What are the differences between Toyota Izoa and Toyota C-HR?

1 Answers
RebeccaDella
07/29/25 5:34pm
Differences between Toyota Izoa and C-HR include different manufacturers and lower grille designs. Below are details about these differences. Different Manufacturers: Toyota Izoa is produced by FAW Toyota; C-HR is produced by GAC Toyota. Different Lower Grille Designs: The lower grille of Toyota Izoa features horizontal bars; the lower grille of C-HR has a mesh design. The C-HR measures 4360mm in length, 1795mm in width, and 1555mm in height, with a wheelbase of 2640mm. In terms of power, the C-HR is equipped with Toyota's 2.0L naturally aspirated engine, delivering a maximum power of 171kW, a thermal efficiency of 40%, and a peak torque of 205Nm.
Was this review help?
5
5
Share
More Forum Discussions

What are the effects of a misaligned ETC?

ETC misalignment has little impact as long as it does not obstruct the driver's vision or interfere with the normal detection by toll station equipment. Below are relevant details: 1. ETC: ETC is an Electronic Toll Collection system, where ETC-dedicated lanes are designed for vehicles equipped with ETC onboard units, utilizing electronic tolling methods. 2. Working Principle: The ETC system is currently the most advanced toll collection method for roads and bridges worldwide. It employs microwave-dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, leveraging computer networking technology for backend settlement processing with banks. This enables vehicles to pass through toll stations without stopping while paying the required tolls.
2
2
Share

How to Deal with Rust Spots on a White Car?

The methods to deal with rust spots on a white car are: 1. Use car cleaning clay, also known as detailing clay, which is a non-abrasive material that can remove stubborn stains from the car's surface without damaging the paint. Rub it on the car body until clean; 2. Polishing; 3. Use a touch-up paint pen. Sand the area slightly and apply white touch-up paint to complete the repair. Methods to prevent rust spots on white cars: Wash the car frequently, take protective measures for the paint such as waxing and sealing, coating and crystal coating, and avoid parking under trees. Benefits of coating: 1. Isolates the paint from air exposure; 2. Enhances the glossiness of the car's paint surface; 3. Effectively prevents or reduces minor scratches.
3
0
Share

What are the reasons for the non-functioning tachometer in the BYD F0?

The reasons for the non-functioning tachometer in the BYD F0 are: 1. Issues with the vehicle's wheel speed sensor; 2. Malfunction of the speedometer in the vehicle's instrument cluster; 3. Fault in the vehicle's mileage sensor. Taking the 2015 BYD F0 as an example, it is a microcar with body dimensions of: length 3460mm, width 1618mm, height 1465mm, a wheelbase of 2340mm, a fuel tank capacity of 30 liters, and a curb weight of 870kg. The 2015 BYD F0 features a MacPherson strut front suspension and a torsion beam trailing arm rear suspension. It is equipped with a 1.0L naturally aspirated engine, delivering a maximum horsepower of 68PS, a maximum power of 50kW, and a maximum torque of 90Nm, paired with a 5-speed manual transmission.
10
0
Share

What are the types of NGK spark plugs?

Here are the types of NGK spark plugs: 1. Iridium Alloy Spark Plug: The center electrode is made of iridium alloy, and the outer electrode discharge area also uses platinum alloy, making it a high-performance, long-life spark plug that can suppress electrode wear. 2. High Ignition Iridium Alloy Spark Plug (SPE Type): By adopting a fine-diameter center electrode and a bevel-cut design at the front of the outer electrode, it can concentrate the spark at the front while suppressing quenching effects. Additionally, square platinum alloy particles are welded onto the outer electrode to ensure durability. 5. High Ignition Iridium Alloy Spark Plug (PSPE Type): By shortening the outer electrode, it reduces the coverage effect on the center electrode and minimizes quenching effects, further enhancing ignition performance. It also suppresses overheating of the outer electrode, providing excellent resistance to breakage, making it a high-performance, long-life spark plug capable of stable combustion even in high-compression ratio engines.
1
5
Share

Where is the coolant temperature sensor located on a Honda 2.4 engine?

Honda 2.4 engine's coolant temperature sensor is located on the radiator, positioned below the radiator's electric fan. It is situated next to the transmission cooling pipe. Composition of the coolant temperature sensor: The coolant temperature and level sensor consists of a thermostat section and a water level control section. It is also accompanied by a pressure reduction device in front of the electric valve and a rotary muffler heater for heating. Function of the coolant temperature sensor: The coolant temperature sensor converts the coolant temperature into an electrical signal, which is input to the ECU to: Adjust the fuel injection quantity; increase fuel injection during low temperatures. Adjust the ignition timing; advance the ignition timing during low temperatures and retard it during high temperatures to prevent knocking. Influence the idle control valve; during low temperatures, the ECU controls the idle control valve based on the coolant temperature sensor signal to increase idle speed, affecting the EGR valve.
8
1
Share

Where is the jack rod?

There is a raised ridge under the car's sill, running from front to back. Any position along this ridge can serve as a support point. Below is relevant information: 1. Jack: A jack is a lightweight lifting device that uses a rigid lifting component as its working mechanism to lift heavy objects within a small stroke through a top support seat or bottom support claw. Jacks are primarily used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. They are compact, sturdy, flexible, and reliable, and can be carried and operated by a single person. 2. Classification: Jacks can be categorized by structural features into rack jacks, screw jacks, and hydraulic (oil) jacks. Other classifications include separated jacks, horizontal jacks, claw jacks, synchronous jacks, hydraulic jacks, and electric jacks. Commonly used jacks include screw jacks, hydraulic jacks, and electric jacks.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.