What are the differences between Vios and Santana after ten years of driving?

Where is the engine number located on a step-through motorcycle?

The engine number of a step-through motorcycle is generally located below the left gear lever and above the footrest. In some cases, it may be stamped on the right side of the engine. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be found through the following 4 ways: The vehicle's driving license contains the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production number of the engine, where each engine can only have one unique engine number, and no two engines share the same number.

19

2

Share

What is the reason why the Lavida's seat belt reminder does not sound?

If the seat belt reminder of the Lavida does not sound, you can check the seat belt socket to see if the sensor in the seat belt socket is damaged. Function of car seat belts: Car seat belts are safety devices designed to restrain occupants during a collision, preventing secondary collisions between occupants and the steering wheel, dashboard, etc., or avoiding injuries or fatalities caused by occupants being thrown out of the vehicle during a collision. Introduction to car seat belts: Car seat belts, also known as seat safety belts, are a type of occupant restraint device. Car seat belts are widely recognized as the most cost-effective and efficient safety device, and their installation is mandatory in many countries as part of vehicle equipment.

12

1

Share

Can the BMW 1 Series use 92 octane gasoline?

BMW officially recommends using 95 octane gasoline for the 1 Series. Below are the reasons for using 95 octane gasoline and guidelines for selecting the appropriate fuel: Reasons for using 95 octane gasoline in the BMW 1 Series: Better combustion value and relatively improved power performance. Guidelines for selecting the appropriate fuel: Choose the gasoline grade as per the car manufacturer's requirements. This not only extends the engine's lifespan but also helps save fuel. Using low-octane fuel in a high-compression-ratio car can cause damage and increase fuel consumption, making it costlier in the long run. Conversely, using high-octane gasoline in a low-compression-ratio car is economically wasteful and can lead to slow ignition, prolonged combustion time, reduced power output, and even damage to the exhaust manifold. It is only scientific to use gasoline that matches the car's compression ratio, which enhances engine power, increases mileage, and saves fuel.

2

3

Share

Where is the fuse box of the Passat B5 located?

Passat B5's fuse box is located on the left side of the driver's seat. Below are the location of the Passat B5's fuse box, steps for replacing fuses, and precautions related to fuses: Location of the Passat B5's fuse box: Located on the left side of the driver's seat, open the cover to see the fuse box. Steps for replacing fuses: Before locating the fuse box, for safety, please turn off the engine and power. Find the corresponding location of the fuse box and carefully pry open the cover with a screwdriver or other tools. Then, on the inside of the cover, you can find the corresponding component fuse based on the information. Use a light or a test pen to conduct a preliminary check on the fuse, and confirm that it has blown before considering replacement. The new fuse should match the old one in size, color, and all parameters. If the component still does not respond after replacing the fuse, take it to a repair shop as soon as possible. Precautions related to fuses: Using fuses of different specifications for installation may cause damage to components or even risk of fire. Do not replace fuses with those exceeding the rated current, as this may cause components to burn out. Do not splice broken fuses. Never use metal strips, paper clips, or similar metals as substitutes for fuses.

13

5

Share

Is it necessary to clean the throttle body?

Throttle body requires regular cleaning for the following reasons: After prolonged use, carbon deposits will accumulate near the air flow valve plate, causing slight sticking and poor rotation of the air flow valve plate. This blocks the reserved idle air intake, leading to sluggish throttle response and unstable idle speed or stalling issues. The benefits of regular throttle body cleaning include: 1. Effectively removing deposits and carbon buildup from the fuel injectors, maintaining fuel system cleanliness; 2. Cleaning the exhaust gas recirculation system, reducing emissions and saving fuel, thereby effectively protecting the oxygen sensor and catalytic converter; 3. Preventing symptoms such as knocking, unstable idle speed, and poor acceleration caused by deposits and carbon buildup.

20

2

Share

Where is the water pump located in the new Jetta?

The water pump in the new Jetta is installed on the rear side of the engine. Below are the location of the water pump in the new Jetta and the repair method for water pump leakage: Location of the water pump in the new Jetta: The Jetta's water pump is installed on the rear side of the engine. Automotive engines widely use centrifugal water pumps. Its basic structure consists of the pump housing, connecting plate or pulley, pump shaft and bearings or integrated shaft bearings, pump impeller, and water seal assembly, among other components, making it a major part of the automobile. Repair method for water pump leakage: Disassembling the water pump: First, drain all the coolant from the water pump, remove the V-belt, use special tools to press out the water pump pulley, and then remove the water pump. Water pump disassembly: Use special tools to first remove the water pump bearings, then detach the water pump impeller and seal assembly from the bearings. Replace the sealing ring, new gasket, new V-belt, and new pulley. Assembly: Use special tools to first press the bearings onto the water pump impeller, then press the impeller and seal assembly into their designated positions. Press the water pump bearings into the pulley seat, ensuring the bearing end face is flush with the housing during operation, and the impeller plane is 0.1-0.3mm below the pump housing plane. Inspection: The assembled water pump should have a shaft that rotates smoothly, and the water pump bearings should have no noticeable radial play. Refill with new coolant.

14

1

Share

What are the differences between Vios and Santana after ten years of driving?

Where is the engine number located on a step-through motorcycle?

What is the reason why the Lavida's seat belt reminder does not sound?

Can the BMW 1 Series use 92 octane gasoline?

Where is the fuse box of the Passat B5 located?

Is it necessary to clean the throttle body?

Where is the water pump located in the new Jetta?

How to reset the tire pressure warning in the TACQUA?

What is the horsepower of the Kawasaki Z650?

Why Won't the Volkswagen T-Roc's Wiper Move?

Is the BMW 5 Series air-cooled or water-cooled?