What are the differences between Toyota Alphard and Vellfire?

1 Answers
HaleyAnn
07/30/25 9:50am
Here are the main differences between Toyota Alphard and Vellfire: 1. Lighting system: Vellfire features split-type headlights and taillights, while Alphard has integrated lighting units. 2. Badging: Vellfire uses Toyota's standard bullhead emblem, whereas Alphard carries a unique special badge. 3. Interior color scheme: Vellfire's cabin primarily features black tones, while Alphard offers beige interior for a warmer ambiance. 4. Configuration: Alphard includes two additional features - power trunk position memory and headlight delay-off function, while Vellfire offers two exclusive features - full vehicle keyless entry and rear-seat multimedia controls.
Was this review help?
13
2
Share
More Forum Discussions

Is the Eclipse Blue car color eye-catching?

Eclipse Blue colored cars are quite eye-catching, and Eclipse Blue is a car color offered by many automobile manufacturers. Here is some information about car colors: 1. Car color falls within the scope of automotive design. From an aesthetic perspective, only the right car color can better highlight the vehicle's styling design. Only in this way can the characteristics of the car be better expressed. The body color is also part of the car designer's creation. 2. People's perception of color is often influenced by surrounding colors. Car color plays a significant role in determining a vehicle's sales performance.
13
2
Share

Where are the Civic door drain holes located?

Civic door drain holes are located at the lower part of the door panel, with at least two on each door. Here is an introduction to car drain holes: 1. Sunroof drain hole: Due to its position, the sunroof drain hole is prone to blockage by leaves and other debris. If blocked, rainwater can seep through the edges of the sunroof into the car, potentially wetting the roof trim or even causing severe water accumulation inside the cabin. 2. Door drain hole: Door drain holes are usually located at the lower part of the door panel, with at least two on each door. Because of their low position, vehicles frequently driven on muddy roads may find these holes clogged with mud over time. 3. Trunk drain hole: Under normal circumstances, the trunk does not easily accumulate water. However, in extreme situations like vehicle submersion, the trunk drain hole may need to be manually opened to drain water. Depending on the vehicle, there are usually 1-2 trunk drain holes, located inside the spare tire well. 4. Fuel tank cap drain hole: Most fuel tank openings face upward, making the lower part prone to water accumulation. To prevent this, a "drain" is installed at the bottom. If this drain hole is blocked, water can accumulate during rain, posing a risk to metal components like the fuel tank cap and door panels. Therefore, this area also requires regular inspection and cleaning.
14
2
Share

What is the best oil model for Verna?

Verna is best suited with 5W20 oil. When adding oil, the amount needed should be determined based on the markings on the dipstick. Verna engines are equipped with an oil dipstick, which typically has two markings: one indicating the maximum oil level and the other the minimum oil level. The optimal oil level is between these two marks. Here are some details about oil models: 1. Oil models consist of two parts: classification and viscosity specification. The oil model usually indicates viscosity and quality. The viscosity of lubricating oil is often identified using SAE grades, where SAE stands for the Society of Automotive Engineers. 2. On the outer packaging of oil, you will often see SAE and API. SAE is the abbreviation for the Society of Automotive Engineers, and API stands for the American Petroleum Institute. The number following SAE indicates the oil's viscosity, while the number following API indicates the oil's quality grade.
16
4
Share

How to Deal with Frost on the Car Windshield?

Here are the methods to handle frost on the car windshield: 1. Frost on the windshield in winter is a normal occurrence. In such cases, you can soak a towel in warm water and wipe the windshield. After wiping the glass with the towel, make sure to dry the water on the glass thoroughly; otherwise, frost may form again. 2. Alternatively, after getting into the car, you can turn on the warm air from the air conditioner to raise the interior temperature and melt the frost on the glass. 3. To prevent frost, you can cover the windshield with a blanket when parking at night. It is also recommended to lift the windshield wipers when parking in winter nights to prevent them from freezing to the glass.
18
4
Share

How to set up auto-lock for the 10th generation Accord?

To set up the auto-lock feature for the 10th generation Accord, you need to visit a 4S shop to have the program updated. Here is some information about the auto-lock function: 1. The auto-lock function is a very practical feature. It automatically locks the car doors when the vehicle is in motion, preventing passengers from accidentally opening the doors and offering protection against door-pulling theft during traffic jams or at red lights, thereby enhancing safety. 2. The 10th generation Accord is equipped with either a 1.5-liter turbocharged engine or a 2.0-liter naturally aspirated engine. Models with the 1.5-liter turbocharged engine use a CVT transmission, while those with the 2.0-liter naturally aspirated engine use an eCVT transmission.
17
4
Share

How many liters of transmission oil can be added to the Volkswagen Magotan?

The Volkswagen Magotan can be filled with 6 liters of transmission oil. Generally, the replacement interval for transmission oil depends on the driver's proficiency in vehicle operation, the road conditions the vehicle frequently encounters, and the mileage covered over a certain period. Transmission oil is a lubricant that keeps the gear system clean, ensuring the transmission operates normally and prolonging the lifespan of the transmission components. The methods for replacing transmission oil are as follows: 1. Traditional gravity drain method, which works similarly to changing engine oil—by loosening the transmission drain plug to release the old oil and then refilling with new oil. 2. Using a circulation machine to replace automatic transmission oil, mainly utilizing the machine's pressure to dynamically replace the oil in the torque converter's lubrication lines and cooling lines.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.