What are the differences between the T-Roc 230 and 280?

1 Answers
GageAnn
07/24/25 2:13pm
The differences between the T-Roc 230 and 280: 1. Different horsepower: The T-Roc 230 has a maximum horsepower of 131 hp; the 280 has a maximum horsepower of 150 hp. 2. Different power: The T-Roc 230 has a maximum power of 96 kW; the 280 has a maximum power of 110 kW. 3. Different torque: The T-Roc 230 has a maximum torque of 225 Nm; the 280 has a maximum torque of 250 Nm. The T-Roc is a compact SUV produced by FAW-Volkswagen, with a body length, width, and height of 4318mm, 1819mm, and 1582mm respectively, and a wheelbase of 2680mm. In terms of power, the T-Roc offers a 1.2L turbocharged model and two versions of the 1.4L turbocharged engine with high and low power outputs.
Was this review help?
7
4
Share
More Forum Discussions

Which Year's Cars Are China 5?

China 5 vehicles were launched around 2016, and the China 5 automotive emission standard was fully implemented nationwide in July 2017. The China 5 emission regulation level is equivalent to the fifth-phase emission standard implemented in Europe. China 5 vehicles are those that comply with the 'National Fifth Stage Emission Standard for Motor Vehicle Pollutants.' The motor vehicle pollutant emission standards were established to enforce environmental protection laws, reduce and prevent pollution from vehicle exhaust, protect the ecological environment, and ensure human health. Compared to the China 4 standard, the China 5 standard can reduce nitrogen oxides in vehicles by 25% to 43%, significantly improving environmental efficiency.
20
5
Share

Is Taiwan left-hand or right-hand traffic?

Taiwan is right-hand traffic. Similar to mainland China, the United States, Russia, France, Germany, and most other countries, vehicles in Taiwan drive on the right side of the road. The direction of road traffic is an important aspect of traffic regulations worldwide, specifying the side of the road vehicles should drive on to avoid confusion and accidents. Road traffic directions can be categorized into two types: left-hand traffic, where vehicles drive on the left side of the road, and right-hand traffic, where vehicles drive on the right side. Approximately 34% of countries drive on the left, while 66% drive on the right. In terms of road mileage, about 28% of the world's drivable roads are left-hand traffic, and 72% are right-hand traffic.
9
0
Share

What is an AT Transmission?

AT stands for automatic transmission, which is also known as a torque converter transmission because it connects to the engine via a torque converter. The torque converter consists of three main components: the pump, turbine, and stator. The internal structure of an AT transmission is relatively complex, featuring multiple planetary gear sets that enable gear shifting and torque conversion. The advantages of AT transmissions include superior reliability and durability, as well as smoother gear shifts. Since it uses a torque converter to connect with the engine, the transmission fluid inside the torque converter can absorb some of the vibrations and jolts during gear shifts.
14
2
Share

What Causes a Burnt Smell from the Car Air Conditioner?

Car air conditioner emitting a burnt smell may be due to mold growth on the surface of the heat exchanger fins, producing a musty odor (similar to traditional Chinese medicine or a scorched smell). The musty smell occurs because moisture and mold accumulate on the indoor heat exchanger of the air conditioner and cannot completely evaporate, forming mold spots. Over time, this results in a musty odor when the AC is turned on. Generally, the mold growth process happens during the cooling cycle, but the smell can become more pronounced during heating. It could also be a burnt smell from some plastic components heating up, which is more common in new cars. If there is a strong burnt smell or an electrical burning odor, it is advisable to stop using the air conditioner immediately and have it checked at a repair shop promptly.
2
1
Share

What Does the First Maintenance Include?

The first maintenance at a 4S shop includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking the levels of various fluids to ensure they are normal, inspecting the generator belt and wiper blades for any damage; checking tire pressure for normalcy and examining tires for uneven wear, bulges, or damage; inspecting the chassis, including brake pads, brake discs, connecting rods, ball joints, CV joints, and any scratches; checking all switches in the vehicle; ensuring all lights are functioning properly. Estimated time: Completing all tasks takes approximately 2 hours. Items needed for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. The first maintenance should be performed at the designated service center. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific timing varies by vehicle, generally after driving 1,000 to 3,000 kilometers. It is crucial to attend the first maintenance on time, neither earlier nor later. Completing the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The first maintenance period is calculated from the date of vehicle pickup. There are two indicators for the first maintenance: mileage and time. Whichever comes first will be the standard. Here are the essential inspections and replacements that must be completed during the first maintenance of a new car: changing the engine oil and cleaning the three filters (oil filter, fuel filter, and air filter); checking the coolant level to ensure it is normal; inspecting the brake fluid and clutch fluid levels; verifying the power steering fluid level and checking for any leaks at the oil pipe connections; examining the generator, air conditioning, water pump, and belts for aging and tension; checking tire pressure and wear condition, inflating tires as needed, or performing tire rotation if wear is detected. When changing the engine oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle User Maintenance Manual," as different vehicle models require different oil specifications. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, using water to wash the body and wiping it with a cloth. It is important to note that the interior should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or remove them, scrub with a brush and detergent, dry them, and then put them back. The rubber mats under the driver's floor have many drainage holes. Water entering these areas will not dry naturally but may flow through the holes to corrode components like the gearbox. The best practice is to use a vacuum cleaner for cleaning, followed by wiping with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: If the antifreeze level is low, it is recommended to drain the existing antifreeze and refill it with the same brand. Different brands of antifreeze have varying chemical properties, and mixing them may cause corrosion. Always use the same brand to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a car rust, some people apply oil to make them functional again. However, lubricating wheel bolts and nuts can pose safety risks. At high speeds, lubricated bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: EFI cars differ from conventional vehicles. Their fuel injection control system can automatically adjust the fuel supply based on the engine's temperature and operating conditions, ensuring a smooth start.
3
2
Share

Which Car Color is the Safest?

White cars are the safest. This is related to white's high reflectivity of light and ease of identification. Here are some relevant introductions about cars: 1. From a safety perspective: Cars with colors that have good visibility, such as red, yellow, and white, are preferable. Colors with poor visibility, like blue, green, and black, have relatively lower safety. 2. Car maintenance considerations: Cars generally require maintenance every 5,000 kilometers or six months, and attention should be paid during maintenance. Engine oil plays a role in lubrication, cooling, etc., and is crucial for the normal operation of a car's engine.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.