What are the differences between Volkswagen Lavida and Bora?

1 Answers
JustinLee
07/29/25 11:59pm
Differences between Volkswagen Lavida and Bora: 1. Different body dimensions: The Lavida has a body length of 4605 mm, width of 1765 mm, height of 1460 mm, and a wheelbase of 2610 mm; the Bora has a body length of 4562 mm, width of 1793 mm, height of 1468 mm, and a wheelbase of 2614 mm. In terms of exterior design, the Lavida's front face adopts Volkswagen's family-style horizontal grille design, with four silver chrome grilles appearing very stable. The Bora's front face design is more aggressive, somewhat similar to the design of the new Volkswagen Touareg, looking very sharp. The front face also features an open-eye design, with the headlight shape being more three-dimensional, appearing very aggressive, which is quite different from the traditional design style of Volkswagen sedans.
Was this review help?
5
4
Share
More Forum Discussions

How to Claim Compensation for Abnormal Engine Noise in a New Car?

First, take the car to a 4S dealership for inspection to identify the main cause of the abnormal noise and the reason for its occurrence. After replacing the new part, restart the car to check. If there is no abnormal noise, deliver the car to the customer as scheduled. If the noise persists, continue troubleshooting and resolving the issue. If the problem is not identified or the abnormal noise cannot be resolved after replacing parts, communicate with the manufacturer to discuss a solution before engaging with the customer. Depending on the driving conditions, faults can be eliminated without disassembling components such as the transmission, engine, or body.
11
0
Share

How to Unlock Tesla Doors?

When parked, Tesla offers three methods to unlock the doors: touchscreen unlock, park unlock, and P-gear unlock. While parked, manually tap the lock icon on the touchscreen to unlock all doors. Navigate to 'Vehicle Controls - Locks' and enable 'Unlock on Park' to have the doors automatically unlock when parked, requiring no additional actions. If 'Unlock on Park' is not enabled, press the P-gear to enter park mode, then press the P-gear again to unlock all doors.
16
1
Share

How to Open a Car Fuel Tank Cap?

Usually, there are several ways to open the fuel tank cap: mechanical key opening, in-car switch operation, and direct pressing. You can directly use the key to open the fuel tank cap lock, or some cars have a press-type mechanism, or you can simply lift the cap, but you may need a key to open it from the inside. Generally, in economy cars, the switch is located on the floor to the left of the driver's seat, on the front door panel, or on the dashboard marked with a fuel pump symbol; just open it. With the vehicle unlocked, simply press the fuel tank cap with your hand to open it. Note that the fuel tank cap cannot be opened when the car is locked.
13
4
Share

How to Deal with Rust on the Car Roof?

Use ultra-fine water sandpaper dipped in water to gently sand away the rust spots, completely clean the area, and apply a layer of primer to ensure the rust does not spread or worsen. You can purchase a touch-up paint pen in advance. After the applied primer has dried, sand it smooth with water sandpaper, then use the touch-up paint pen for coloring. Keep a tube of ordinary toothpaste in the car. If you notice small new scratches, apply a little toothpaste. After rain or washing the car, the application can act as a barrier, which is effective in the short term. Periodic inspection and prevention are essential.
20
3
Share

How to Replace the Battery in an XVR Key?

First, pull out the mechanical key by pressing the latch on the back to release it. Locate the clip position of the car key. We need to clean the gaps between the key components until the key is fully opened. After fully opening the car key, use a flathead screwdriver to pry out the old battery that needs to be replaced. Be careful not to damage the surrounding clips during this process. Once the old battery is removed, insert the new battery. Fully reassemble the key by aligning both sides and pressing firmly to close it. Tighten the screws, and finally, insert the key back into its slot.
13
5
Share

How to Inspect a New Car Upon Delivery?

Check the car body surface for any scratches or wear, and ensure the sheet metal is smooth. If there are no issues, it indicates the paintwork hasn't been scratched. Inspect the vehicle identification number on the car's nameplate, paying attention to how long it has been since the manufacturing date and the delivery day. Examine the engine compartment for cleanliness. Enter the car to check for any unusual odors or severe stains inside. Inspect the tires and their production dates. If there are any issues with the tires, you can request a replacement. Start the engine and run the vehicle to check if the engine idles smoothly. Also, observe the steering wheel and seat for any vibrations, and assess the sound insulation inside the car.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.