What are the differences between the Tiguan and Tiguan L?

What is the displacement of the N55 engine?

The displacement of the N55 engine is 3.0 liters, making it a 3.0-liter inline six-cylinder turbocharged engine with relatively strong power. Components of the N55 engine: The N55 engine housing consists of the engine block, cylinder head, cylinder head cover, oil pan, and seals. The block is made of die-cast aluminum alloy, comprising the crankcase and baseplate. Advantages of the N55 engine: The cylinder head of the N55 engine is a newly developed product. For the first time in a BMW six-cylinder engine, it incorporates direct injection, an exhaust turbocharging system, and Valvetronic. The cylinder head has a compact structure and is equipped with the third-generation Valvetronic. The combination of the exhaust turbocharger, Valvetronic, and direct injection system is referred to as Turbocharged Valvetronic Direct Injection, reducing CO2 emissions or fuel consumption by 3-6 percentage points. Models equipped with the N55 engine: The N55 engine is used in various BMW models such as the 135i, 335i, 535i, 640i, 740i, and Z4. This engine has also been introduced into the domestic market and can be found in imported 335i and domestically produced 535i models currently available in the Chinese market.

18

4

Share

What is Cold Running-in for New Cars?

New car cold running-in refers to the process where engine components' friction surfaces transition from their initial manufactured state to operational condition before the engine reaches normal working temperature. After running-in, these parts' surfaces become smoother, contact areas between components increase, and fits become tighter, preventing localized overheating and seizure under extreme conditions. Cold running-in procedures: Before driving: Pre-warm the cold engine. Newly manufactured vehicles require proper warm-up as components still have initial wear surfaces; While driving: Shift gears promptly. During the break-in period for manual transmissions, use appropriate gear selection for different driving conditions, avoiding high-gear low-RPM or low-gear high-RPM situations; During maintenance: New vehicles require timely servicing during break-in period. The first maintenance is particularly crucial for ensuring subsequent safe operation. Cold running-in precautions: Idle warm-up for 30 seconds to 1 minute before driving; Avoid overloading during break-in; Use quality fuel and engine oil; Control driving speed; Avoid sudden acceleration, speeding, and emergency braking; Address any malfunctions immediately; Maintain proper oil, coolant levels and tire pressure to prevent leaks, replenishing when necessary.

12

4

Share

What does a two-axle vehicle mean?

Two-axle vehicle refers to a car with one row of steering wheels in the front and one row of driving wheels at the rear. The most basic type of vehicle is a two-axle vehicle. Methods to identify axles: The method to distinguish axles is to count the number of rows of wheels from front to back. The number of rows of wheels equals the number of axles. Common household vehicles are dual-axle, meaning they have two axles. For trucks, the number of axles is the same as the number of rows of wheels. To determine how many axles a truck has, simply count the number of rows of wheels. The axle connects the wheels to the vehicle body. The more axles there are, the more wheels there are, hence the greater the loading capacity of the truck. Cargo standards for different vehicles: A two-axle vehicle is considered overloaded if the total mass of the vehicle and cargo exceeds 18,000 kilograms and is not allowed on the road; the total mass of a three-axle truck must not exceed 25,000 kilograms, and the total mass of a three-axle vehicle train must not exceed 27,000 kilograms; the total mass of a four-axle truck must not exceed 31,000 kilograms, and the total mass of a four-axle vehicle train must not exceed 36,000 kilograms; the total mass of a five-axle vehicle train must not exceed 43,000 kilograms.

8

0

Share

Will traffic police fine for removing the 'Brilliance BMW' badge?

Removing the 'Brilliance BMW' badge may result in a fine from traffic police. Below is an introduction about traffic police: Introduction: Traffic police are public security officers who work in traffic management police brigades. Role: As a branch of the police force, their main responsibilities include maintaining traffic order, handling traffic accidents, investigating and penalizing traffic violations, and managing vehicle registration. Duties: They organize and promote traffic regulations, manage road traffic order in accordance with the law, oversee vehicles, drivers, and pedestrians, educate traffic violators, investigate and handle traffic accidents, all to ensure normal traffic order and the smooth and safe operation of transportation.

2

Share

Can motorcycles go on the highway on September 1st?

Motorcycles that meet national requirements are allowed on the highway. Here are some relevant introductions about highway access: Introduction to highways: Highways refer to high-speed roads, compared to medium-speed and low-speed roads. In environments where low-speed is mainstream, low-speed is normal or regular speed, while in environments where medium-speed is mainstream, medium-speed is normal or regular speed. Precautions before entering the highway: Pay attention to checking weather and road conditions, conduct safety inspections on the vehicle, study the driving route in advance, carry vehicle breakdown warning signs and fire extinguishers, and determine driving and rest plans in advance.

8

4

Share

Where Does the Condensate Water from a Car's Air Conditioning System Drain Out?

Automobile air conditioning drain holes are typically located under the front engine hood, at the junction between the windshield and front fender. Below is relevant information about automotive air conditioning systems: Automotive Air Conditioning Overview: A vehicle's air conditioning system consists of a compressor, condenser, throttle element, evaporator, blower, and necessary control components, designed to regulate cabin temperature and humidity for driver comfort. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the refrigerant's temperature and pressure increase before being delivered to the condenser. Within the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to outside air passing through the condenser, causing liquefaction. The liquid refrigerant then flows through the throttle device where its temperature and pressure decrease before entering the evaporator. Inside the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from cabin air passing through the evaporator and evaporates back into gas. This gaseous refrigerant is then drawn into the compressor to begin the next cycle.

13

5

Share

What are the differences between the Tiguan and Tiguan L?

What is the displacement of the N55 engine?

What is Cold Running-in for New Cars?

What does a two-axle vehicle mean?

Will traffic police fine for removing the 'Brilliance BMW' badge?

Can motorcycles go on the highway on September 1st?

Where Does the Condensate Water from a Car's Air Conditioning System Drain Out?

Where to Reduce Points Through Learning?

Where is the fuse for the Bora's windshield washer motor located?

What is the method for installing a car battery?

What is the method for replacing brake pads by yourself?