···
Log in / Register

What are the differences between the Xingyue L and the Volvo XC60?

1 Answers
Norah
07/28/2025, 02:40 AM

Here are the differences between the Xingyue L and the Volvo XC60: 1. Exterior: The Xingyue L has distinct differences in appearance compared to the Volvo XC60, featuring the latest design language, which is quite similar to the Xingrui. The new car adopts a polygonal front grille paired with a vertical waterfall-style mesh, creating a sense of dimensionality. 2. Design: The side profile of the Xingyue L still shows noticeable differences from the Volvo XC60. The new car features a continuous waistline design combined with slightly protruding front and rear fenders, creating a wide-body effect. Below is additional information about Volvo: 1. Founders: The founders of Volvo Cars are Gustaf Larson and Assar Gabrielsson. These two borrowed a factory in Gothenburg to assemble prototype cars and received authorization on August 10, 1926, officially starting mass production of new cars. 2. First Model: Volvo's first model was the Volvo ÖV4 convertible, which was launched in April 1927. 3. Independence from Parent Company: Volvo Cars officially separated from its parent company SKF in 1935 and began independent operations. Until 1998, it remained under the ownership of Volvo Corporation. 4. Acquisition: In 2010, China's Zhejiang Geely Holding Group acquired Volvo's car business and established vehicle manufacturing plants in Chengdu and Chongqing.

Was this review help?
13
3
Share
More Forum Discussions

What is the principle of automatic parking?

Automatic parking works as follows: 1. When temporarily parked and needing to restart shortly, the parking is completed by the ESP-controlled braking system. The computer uses a series of sensors to measure the vehicle's levelness and wheel torque, determines any tendency for the vehicle to roll, and applies appropriate braking force to keep the vehicle stationary; 2. The braking force is sufficient to prevent movement without being excessive, ensuring no severe lurch forward when pressing the accelerator again; 3. If temporary parking exceeds a certain time limit, the braking system switches to mechanical rear-wheel parking, replacing the previous four-wheel hydraulic braking. When the vehicle is about to move, the electronic system detects the accelerator pedal pressure and, for manual transmission models, the clutch pedal travel to determine whether to release the brakes.
12
0
Share

How to Turn Off the Air Conditioning in a Volkswagen Passat?

Volkswagen Passat's method to turn off the air conditioning depends on the type of air conditioning system: 1. Manual air conditioning: After turning on the fan, press the AC switch and adjust the temperature to a suitable position; 2. Automatic air conditioning: Press the AUTO button for the air conditioning to work automatically, then turn on the fan, press the AC switch, and adjust the temperature to a suitable position. The Volkswagen Passat is a mid-size car under SAIC Volkswagen. Taking the 2020 Volkswagen Passat modified business version as an example, its body dimensions are: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 68.5l, and trunk capacity 521l.
16
0
Share

What does automotive assembly mean?

Automotive assembly refers to a component of a vehicle that is assembled from several parts, components, sub-assemblies, or accessories and has an independent function, such as the engine, transmission, steering gear, front axle, rear axle, body, frame, and cab. In the manufacturing, assembly, or maintenance of automobiles, each assembly is treated as an independent structural unit for production organization. Some major automotive assemblies undergo performance tests according to specific technical specifications before being installed in the vehicle. In automotive repair, the assembly replacement method is often used, where a particular assembly is removed from the vehicle and replaced with a new or repaired and tested assembly. This approach reduces the downtime of the vehicle in the repair shop and improves the organization of repair operations and the quality of the work.
18
2
Share

Which gear should a manual transmission car use when climbing a slope?

Manual transmission cars should use different gears for climbing slopes depending on the situation: 1. For high-displacement vehicles, use 2nd gear for slopes around 15 degrees; 2. For steep slopes greater than 30 degrees, use 3rd gear; 3. For slopes exceeding 45 degrees, use 1st gear to provide greater torque to the vehicle; 4. When climbing viaducts, use 4th or 5th gear. The gears of a manual transmission car are as follows: 1. 1st gear is the starting gear, used for vehicle takeoff; 2. 2nd gear is the passing gear, used for navigating complex road surfaces and handling difficult situations; 3. 3rd gear is the transition gear, used for low-speed driving in urban areas; 4. 4th gear is the driving gear, used for prolonged high-speed driving; 5. 5th gear is the high-speed gear, used for long-distance highway driving.
2
1
Share

What is the Difference Between Standard and High-end Car Configurations?

Automotive standard and high-end configurations mainly differ in additional equipment: standard car configurations are equipped with normal electric controls such as power windows, power steering, and air conditioning; high-end configurations have higher specifications, including panoramic sunroofs, cruise control, power-closing doors, and ABS anti-lock braking systems, in addition to the basic standard configurations. Other types of car configurations include: 1. Low-end configurations: meet basic needs with simple setups, lacking auxiliary functions; 2. Mid-range configurations: more comprehensive auxiliary functions, adding features like leather seats, power seats, and navigation on top of the standard configuration.
10
3
Share

Does Windshield Washer Fluid Have an Expiration Date?

Windshield washer fluid does have an expiration date, which varies by brand, typically around 2 to 3 years. Windshield washer fluids are categorized into: regular windshield washer fluid, anti-freeze windshield washer fluid, and special anti-freeze windshield washer fluid. The method for adding windshield washer fluid is as follows: 1. Open the front hood; 2. Open the windshield washer fluid filler port; 3. Fill the windshield washer fluid up to the marked line. The performance and characteristics of windshield washer fluid include: 1. Cleaning performance: Composed of various surfactants and additives, surfactants have wetting, penetrating, and solubilizing functions; 2. Anti-freeze performance: Significantly lowers the freezing point of the liquid; 3. Anti-fog performance: Forms a single-molecule protective layer on the glass surface.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.