What are the differences between the Teana and the Sylphy?

1 Answers
Robert
07/30/25 12:35am
The differences between the Teana and the Sylphy are: 1. Different body dimensions: The Teana measures 4901 mm in length, 1850 mm in width, and 1447 mm in height, with a wheelbase of 2825 mm; the Sylphy measures 4641 mm in length, 1815 mm in width, and 1450 mm in height, with a wheelbase of 2712 mm. 2. Different powertrains: The Teana is equipped with a 2.0L naturally aspirated engine and a 2.0L turbocharged engine; the Sylphy is equipped with a 1.6L naturally aspirated engine. 3. Different positioning: The Teana is positioned as a mid-size sedan; the Sylphy is positioned as a compact sedan. Both are vehicles under Dongfeng Nissan, and Nissan Motor is a Japanese multinational automobile manufacturer listed on the Tokyo Stock Exchange.
Was this review help?
5
3
Share
More Forum Discussions

How to Adjust the Rearview Mirror on the Buick Excelle?

The adjustment button for the Excelle's rearview mirror is located on the left side of the driver's dashboard. Turn the control knob to the left (L) or right (R) to adjust the upper and lower rearview mirrors. Here is some relevant information about the Excelle: 1. Powertrain: The new Buick Excelle is equipped with two drivetrain combinations: a 1.3T dual-injection turbocharged engine paired with a 6-speed DSS intelligent dual-clutch transmission, and a 1.0T dual-injection turbocharged engine paired with a 6-speed DCG intelligent dual-clutch transmission. The former delivers a maximum power of 120kW at 5500 RPM and a peak torque of 230N·m between 1800-4400 RPM, while the latter offers a maximum power of 92kW at 5600 RPM and a peak torque of 170N·m between 1700-4400 RPM. 2. Safety Features: The new Excelle comes with an SBZA side blind zone alert system, TPMS intelligent tire pressure monitoring system, rear parking sensors, Bosch ESP 9.1 electronic stability control system, laser-brazed integrated roof, and an auto-dimming rearview mirror.
20
2
Share

Is the Passat from FAW-Volkswagen or SAIC Volkswagen?

The Passat is from SAIC Volkswagen. Passat Exterior: The Passat features slender spoke designs on the wheel side. The vehicle's dimensions are 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm, offering rear headroom and legroom that far exceed those of its peers. Passat Powertrain: The Passat is equipped with three different engines: a 1.4T, a 1.8T, and a 2.0T. The 1.4T engine delivers a maximum power of 150 horsepower and a maximum torque of 250 Nm, achieving 0-100 km/h in 9.3 seconds. The 1.8T engine produces a maximum power of 179 horsepower and a maximum torque of 300 Nm, accelerating from 0-100 km/h in 8.5 seconds. The 2.0T engine offers a maximum power of 220/186 horsepower and a maximum torque of 350/320 Nm, with 0-100 km/h acceleration times of 7.4/8.4 seconds.
3
3
Share

Where is the air conditioning switch for the old Audi A6?

The heating switch for the Audi A6 is located on the air conditioning panel, and the AUTO button serves as the heating switch. Air Conditioning Layout: The arrangement of different types of air conditioning systems varies. Currently, integrated heating and cooling air conditioning systems are widely used in sedans. The layout involves assembling components such as the evaporator, heating radiator, centrifugal blower, and control mechanism together, forming what is known as the air conditioning unit assembly. Air Conditioning Components: Modern air conditioning systems consist of a refrigeration system, heating system, ventilation and air purification devices, and a control system. Automotive air conditioning generally includes components such as the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, pipelines, condenser fan, vacuum solenoid valve, idle speed controller, and control system. Automotive air conditioning is divided into high-pressure and low-pressure pipelines. The high-pressure side includes the compressor output side, high-pressure pipelines, condenser, receiver-drier, and liquid pipelines; the low-pressure side includes the evaporator, accumulator, return pipelines, compressor input side, and compressor oil sump.
20
0
Share

What are the reasons for the clutch being released too slowly and the engine stalling?

The reasons for the clutch being released too slowly and the engine stalling include incorrect driving operation and improper adjustment of the engine's air-fuel ratio. Below are detailed explanations and solutions: 1. Incorrect driving operation: Releasing the clutch too quickly can cause the vehicle to shake, significantly increasing the likelihood of stalling. In this case, you need to release the clutch slowly or step on the accelerator to increase power. Solution: You need to step on the accelerator to better match the engine speed with the vehicle's speed; poor coordination can also lead to stalling. 2. Improper adjustment of the engine's air-fuel ratio: When the clutch is pressed, especially when transitioning from a no-load state to a load state, it can cause unstable engine speed. Common engine faults include poor performance in one of the cylinders, such as damage to the ignition coil or spark plugs; insufficient fuel system pressure; excessive carbon buildup in the throttle body, leading to sticking or inaccurate measurement of air intake; failure of the air flow meter or intake pressure sensor, or leaks in the intake system causing inaccurate air intake. Solution: In this case, a detailed inspection at a repair facility is required.
17
4
Share

What are the real reviews from Haval F7x owners?

Haval F7x offers strong power, good configuration, high cost performance, and excellent space performance, with a good reputation. Here is a brief introduction about Haval F7x: 1. Strong power: F7X is positioned as a coupe SUV, equipped with two engines with displacements of 1.5T and 2.0T respectively. The 2.0T engine can output a maximum of 224 horsepower, with a torque of up to 385 Nm. 2. Good configuration and high cost performance: The top model includes a full set of driving assistance systems, 360-degree panoramic imaging, 5 driving mode switches, adaptive cruise control, automatic parking, hill descent control, keyless entry system, remote start, driver's seat ventilation and heating, etc. Among models of the same level, F7X's configuration is top-notch. 3. Excellent space performance: The body size reaches 4600mm, and the wheelbase reaches 2700mm. In actual riding experience, the rear legroom of Haval F7X is very spacious, and the rear roof does not lose practicality due to the fastback design.
1
5
Share

What are the reasons for the Mondeo's air conditioning not cooling?

Below are the reasons and solutions for the Mondeo's air conditioning not cooling: 1. Lack of refrigerant or overcharging of refrigerant: Use a pressure gauge to check the system's high and low pressure. Normally, the high pressure should be around 13.7 bar, and the low pressure should not be less than 2.5 bar. If the pressure gauge shows very low or no pressure, it is necessary to pressurize the system to check for leaks, then evacuate, add refrigeration oil, and recharge with refrigerant. 2. Refrigerant present, but compressor not working: Generally, the compressor may not work if the external temperature is too low. If the compressor is not working, it could be due to wiring issues, a damaged air conditioning pressure switch, or a faulty electromagnetic clutch. 3. Dirty condenser leading to poor heat dissipation: This affects the air conditioning's cooling performance. The condenser surface can be cleaned with a water jet. 4. Dirty air filter: Replace the dust filter. Regular air conditioning system maintenance includes replacing the filter, using cleaning agents, and dismantling for thorough cleaning.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.