What are the differences between the XPeng P7 480G and 480N?

How often should a car be polished and waxed?

There is no fixed cycle for car body polishing. The purpose of polishing is to better protect the car paint. Below is some relevant information about car polishing: 1. Car detailing: Car polishing is part of the car detailing process. Before waxing, sealing, or coating, the car should be polished first. This is because sealing and coating require prior polishing, and only a finely polished car can achieve a mirror-like finish. This is a necessary step for sealing. 2. Advantages: Polishing itself does not harm the car paint; on the contrary, it helps to better protect the paint. It can remove oxidized paint and various foreign substances on the car body, eliminate fine scratches on the paint surface, and treat minor damages and stains on the car paint.

10

5

Share

How Long Does It Take to Settle a Total Loss Claim for a Car?

The time it takes to settle a total loss claim depends on the insurance company, as different companies have varying contract terms regarding payout timelines. For faster companies, it may take within a month, while slower ones may take up to three months. Below are some important considerations when purchasing insurance for a new car: 1. Choosing an Insurance Company: If you are selecting car insurance on your own, the first step is to find a suitable insurance provider. Be cautious with smaller insurance companies, especially those that are not well-known. This is because filing claims with them can be difficult and time-consuming, particularly if they have limited service networks nationwide, which may cause significant delays in processing claims. 2. Selecting Insurance Coverage: When insuring a new car, choosing the right coverage is crucial. The first essential coverage is comprehensive insurance, which offers great value for money and covers minor damages like scratches and dents. Next is third-party liability insurance, which serves as a good supplement to compulsory traffic insurance—it costs slightly more but provides much better coverage. Additionally, if you don’t have a garage or a fixed parking spot, theft insurance is recommended. Other optional coverages can be selected based on your specific needs. 3. Points to Note Regarding Purchasing Methods: Nowadays, the most common ways to buy car insurance are through phone or online platforms. Both methods are significantly cheaper than traditional insurance purchases and are very convenient, allowing you to complete the process from home. You can also call the official hotline of PICC for inquiries.

9

1

Share

How far should the vehicle warning sign be placed from the car?

On regular roads, in the event of a breakdown or traffic accident, the triangular warning sign should be placed 50 to 100 meters behind the vehicle. On highways, the warning sign must be placed at least 150 meters behind the car, and in rainy or foggy conditions, this distance should be increased to 200 meters. Here is some relevant information about the triangular warning sign: 1. Definition: The triangular warning sign, also known as the triangle warning sign, is a passive reflector made of plastic reflective material. 2. Function: When a driver stops for emergency repairs due to a sudden breakdown or is involved in an accident, the reflective properties of the triangular warning sign can alert other vehicles to take evasive action, thereby preventing secondary accidents.

15

3

Share

What is the bottom light in the taillight?

The bottom light in the car taillight is the reverse light and fog light. Generally, the right side is the reverse light, and the left side is the fog light. Car fog lights are used to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are usually bright yellow, while rear fog lights are red. The symbol for the rear fog light is slightly different from the front fog light—the front fog light symbol has downward light lines, while the rear fog light symbol has parallel lines. It is generally located on the dashboard inside the car. The reverse light is used to illuminate the road behind the car when reversing, serving as a warning to vehicles and pedestrians behind. Based on the materials used, reverse lights can be divided into gas car reverse lights and LED car reverse lights. Gas car reverse lights use halogen materials. Halogen reverse lights are technologically mature and low-cost. LED car reverse lights use LED materials, which are pollution-free, radiation-free, and have a long service life.

12

0

Share

What is the seat height of the CFMOTO 250?

The seat height of the CFMOTO 250SR is 78cm. Below are the detailed specifications of the CFMOTO 250SR: 1. Exterior: The front section is notably sharp, exuding a strong sporty vibe. The sleek and elegant side lines run through the body, making the CFMOTO 250SR exceptionally attractive. The rear design is well-structured, with symmetrical and harmonious taillights that enhance the overall sense of depth. The taillight emits a mysterious aura, profound and distant. The TFT instrument panel is excellent, displaying clearly even under midday sunlight. The addition of mirrors enhances the front's texture, and special decorative strips highlight the rear, emphasizing the premium status of the CFMOTO 250SR. 2. Performance: The CFMOTO 250SR has a displacement of 249cc, powered by a single-cylinder, liquid-cooled engine equipped with an electronic fuel injection system.

7

2

Share

Why are the headlights always on?

It may be because the always-on mode is selected, just turn off this mode. Here are the maintenance precautions for headlights: 1. Remove dirt: If the car's lamp cover and lamp are intact, but the lamp cover surface has problems such as yellowing, cracking, blurring, scratches, etc., you can first use a cleaning agent to remove oil stains, sweat stains, wax and other impurities on the surface and around the headlight, trying to wipe as large an area as possible without missing any details or dirt. During the wiping process, use a clean dust cloth for secondary cleaning, which has the effect of removing oil, wax and preventing static electricity. 2. Prevent yellowing: Since soapy water is an alkaline substance but does not cause corrosion, it can solve the problem of headlight yellowing. Soapy water only plays a cleaning role. To make the headlights brighter, polishing wax is also needed.

11

2

Share

What are the differences between the XPeng P7 480G and 480N?

How often should a car be polished and waxed?

How Long Does It Take to Settle a Total Loss Claim for a Car?

How far should the vehicle warning sign be placed from the car?

What is the bottom light in the taillight?

What is the seat height of the CFMOTO 250?

Why are the headlights always on?

Will Cockroaches in the Car Leave on Their Own?

What are the conditions for overtaking?

Can the car door be opened in water?

How Long Does It Take to Repair a Flooded Car?