What are the differences between Toyota Reiz 2.5S and 2.5V?

1 Answers
DeLola
07/29/25 4:06pm
The differences between Toyota Reiz 2.5S and 2.5V are as follows: Different sunroof configurations: 2.5S does not have a sunroof, while 2.5V is equipped with an electronically controlled power sunroof. Additionally, the 2.5V features rear and rear-seat windows with light-tinted privacy glass, xenon headlights (with automatic leveling and headlight washers), aluminum accelerator, brake, and footrest pedals, stainless steel door sills (with vehicle name logo), large roof lighting system, 8-way power-adjustable front seats (driver's seat with power lumbar support), steering wheel with control buttons, cruise control system, and leather seats. Different seat adjustment methods: 2.5S uses manual mechanical adjustment, while 2.5V features electronic power adjustment. Different heating methods: 2.5S uses an air conditioning heating system, while 2.5V is additionally equipped with heated front seats for both the driver and passenger. Different prices: Compared to the 2.5S, the Reiz 2.5V has a higher price and more advanced configurations. The 2013 Reiz 2.5S Jingrui Edition has dimensions of 4750*1795*1450 (L*W*H in mm), a 2.5L 193HP V6 engine, a 4-door 5-seater sedan body, a maximum torque of 236 N·m, and a 6-speed automatic transmission. The 2013 Reiz 2.5V comes in five versions: Shangrui Edition, Navigation Edition, Zunrui Navigation Edition, Jingrui Edition, and Shangrui Navigation Edition. All versions have dimensions of 4750*1795*1450 (L*W*H in mm), a 2.5L 193HP V6 engine, a 4-door 5-seater sedan body, a maximum torque of 236 N·m, and a 6-speed automatic transmission.
Was this review help?
7
0
Share
More Forum Discussions

What is the Chinese equivalent of Euro 4 emission standards?

Euro 4 emission standards are equivalent to China's National 4 emission standards. Below is relevant information about Euro 4 emissions: 1. In terms of emission standards, Euro 4 is similar to China's National 4, but Euro 4 is stricter than National 4. It can be said that Euro 4 is more advanced than National 4. Given current technology, emission standards are unlikely to be upgraded within the next decade or so. Upgrading emission standards must consider not only technology but, more importantly, cost factors. 2. China's National 3 and National 4 emission standards for light-duty vehicles have identical pollutant emission limits to Euro 3 and Euro 4 standards. The Euro IV standard refers to the Euro IV emission standard, which was implemented at the end of 2005 as an important standard for automotive exhaust emissions and is currently enforced in most countries. This standard requires that diesel passenger cars emit no more than 250 milligrams of nitrogen oxides per kilometer; vans and SUVs must not exceed 390 milligrams of nitrogen oxides per kilometer.
6
1
Share

Can I Sell a Second-Hand Car I Just Bought?

You can sell a second-hand car you just bought. Here are some considerations when buying or selling a used car: 1. If you just bought a second-hand car and don't want it anymore, you can sell it immediately as long as the vehicle can be legally transferred and driven on the road. When purchasing a used car, the first step isn't to inspect the car's condition or negotiate the price; it's to check if the vehicle's paperwork is complete, if it can be legally transferred, and if it's road-legal. 2. If the car cannot be legally transferred or driven on the road, it's advisable not to purchase such a vehicle. In the market, there are some cars that cannot be transferred; buying these cars poses significant risks for future use. Generally, cars with incomplete paperwork or those that cannot be transferred are priced very cheaply. When buying a used car, if you're not knowledgeable, you can hire a used car appraiser to accompany you for inspection.
8
0
Share

Which Cars Can Be Flattened for Sleeping?

Cars that can be flattened for sleeping include: SUV types: Volkswagen Tharu, T-Roc, Honda XR-V, Toyota RAV4, Geely Boyue, etc.; Sedan types: Lavida, Bora, Santana, Roewe i5, etc. Taking the Roewe i5 as an example, it is a high-performance internet-connected compact car under the Roewe brand. In terms of appearance, it features a rhythmic floating wing grille design paired with rectangular front headlight clusters. In terms of dimensions, the car measures 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. For power, the Roewe i5 is equipped with a 1.5L naturally aspirated engine and a 1.5T turbocharged engine, with maximum power outputs of 120ps and 169ps respectively, and maximum torque outputs of 150nm and 250nm respectively.
14
5
Share

Method for Replacing the Battery of Baojun Car Key

Here are the specific steps for replacing the battery of a Baojun car key: 1. Locate the plastic button on the head of the car key, pry it open, and then remove the metal mechanical key. 2. Use the metal mechanical key or a flat-head screwdriver to pry open the plastic shell of the car key. 3. Open the plastic shell. 4. Replace the old battery with a new one, and reassemble the key by reversing the disassembly steps. Here is more information about Baojun cars: 1. Baojun is an independent automobile brand created by SAIC-GM-Wuling in 2010. 2. The logo design of the Baojun brand corresponds phonetically and visually with the brand name "Baojun," featuring a "horse head" as the main element of the brand identifier. This design creatively blends traditional Chinese elements with modern composition techniques, fully embodying the brand spirit of "optimism, reliability, and confidence."
2
3
Share

Where is the car air conditioning compressor located?

Location of the car air conditioning compressor: the lower right corner of the engine belt, below the generator. The car air conditioning compressor is installed on the engine, and it is driven by a belt between the compressor and the engine. The specific location of the compressor can be found by locating the belt. Here are some related introductions about the car air conditioning compressor: 1. The car air conditioning compressor is the heart of the car air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. Compressors are divided into two types: fixed displacement and variable displacement. According to different working principles, air conditioning compressors can be divided into fixed displacement compressors and variable displacement compressors. 2. In the entire system, the compressor is responsible for compressing and driving the refrigerant. Driven by the engine, it continuously inhales the low-temperature and low-pressure refrigerant vapor generated by the evaporator's heat absorption and vaporization, compresses it into high-temperature and high-pressure refrigerant vapor, and discharges it to the condenser, creating high-pressure conditions for the refrigerant to continuously condense and release heat in the condenser. At the same time, it overcomes the circulation resistance of the refrigerant in the refrigeration circuit.
18
5
Share

What does the INFO button on a car mean?

INFO button is an information display function key, commonly found on CD players and instrument panels. Pressing the INFO button in a car will display information such as fuel consumption and remaining mileage on the instrument panel. It includes all vehicle information feedback, covering not only fuel consumption and range but also tire pressure, engine oil, electronic system information, and more. Below is a related introduction about car center console: 1. The car center console is where comfort and entertainment devices like air conditioning and audio are controlled. It includes the central control door lock system, allowing the driver to control all door switches and window lift systems. 2. The central control door lock system mainly has three functions: central control, speed control, and individual control. The driver can control all door locks, and when the vehicle reaches a certain speed, the doors automatically lock. Other doors have independent switches for individual control. Most central control switches consist of a master switch and sub-switches, with the master switch installed on the driver's door for locking or unlocking all doors. 3. Sub-switches are installed on other doors for individual control. The central lock actuator executes the driver's commands to lock or unlock the doors. Door lock actuators come in three types: electromagnetic, DC motor, and permanent magnet motor.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.