect many supporting systems, such as cooling system pipelines, cooling fans, engine motors, and the turbocharger.
3
4
Share

How to Cancel the Exemption from Inspection Applied for on 12123?

To cancel the application for the exemption from inspection on 12123, you can do so via the 12123 APP, visit the vehicle management office to cancel the application, or call the vehicle management office to cancel the application. Related details are as follows: 1. Introduction to 12123: 12123 is a mobile APP where you can apply for the exemption from inspection. 2. Regulations on Exemption from Inspection: According to the new regulations, non-commercial vehicles within 6 years can apply for online exemption from inspection. Although the vehicles are exempt from inspection for 6 years, it is still necessary to collect the annual inspection label every 2 years. Many vehicle owners apply for the exemption from inspection via the 12123 APP.
20
3
Share

What is the purpose of the shark fin on a car?

The shark fin on a car serves the following purposes: 1. Protection: It features an external shell with internal anti-theft components, effectively preventing theft of the external car antenna. The shell also provides waterproof and dustproof functions, enhancing the antenna's durability. During automatic car washes, there's no need to remove the antenna—it can be cleaned directly. 2. Reduced Resistance: Designed in the shape of a shark fin, it is more aerodynamic than traditional rod-shaped antennas, reducing air resistance while driving and notably lowering wind noise. Additionally, the shark fin antenna's increased side area improves electronic signal capture. 3. Damage Prevention: Positioned on the roof, the shark fin antenna concentrates static electricity at its tail tip and discharges it, effectively preventing damage to onboard electronic devices from accumulated static. 4. Signal Reception: Modern cars require reception of various signals beyond just FM radio waves, including GPS, GSM, and other electronic signals. Many shark fin antennas integrate functions related to receiving these signals.
15
1
Share

What Are the Differences Between Good and Bad Automotive Explosion-Proof Films?

There are several key differences between good and bad automotive explosion-proof films: 1. Light transmittance: High-quality front windshield films should have a light transmittance of over 80%, while side window films should ideally have a light transmittance of more than 35%. 2. Scratch resistance: Premium films feature a scratch-resistant layer that protects the surface from damage under normal use; lower-grade films are more prone to scratches, leading to reduced clarity. 3. Explosion-proof performance: Inferior films are thin, feel soft, lack sufficient toughness, cannot block UV rays, and are prone to aging and brittleness. In the event of an impact or collision, they easily break and fail to adhere to the glass. High-quality explosion-proof films use special polyester materials with strong toughness and are paired with pressure-sensitive adhesives, ensuring that the film remains bonded to the glass during collisions to prevent shattering and injury.
18
4
Share

What to Do When Push-Button Start Fails to Ignite in Winter?

There are many reasons why a push-button start may fail to ignite in winter, and solutions vary depending on the issue. Below are the common causes and their solutions: 1. Steering wheel lock preventing ignition: If the steering wheel is not straightened when parked and remains at a slightly larger angle (e.g., over 30 degrees), it may automatically lock as an anti-theft measure. This can make the key difficult to turn, preventing ignition. Solution: Apply force to turn the steering wheel while simultaneously turning the key to unlock it, then attempt to start the car. 2. Smart key battery depletion: Even if the key is inside the car, the dashboard may display 'key matching error' due to a weak battery in the smart key, making the start system unable to detect its faint signal. Solution: Place the smart key directly on the start button and press the button to start. If the remote key is depleted or fails to match for other reasons, insert it into the emergency backup key slot and press the start button. 3. New car not pressing the brake before push-button start: For borrowed or newly purchased vehicles with push-button start, pressing the brake is necessary for ignition. Pressing the start button without the brake only activates the electrical system but does not start the car. Solution: Press the brake before using the push-button start.
5
4
Share

What are the dimensions of the Buick Excelle?

Buick Excelle's length, width, and height dimensions are 4609mm/1798mm/1464mm, which are official data. The length of the Buick Excelle refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Buick Excelle has a maximum power of 83kW and a maximum torque of 141 N·m. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. This engine is paired with a 6-speed automatic manual transmission (AT). There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.