What are the differences between Volkswagen Lavida and Magotan?

1 Answers
DylanAnn
07/29/25 11:28pm
Volkswagen Lavida and Magotan have the following differences: Interior differences: The interior layouts of both models maintain a high degree of similarity, with the only difference being the configuration changes. The Lavida is clearly a reduced-configuration model, while the Magotan has much richer configurations than the Lavida. After all, you get what you pay for, but the Lavida's overall performance is not inferior to the Magotan. Another difference lies in the workmanship and materials. Due to cost considerations, the Lavida uses hard materials, giving it a more obvious cheap feel, and its detailing is not as good as the Magotan's. Power differences: The Volkswagen Lavida is equipped with a Tiptronic 6-speed automatic transmission, allowing drivers to choose different operation modes under various road conditions, creating driving pleasure; the automatic transmission enables drivers to enjoy both the thrill of driving and the convenience of intelligent vehicle operation; the six-speed high-density gear ratio ensures more even power distribution. The Magotan is powered by a 1.8TSI engine, which is Volkswagen's latest generation of engines. It incorporates the most advanced engine technology in the world and leads the development trend of gasoline engines. The new 1.8TSI engine combines turbocharging technology with gasoline direct injection technology, enabling it to deliver greater power and better torque characteristics.
Was this review help?
15
0
Share
More Forum Discussions

What is the average fuel consumption of the Changan CS75?

The manual transmission model of the Changan CS75 has a fuel consumption of 7.3 liters per 100 kilometers, while the automatic transmission model consumes 8.4 liters per 100 kilometers. The Changan CS75 is a compact SUV under the Changan brand, and all models are equipped with a 1.5-liter turbocharged engine. The dimensions of the Changan CS75 are 4650 mm in length, 1850 mm in width, and 1705 mm in height, with a wheelbase of 2700 mm. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to the constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. Testing Method: The test can be conducted on the road or on a chassis dynamometer, and then the fuel consumption per 100 kilometers is calculated using the "flow meter method" or the "carbon balance method."
14
5
Share

How long after passing the C1 subject 1 test can you take the subject 2 test?

For a C1 driver's license, you can take the subject 2 test 10 days after passing the subject 1 test. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," after passing the subject 1 test for a C1 license, you can schedule the subject 2 test online 10 days later. This provides ample time to prepare for the subject 2 content. Each subject 2 test appointment comes with two attempts. If you fail the first attempt, you can take a free retest. If you do not take the retest or fail the retest, the test session ends, and you can reschedule the subject 2 test after 10 days. Within the validity period of the learner's permit, the number of subject 2 test appointments must not exceed five. If you fail the fifth attempt, all previously passed subjects will be invalidated. To continue pursuing the driver's license, you will need to start over from subject 1. Subject 2 test content: Driving a motor vehicle to complete test items within a designated area; demonstrating mastery of motor vehicle driving skills; and assessing the ability to judge the spatial position of the vehicle. Subject 2, also known as the small road test, includes five mandatory test items: reverse parking, parallel parking, hill start, right-angle turn, and curve driving. Some regions may include a sixth item: highway toll card collection. Subject 2 test precautions: After getting into the car, always adjust the seat and mirrors to a suitable position and state, and always fasten the seatbelt. For parallel parking, remember to find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the car's speed. For hill starts, remember to engage the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and gradually press the accelerator while releasing the clutch to avoid stalling or rolling back. For right-angle turns, react quickly to turn after finding the correct point, and coordinate with the car's speed to avoid deviation. For curve driving (S-turn), slow down and proceed cautiously. Those with good driving sense during practice can pass through smoothly in one go. For reverse parking, control the speed carefully, identify reference points accurately, and make minor adjustments when observing deviations in the rearview mirror. The driving test consists of three subjects: subject 1, subject 2, and subject 3. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the test on field driving skills. Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after subject 3, so it is commonly referred to as subject 4. However, in official terms (i.e., the Ministry of Public Security's Order No. 123), there is no such thing as subject 4.
13
4
Share

Replacement Interval for Automotive Urea Filter

Automotive urea filters are typically replaced based on mileage, generally every 50,000 to 60,000 kilometers. The contaminant-holding capacity of urea filters is limited, so even when using genuine urea solution, regular replacement is necessary. Once the filter loses its filtration effectiveness, impurities in the urea can cause system failures. When selecting automotive urea solution: 1. Certification compliance: Must meet GB29518-2013 standards and have AdBlue certification issued by the German Automotive Industry Association. 2. Valid certification: Must possess CGT certification issued by the China Internal Combustion Engine Industry Association. Products with these three certifications are considered qualified. Substandard products can cause significant damage to the vehicle's three-way catalyst, and once damaged, replacement is the only option, resulting in high repair costs. 3. Regular replacement: Using genuine urea solution and regularly replacing the urea filter ensures normal vehicle operation, prevents engine torque limitation, and maintains proper functioning.
20
3
Share

How Long Do Leather-Wrapped Car Seats Last?

Top-grain leather can last 7-8 years, while split-grain leather can last 6-7 years. Imported microfiber leather can also last around 8 years, and with proper maintenance, it may even exceed 10 years. Below are the main characteristics of microfiber leather: 1. Wear-resistant and breathable: Microfiber leather is made to simulate genuine leather, offering a soft texture. Due to its advantages of being wear-resistant and breathable, it has become an ideal alternative to genuine leather. 2. High cost-performance ratio: Microfiber leather is currently the preferred material for most car owners in China when wrapping car seats. Since top-grain leather seats are quite expensive, many owners, considering their financial situation, are unwilling to pay a high price. Therefore, imported microfiber leather becomes the best choice—economical and capable of achieving even better results than top-grain leather.
18
4
Share

What to Do If a Mouse Gets into the Car?

If a mouse gets into the car, you can drive it out. Relevant measures: 1. Effective methods: Park the car as far away as possible from areas where mice are active, such as garbage dumps, ditches, or grassy areas; Regularly inspect and clean the car to check for signs of mouse activity and ensure the car's cleanliness; Examine the integrity of the car's air conditioning and ventilation parts, as mice often enter the car through these areas. 2. Maintain cleanliness: Avoid leaving food residues in the car, frequently open windows for ventilation, and ensure doors and windows are closed when leaving the car; Install an electronic rodent repellent in the car to use ultrasonic waves to drive away mice; You can place some rodent-proof bags in hidden locations inside the car; Install rodent-proof nets on parts of the car that are prone to mouse entry; Set up protective barriers around the car.
5
4
Share

Can a Dash Cam Record When the Car is Off?

Generally, the power supply to the dash cam is cut off after the car is turned off, so the dash cam will not operate when the car is not running. Here are the main functions of a dash cam: 1. After installing a dash cam, it can record video and audio of the entire driving process, which can serve as evidence in traffic accidents. 2. For those who enjoy road trips, it can also be used to document the journey through challenging terrains. 3. While driving, it continuously records the journey, capturing time, speed, and location data in the video, functioning much like a "black box." 4. It can also be used at home as a DV camera to record life's moments or serve as a home surveillance device. 5. Additionally, it can be used for parking surveillance. The video footage from the dash cam should not be edited; if altered, it may not be useful in the event of an accident. This also helps prevent unavoidable fraudulent claims in today's society.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.