What are the differences in appearance between the Nissan Sylphy and Teana?

1 Answers
KathrynLynn
07/29/25 10:02pm
The most significant difference in appearance between the Sylphy and Teana lies in their body dimensions. Taking the latest models as examples, the Teana is positioned as a mid-size sedan with dimensions of 4901mm*1850mm*1450mm, while the Sylphy is a compact car with dimensions of 4631mm*1760mm*1503mm. Additionally, the configurations of these two models differ substantially. Sylphy: Equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122 HP, maximum power of 92kW, and maximum torque of 155Nm. It has a top speed of 188km/h, a wheelbase of 2700mm, front track of 1540mm, rear track of 1540mm, fuel tank capacity of 50L, and curb weight of 1188KG. The front suspension uses MacPherson strut independent suspension, and the rear suspension employs a torsion beam non-independent suspension. Teana: Equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 156 HP, maximum power of 115kW, and maximum torque of 197Nm. It has a top speed of 197km/h, a wheelbase of 2825mm, front track of 1620mm, rear track of 1620mm, fuel tank capacity of 61.3L, and curb weight of 1456KG. The front suspension uses MacPherson strut independent suspension, and the rear suspension employs a multi-link independent suspension with trapezoidal control arms.
Was this review help?
11
4
Share
More Forum Discussions

Should the Geely Vision use 92 or 95 octane gasoline?

Geely Vision is equipped with a 1.5L naturally aspirated engine across all models, so 92 octane gasoline is sufficient for this vehicle. Gasolines with different octane ratings have varying levels of octane numbers—higher octane ratings indicate greater stability. Generally, 92 octane gasoline is adequate for naturally aspirated engines in family cars. Below is relevant information about selecting engine oil for the Geely Vision: 1. Choose engine oil based on the engine's requirements. There's no need to use high-grade oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher demands. 2. Multi-grade oil is recommended as it is economical, long-lasting, efficient, and provides better protection for the engine. Due to the characteristics of multi-grade oil, phenomena such as premature darkening or lower oil pressure compared to conventional oil may occur during use, which are normal.
13
0
Share

What are the engine models of the Haval H6?

Haval H6 has used a total of three engines, namely a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. The Haval H6 is a compact SUV under the Haval brand, with a wheelbase of 2680 mm, and dimensions of 4615 mm in length, 1860 mm in width, and 1720 mm in height. Below are the details of the Haval H6 engines: 1. Low-power version 1.5-liter turbocharged engine: This engine delivers 150 horsepower and a maximum torque of 210 Nm, with a maximum power speed of 5600 rpm and a maximum torque speed ranging from 1800 to 4400 rpm. 2. High-power version 1.5-liter turbocharged engine: This engine produces 169 horsepower and a maximum torque of 285 Nm, with a maximum power speed ranging from 5000 to 5600 rpm and a maximum torque speed ranging from 1400 to 3600 rpm. This engine is equipped with CVVL technology and direct fuel injection, and uses an aluminum alloy cylinder head and block. 3. 2.0-liter turbocharged engine: This engine generates 224 horsepower and a maximum torque of 385 Nm, with a maximum power speed of 5500 rpm and a maximum torque speed ranging from 1800 to 3600 rpm. All three engines are paired with a 7-speed dual-clutch transmission. The dual-clutch transmission offers fast gear shifting and high transmission efficiency.
11
5
Share

How to Close the Front Hood of the Nissan Sylphy?

When closing the engine hood of the Nissan Sylphy, first lower the hood support bracket with one hand while supporting the hood with the other hand. Slowly move it downward until the hood is about 50mm-60mm from closing, then release it to let it fall freely. You will hear a "clunk" sound, indicating the hood is locked. Below is some related information about the Sylphy's front hood: 1. The engine hood release switch inside the Sylphy is located below the left side of the dashboard. Gently pull the switch, and the engine hood will open slightly. Then, go to the front of the engine compartment, reach into the gap, and pull the latch upward to fully open the hood. 2. It is best not to slam the hood shut. Avoid applying too much force to the center of the hood, as it is made of aluminum alloy and excessive force can cause dents. The engine hood is typically structured with heat insulation material sandwiched in the middle, and the inner panel enhances rigidity. The geometric shape is designed by the manufacturer, usually in a skeletal form.
16
1
Share

What does the flashing red key on the Mazda3 Axela mean?

The flashing red key on the Mazda3 Axela indicates: The flashing red key on the Mazda3 Axela may indicate that the key's battery is dead or the key is out of the working range and cannot be detected. The solution is to replace the battery or bring the key within the working range. In addition to daily use for locking and unlocking the vehicle, the car key also has some hidden functions. Here are the related details: 1. Window closing function after turning off the engine. For drivers who have already exited the vehicle, pressing or holding the lock button can automatically close the windows. 2. Automatic trunk opening. Many keys have a trunk opening button. Pressing or double-clicking the trunk unlock button can automatically open the trunk. 3. Remote window opening. 4. Opening a single door. Pressing the unlock button can open only the driver's door, while other doors remain locked. 5. The small piece of paper on the car key. This serves as proof for key replacement in case the key is lost.
1
1
Share

Where is the cabin air filter of Oshan X70A located?

The cabin air filter of Oshan X70A is located on the passenger side, beneath the glove compartment near the center console. Looking upwards from the floor, you can see arrow indicators pointing to the three clips of the cabin air filter housing. Gently pry them open to access the cabin air filter inside. Below is an introduction to the functions of the cabin air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities from the air such as dust, pollen, and abrasive particles. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption capabilities.
11
1
Share

Where is the VIN number located on the Leiling?

The VIN number of the Leiling is located at the lower left corner of the front windshield. Here is an explanation about the VIN number: The VIN number is the vehicle identification number, which consists of 17 digits and letters. It represents the number on the frame, transmission, and engine support frame, serving as the car's ID number. Below is the meaning of each of the 17 digits and letters: Characters 1-3: Represent the country of production, manufacturer, and vehicle type. Characters 4-8: Represent vehicle characteristics, such as vehicle category, engine type, body type, etc. Character 9: Represents the check digit, used to verify if the VIN is correctly filled. Character 10: Represents the production year. Character 11: Represents the assembly location. Characters 12-17: Represent the production sequence number of the vehicle.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.