What are the differences between the Tiguan L and Audi Q5?

2 Answers
VanLeila
07/29/25 7:06am
The differences between the Tiguan L and Audi Q5 are as follows: 1. Engine: Both the Audi Q5L and Tiguan L use the Volkswagen EA888 series 2.0T engine, but the engine in the Audi Q5L is more advanced. The Audi Q5L is equipped with the EA888-DKW engine, which has a maximum torque of 370Nm, making it the most powerful engine in the Volkswagen EA888 series, with performance tuned to its optimal state. In contrast, the Volkswagen 2.0T engine uses the commonly referred to EA888-DKX engine, whose parameters are slightly lower than those of the Audi Q5L. 2. Vehicle Space: The Audi Q5L is comparable to a mid-to-large SUV, with dimensions of 4765*1893*1659mm and a wheelbase of 2908mm. On the other hand, the Volkswagen Tiguan L has dimensions of only 4716*1859*1677mm and a wheelbase of 2791mm.
Was this review help?
6
4
Share
SanAdelyn
08/12/25 10:27am
As an average family user, I feel the most noticeable differences between the Touareg L and Audi Q5 lie in price and value. The Touareg L starts at just over 200,000 yuan, which is economical and affordable, with lower maintenance costs, making it suitable for someone like me with a limited budget who just wants a reliable family SUV. The Audi Q5 starts at over 400,000 yuan, more than double the price, with higher maintenance costs, but it offers stronger brand prestige, a more luxurious feel, and better resale value. In terms of performance, the base Touareg L might be more fuel-efficient, making it ideal for city commuting, while the Audi has more responsive power. In terms of space, the Touareg L is slightly larger, offering more practical storage for family use. Overall, if daily use is the priority, the Touareg L offers the best value for money; if you're after prestige or driving pleasure, then the Audi is worth considering. The difference in fuel consumption is also worth noting, as the Touareg L is typically more economical in urban environments.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What are the causes of insufficient compression in cylinder two?

The causes of insufficient compression in cylinder two are: 1. Severe wear of piston rings, resulting in reduced sealing effectiveness; 2. Scratches or abnormal wear on the cylinder wall; 3. Poor sealing of the valve seat or spark plug seat; 4. Damage to the cylinder gasket. The solutions for insufficient compression in cylinder two are: 1. Replace the valve oil seal; 2. Replace the piston and piston rings; 3. Install a cylinder liner; 4. Replace the valve spring; 5. Replace the cylinder head gasket. The symptoms of insufficient compression in cylinder two are: 1. Excessive smoke escaping from the oil filler opening in the crankcase; 2. Lubricating oil in the oil pan becomes dirty and overheats easily; 3. Noticeable decrease in engine power while driving.
20
5
Share

Does the ix35 comply with China VI emission standards?

ix35 complies with China VI emission standards, which regulate the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from vehicle exhaust. The ix35 is a compact SUV with body dimensions of 4500mm in length, 1850mm in width, and 1715mm in height, a wheelbase of 2640mm, and a fuel tank capacity of 58 liters. The ix35 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 103kW at 6000rpm and a maximum torque of 242Nm, paired with a 7-speed dual-clutch transmission.
2
2
Share

What Causes the Car Malfunction Light to Illuminate?

Car malfunction light illuminates due to: 1. Sensor issues: When the water temperature, crankshaft position, air flow, intake temperature, or oxygen sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data; 2. Maintenance problems: Irregular maintenance and poor driving habits can increase the engine's operational burden; 3. Fuel quality issues: The fuel added to the car has a specific grade, and failure to add as required can cause engine wear; 4. Poor mixture combustion: This can lead to engine carbon buildup or knocking issues, which are monitored by the engine's oxygen sensor; 5. False faults: Occur due to bumps during driving, tampering with certain engine connectors, or temporary ECU signal interruptions.
17
4
Share

How to Adjust the Front and Rear Seats in a Passat?

The method to adjust the front and rear seats in a Passat is: 1. Push the small module on the side of the seat to adjust it forward or backward; 2. Lift the handle on the side of the seat to adjust it forward or backward. The Passat is a mid-size car with body dimensions of: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, and a fuel tank capacity of 68.5 liters. The Passat is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW, maximum power speed of 5000rpm, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
1
5
Share

What are the high-voltage components of an electric vehicle?

Electric vehicle high-voltage components include: power battery, drive motor, high-voltage distribution box, electric compressor, DC, OBC, PTC, and high-voltage wiring harness. An electric vehicle refers to a vehicle powered by an on-board power source and driven by an electric motor to propel the wheels. It can be categorized into: 1. Pure electric vehicles, which are powered solely by an electric motor; 2. Fuel cell vehicles, which use fuel cells as the power source; 3. Hybrid vehicles, which derive power from a combination of an electric motor and an internal combustion engine, either simultaneously or individually. The characteristics of electric vehicles are: 1. Pollution-free and low noise; 2. High energy efficiency; 3. Simple structure and easy maintenance.
6
2
Share

Where is the Power Window Fuse Located?

The power window fuse is located on the left side of the driver's seat. You can replace the window fuse by prying open the panel on the left side of the driver's seat. The method for operating the power window is: 1. Press and hold the switch, then release the button when the window lowers to the desired position; 2. Lift the switch, then release the button when the window rises to the desired position. The car window is an essential component of the vehicle body. It operates by using the vehicle's power supply to drive the window regulator motor, which moves the regulator up and down, thereby raising or lowering the window glass to achieve automatic opening and closing. The functions of the car window include meeting the needs for interior lighting, ventilation, and providing visibility for the driver and passengers.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.