···
Log in / Register

What are the differences between the VV5 and VV6?

4 Answers
VonRiver
07/29/25 12:24pm

The differences between the VV5 and VV6 lie in their body dimensions: the VV5 measures 4462mm in length, 1857mm in width, and 1638mm in height, with a wheelbase of 2680mm; the VV6 measures 4625mm in length, 1860mm in width, and 1720mm in height, also with a wheelbase of 2680mm. In terms of power, the VV6 is equipped with a 2.0T turbocharged engine, delivering a maximum output of 197 horsepower and a peak torque of 355 Nm, paired with a 7-speed wet dual-clutch transmission. For the interior, the VV6 continues the consistent style of the WEY family, but opts for a beige and black two-tone color scheme, and the steering wheel abandons the more sporty flat-bottom design.

Was this review help?
10
4
Share
LeilaRose
08/13/25 11:27pm

From the perspective of a young car enthusiast, the differences between the VV5 and VV6 mainly lie in size and design details. The VV6 is larger than the VV5, offering more spacious interior room, especially in the rear seats and trunk, which can accommodate more luggage or bulky items. In terms of driving, both cars are equipped with a 2.0T engine, but the VV6's suspension tuning leans more toward comfort, reducing bumps during long-distance drives. Exterior-wise, the VV6 features a sharper front grille, more modern wheel designs, and slightly more premium interior materials. To me, the VV6 feels like an enhanced version of the VV5, better suited for weekend trips or cruising with friends. If it's just for city commuting, the VV5 offers better value for money. During regular maintenance, note that the size difference might affect parking flexibility, but overall, the driving experience is quite good.

Was this review help?
6
0
Share
Expand All
DeColton
10/09/25 3:33am

From a housewife's perspective, the size difference between the VV5 and VV6 is quite noticeable. The VV6 offers more interior space, making it easier to install child seats or stack strollers. When going out with kids, the VV6's trunk can hold more shopping bags, and its seats are softer, ensuring family members don't get tired easily. In terms of safety features, the VV6 comes standard with blind-spot monitoring and automatic braking, providing more peace of mind during traffic jams. However, it is a bit more expensive, while the VV5 is perfectly sufficient for daily grocery runs. Both cars are practical, with quick air conditioning in summer and heated seats in winter, but the choice depends on daily needs. For long-term considerations, the larger space of the VV6 better accommodates growing children.

Was this review help?
11
3
Share
Expand All
SanVivienne
11/22/25 4:49am

From a cost-conscious buyer's perspective, the biggest differences between the VV5 and VV6 are price and features. The VV6 has a higher starting price but includes more standard equipment like upgraded navigation and rear air vents. Fuel consumption is similar, around 10L/100km in city driving, but insurance and maintenance costs are slightly higher for the VV6. If you're on a tight budget, the VV5 can save you 20,000-30,000 yuan while offering all essential functions with no noticeable driving difference. In the long run, the VV6's minor upgrades aren't worth the extra money unless you need more cargo space. When comparing, your wallet's thickness is the most practical consideration.

Was this review help?
20
4
Share
Expand All
More Forum Discussions

What is the process for obtaining temporary license plates for a new car?

For new cars, temporary license plates can be directly processed by the 4S store staff. Since the comprehensive implementation of the 'simplification of administration and decentralization' policy, there is no longer a need to go to the vehicle management office to apply for temporary plates when buying a car. The procedures can be completed directly at the 4S store, and temporary license plates can be obtained, with minimal personal involvement in the process. Here is additional information: 1. Validity Period: Temporary license plates have three validity periods depending on the type: 15 days, 30 days, and 90 days. For temporary driving within the administrative jurisdiction, a temporary license plate with a validity period of no more than 15 days is issued; for temporary driving across administrative jurisdictions, a temporary license plate with a validity period of no more than 30 days is issued. For vehicles undergoing research, type testing, etc., a temporary license plate with a validity period of 90 days is issued. 2. Driving Range: Generally, temporary license plates can be used on highways, but there are certain restrictions. There are two types of temporary license plates: one is only for driving within the city (blue background with black characters and black borders), and the other is for driving nationwide (brown-yellow background with black characters and black borders).
12
2
Share

Why Does the Transfer Case Make Abnormal Noises?

Abnormal noises from the transfer case could be caused by the aging of "transfer case oil." The primary functions of the oil are lubrication and heat dissipation. Prolonged use can lead to a decline in oil performance and an increase in impurities, resulting in jerking and abnormal noises. Below is relevant information about the transfer case: 1. Introduction: The transfer case is a device that distributes the engine's power, directing it to the rear axle or simultaneously to both the front and rear axles. 2. Development Trends: The transfer case is essentially a component in four-wheel-drive vehicles. With advancements in four-wheel-drive technology, the transfer case has continuously evolved, forming distinct styles to match different four-wheel-drive vehicle requirements. Their basic principles and functions also vary significantly.
3
1
Share

How much water exposure affects a car?

Normally, if water reaches halfway up the car's tires or the height of the exhaust pipe, it is likely to affect the vehicle. If the water level exceeds this point, it is recommended not to continue driving. Specific details are as follows: Typically, the exhaust outlet of a standard sedan is 20 to 30 cm from the ground, while for SUV models, it is 30 to 40 cm. However, there are exceptions, such as vehicles equipped with a snorkel, which significantly increases the wading depth. Relevant information is as follows: If a car stalls in water, never attempt to restart it. As long as there is no restart attempt, the engine will generally not suffer irreversible damage, and the main task afterward is to drain any water inside the engine. However, if damage occurs due to restarting, it is considered the owner's fault, and insurance companies will not cover the costs.
11
4
Share

Does it matter if the plastic under the radiator frame is broken?

The plastic under the radiator frame breaking does matter. Because this part supports the radiator, its damage may lead to radiator failure and cause unnecessary losses. The radiator frame is essentially a large bracket fixed to the frontmost part of the two front beams, supporting components such as the radiator, condenser, and headlights. It also secures the front part of the hood lock at its top and connects to the bumper. Given the radiator frame's size, small cracks may not affect its functionality. Below are specific symptoms of a car running without water: 1. Rise in cylinder temperature: If the radiator is empty or lacks sufficient water, the temperature inside the cylinder will rise rapidly. 2. Damage to the car: Continuing to drive under high load without dissipating excess heat can weaken the strength of components like the piston, piston rings, and connecting rods, potentially causing deformation. This can prevent them from bearing normal loads and disrupt the normal gaps between parts, leading to a failure in maintaining proper oil films. Ultimately, the engine's internal components may be damaged due to overheating.
12
0
Share

What is the actual fuel consumption of the Ford Edge?

The fuel consumption of the Ford Edge ranges from 8.1L to 8.6L per 100 kilometers. The methods for determining fuel consumption and the influencing factors are as follows: Methods for determining car fuel consumption: Fuel consumption ÷ kilometers driven × 100 = L/100KM. The numbers before 1.6T and 1.8T represent the engine displacement, which is the sum of the volumes of all cylinders. Larger displacement generally means higher power and higher fuel consumption. Factors affecting car fuel consumption: The amount of fuel a car consumes is not only related to the car itself but also to the driver's habits and road conditions. If driving habits are poor and the car is frequently driven on congested roads, the fuel consumption will inevitably be relatively high.
4
0
Share

Where to Go for Car Seat Foam Replacement?

Car seat foam replacement can be done at 4S shops or regular repair shops. Below is relevant information about car seats: 1. Lifespan: If no special accidents occur, fabric car seat covers should be removed and cleaned every six months, while leather seat covers require regular wiping. When cleaning, be sure not to use acidic liquids, as leather seat covers undergo chemical treatment, and acidic cleaners may affect the seat's lifespan. 2. Seat Types: Car seats can be categorized by shape into split seats and bench seats; by function into fixed, removable, and adjustable seats; and by passenger capacity into single, double, and multi-passenger seats. Based on performance, seats have evolved from the earliest fixed types to multifunctional power-adjustable seats, including air-cushion seats, electric seats, stereo sound seats, fatigue-recovery seats, and even electronically adjustable seats. By material, they are divided into leather seats and fabric seats. There are also special-purpose seats, such as child seats and racing seats.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.