What are the differences between Volvo S60L and S60?

How to Use Daytime Running Lights?

Unlike other car lights, daytime running lights do not have a switch (except for aftermarket daytime running lights) and cannot be turned on or off at will. They usually turn on automatically when the engine starts and turn off automatically when the driver turns on the regular headlights. Below is some relevant information about daytime running lights: 1. As the name suggests, daytime running lights are used during the day. If used at night, the driver will not get the necessary illumination and may be affected by glare, compromising driving safety. Although daytime running lights appear very bright from the outside, their actual illumination effect is weak and almost useless for the driver inside the car to light up the road. So, remember to turn on the headlights at night. 2. In terms of purpose, daytime running lights and position lights (also known as parking lights) are both signal lights used to alert other vehicles or pedestrians. The difference is that the former is used during the day, while the latter is used in darker conditions.

2

4

Share

How to Operate When Waiting at Traffic Lights During Subject 3 Driving Test?

Subject 3 Driving Test operation steps when waiting at traffic lights are as follows: 1. Steps for stopping at a red light: (1) Observe the traffic signal conditions on the road ahead in advance. If encountering a red light, prepare to decelerate early. (2) After slowing down, gently press the clutch with your left foot (fully depressed), press the brake with your right foot, shift to neutral, and engage the handbrake. 2. Steps for starting at a green light: (1) Wait for about 3-4 seconds (or according to your habit), then slowly release the clutch until the vehicle vibrates slightly, release the handbrake, and start in first gear. (2) After the clutch is properly engaged, maintain this position for about 5 seconds. Even if you release the clutch abruptly, the engine won't stall. Then press the accelerator, speed up, and shift to second gear while crossing the intersection.

20

5

Share

Can You Still Drive with Transmission Slippage?

Transmission slippage means you should not continue driving. Below are the specific reasons for transmission slippage: 1. Check the quality of the hydraulic fluid. If the hydraulic fluid appears brownish-black or has a burnt smell, it indicates that the friction plates of the clutch or brake bands are burnt out, and the automatic transmission should be disassembled for repair. 2. Conduct a road test. A road test can determine whether the automatic transmission is slipping and identify the affected gear and the severity of the slippage. Place the gear selector in different positions and drive the car. If the engine speed suddenly increases when the automatic transmission shifts to a certain gear, but the vehicle speed does not increase accordingly, it indicates slippage in that gear. The easier it is for the engine speed to rise during slippage, the more severe the slippage is. 3. Check the fluid level of the automatic transmission. For an automatic transmission exhibiting slippage, first check the hydraulic fluid level. If the fluid level is too low or too high, adjust it to the normal level before further inspection. If the transmission stops slipping after adjusting the fluid level, disassembling the transmission may not be necessary.

19

3

Share

Can You Continue Driving with a Faulty Transmission Valve Body?

You should not continue driving if the transmission valve body is faulty. A malfunctioning transmission valve body can cause sticking issues. If there is a leak, it may lead to gear shift shocks during the transmission's shifting process, significantly reducing shifting efficiency and also causing a decrease in the vehicle's power. Here are specific details about the transmission valve body: 1. The transmission valve body is a hydraulic control unit. During operation, the spools on the valve body move left and right to change the direction and pressure of the hydraulic fluid, enabling the transmission to shift gears automatically. 2. Damage to the transmission valve body is more common in automatic transmissions. Automatic transmissions, as opposed to manual transmissions, allow the vehicle to shift gears automatically based on driving speed and engine RPM.

19

4

Share

What are the steps for car glazing?

Car glazing process steps are as follows: 1. Cleaning: Before glazing, the car surface needs to be thoroughly cleaned to remove most dust and dirt. Then dry the car surface to avoid affecting the subsequent glazing effect. 2. Polishing: After cleaning, some stubborn dirt may remain that cannot be removed by washing or wiping alone. At this point, a clay bar is used for polishing. After polishing, the paint surface will appear cleaner but may still be slightly rough. Then proceed with polishing treatment, using a polishing machine to carefully polish uneven areas and minor scratches on the car body. 3. Glazing: After polishing, glazing should be done promptly. Pour the glaze onto the car surface and use a specialized orbital polisher to press the glaze into the paint texture, forming a tightly bonded protective mesh film with the paint. This achieves multiple benefits such as enhancing paint brightness, resisting acid and alkali, oxidation, UV rays, and reducing dust adhesion. 4. Wiping: Finally, perform a full car cleaning and wiping. After the glaze has completely penetrated and dried on the paint surface, use a car towel to clean any residual glaze from the paint surface. This completes the entire glazing process.

11

5

Share

Can a Burning Tire Be Extinguished with Water?

Do not use water. When a tire catches fire and emits smoke, blindly dousing it with water can lead to more severe consequences. It is recommended to use a professional fire extinguisher. Below is relevant information about tires: 1. Car tires are made of rubber. Under normal driving conditions, they function without issues. However, during high summer temperatures, prolonged high-speed driving, or emergency braking that generates friction, a significant amount of heat energy is produced. Once the temperature reaches the ignition point, it can cause the tire to self-ignite. After a car tire catches fire, the rubber becomes thinner as it burns, and once melted, it can no longer withstand the tire pressure. 2. Rapidly splashing cold water on the tire can cause abnormal aging of the rubber and even lead to the separation of the tire's inner layers. The burning, melted rubber, being less dense than water, will float on the water's surface and continue to burn. At the same time, the immense pressure may rupture the already weakened tire.

9

3

Share

What are the differences between Volvo S60L and S60?

How to Use Daytime Running Lights?

How to Operate When Waiting at Traffic Lights During Subject 3 Driving Test?

Can You Still Drive with Transmission Slippage?

Can You Continue Driving with a Faulty Transmission Valve Body?

What are the steps for car glazing?

Can a Burning Tire Be Extinguished with Water?

Where is the anti-theft screw for Audi A4?

What to Do When Tire Pressure Warning Keeps Showing?

Where is the air conditioning filter of the Qashqai located?

How to Fix a Broken Manual Seat Height Adjustment?