What are the differences between the Trumpchi GS7 and GS8?

1 Answers
VonZane
07/28/25 11:17pm
The differences between the Trumpchi GS7 and GS8 are: 1. Different engines: The Trumpchi GS7 is equipped with a total of three engines; the GS8 is equipped with two engines. 2. Different body suspensions: The front and rear suspensions of the Trumpchi GS7 both use MacPherson independent suspensions; the front suspension of the GS8 uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. 3. Different body dimensions: The length, width, and height of the Trumpchi GS7 are 4730mm, 1910mm, and 1770mm respectively, with a wheelbase of 2720mm; the length, width, and height of the GS8 are 4810mm, 1910mm, and 1770mm respectively, with a wheelbase of 2800mm.
Was this review help?
19
2
Share
More Forum Discussions

What are the differences between Volkswagen ID.6X and ID.6 CROZZ?

Volkswagen ID.6X and ID.6 CROZZ have the following differences: 1. Brand difference: ID.6X is an SUV model under SAIC Volkswagen, while ID.6 CROZZ is an SUV model under FAW-Volkswagen. Both models are positioned as large 7-seater intelligent pure electric SUVs and come from the same parent company, both being brands under the Volkswagen Group; 2. Appearance difference: ID.6X and ID.6 CROZZ feature a floating light folding body contour with rounded body line designs; ID.6X is more understated in detail treatment, and while the overall vehicle is not as exaggerated as ID.6 CROZZ, it does not lose its sense of refinement; ID.6X has a richer layered design at the rear, with horizontal lines that visually widen the vehicle, and a luminous logo in the middle of the full-width taillight, giving it a very dynamic appearance;
16
1
Share

What is the minimum speed limit for a two-lane road with a maximum of 120?

For a two-lane road, the speed limit is 120 km/h maximum and 60 km/h minimum: 1. Highways should indicate the speed limit for each lane. The maximum speed must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h. 2. On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h. 3. For roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h. For roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. If the speed limit indicated by road signs differs from the above regulations, drivers should follow the speed limit indicated by the road signs.
4
3
Share

What Causes a Car to Park Too Far to the Right in Parallel Parking?

During the parallel parking test, parking too close to the right side is usually due to turning the steering wheel too late. If the driver turns the wheel too late in the final stage of parking, the right side of the vehicle may cross the solid line, resulting in a failed test. Below are the detailed requirements for parallel parking: 1. Operation Requirements: The driver must maneuver the vehicle into the right parking space without the wheels touching the lane boundary or the parking space boundary. 2. Test Criteria: (1) If the vehicle's body crosses the line after coming to a stop in the parking space, 100 points will be deducted. (2) If the wheels touch the lane boundary during the maneuver, 10 points will be deducted. (3) Failing to park within the designated space results in a deduction of 100 points. (4) Not activating the left turn signal when starting deducts 10 points. (5) Stopping midway deducts 100 points.
16
2
Share

What is the working principle of a brake proportioning valve?

Brake proportioning valve is a valve that distributes braking force to the four wheels. During vehicle braking, the state where the wheels stop rotating and slide on the ground is called lock-up. If the rear wheels lock up before the front wheels, it can cause fishtailing or even dangerous spin-outs. The brake proportioning valve can regulate the brake fluid based on the vehicle load and road resistance conditions within a very short time, ensuring that the braking force applied to the front and rear brake pads approaches the ideal curve. This helps to some extent in preventing skidding and wheel lock-up, reducing braking distance, and enhancing braking effectiveness. Additional information: When the brake proportioning valve malfunctions, braking effectiveness decreases, braking distance increases, and during emergency braking, the rear wheels will lock up first, causing the rear of the vehicle to become unstable or even leading to rollovers.
9
4
Share

What kind of grease is used for brake guide pins?

Brake guide pins typically use calcium-based grease (butter) with certain water resistance. Since the guide pins are exposed, and vehicles often drive through water during rainy seasons, calcium-based grease has water resistance that prevents it from being washed away, ensuring the braking system functions properly. Engine oil is strictly prohibited for brake caliper guide pins because it can easily be washed away by water, leading to loss of lubrication and potential seizing of the guide pins, resulting in brake failure. Here is more information about brake guide pins: 1. Maintenance: Brake system maintenance helps prevent high temperatures, rust, corrosion, and ensures lubrication. 2. Consequences of abnormal brake guide pins: (1) If the guide pins of the brake caliper are poorly lubricated or stuck, abnormal braking may occur, leading to ineffective braking or dragging brakes. (2) If the guide plates at both ends of the brake pads oxidize or rust, it will affect the sliding movement of the brake pads.
3
5
Share

Where is the engine number located on an Isuzu pickup truck?

The engine number of an Isuzu pickup truck is located above the engine oil filter on the cylinder block, typically consisting of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license will have the engine number printed, usually located on the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, with each engine having a unique number that cannot be duplicated.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.