What are the differences between the Sylphy and Sunny cars?

What causes the idle speed of Kia K2 to fluctuate?

Here are the reasons for the fluctuating idle speed in Kia K2: 1. The main reason is excessive carbon buildup in the throttle body, which restricts air intake, requiring a throttle body cleaning at a repair shop. 2. Poor atomization of the fuel injectors in the fuel supply system leads to incomplete combustion, necessitating an inspection of the electronic fuel injection system. Below is the procedure for cleaning the automotive fuel system: 1. Open the fuel tank cap, remove the filter screen, and use a hose to extract most of the fuel from the tank, leaving about 10-15 cm of fuel. Add 80ml of ethanol gasoline replacement cleaner, reinstall the filter screen, and close the fuel tank cap. 2. Disconnect the engine's fuel inlet and return lines, and connect them to the corresponding lines of the no-disassembly cleaning machine using dedicated adapters to form a loop. 3. Based on the scale of the no-disassembly cleaning machine's reservoir or the number of engine cylinders (100ml of gasoline per cylinder), add gasoline to the cleaner's reservoir along with 100ml of ethanol gasoline replacement cleaner. 4. Adjust the pressure according to the vehicle type; carburetor vehicles require appropriate pressure adjustment, while fuel-injected vehicles need 2-3 pressure adjustments. 5. Start the engine, check for fuel leaks in the inlet and return lines, and clean at idle for 15-20 minutes, revving the engine every 3-5 minutes to expel carbon deposits and moisture through the exhaust pipe. 6. Disconnect the no-disassembly cleaning machine from the engine's fuel inlet and return lines, restore the vehicle's fuel system, and check for fuel leaks after starting the engine.

9

4

Share

What to Do If You Forget to Bring Your Driver's License on the Highway?

Here are the solutions if you forget to bring your driver's license on the highway: 1. Driving a motor vehicle on the road without carrying your driver's license does not constitute unlicensed driving. 2. You can leave after reporting your driver's license number to the traffic police for verification. 3. Forgetting to bring your driver's license, according to the (Road Traffic Law), will result in a 1-point deduction from your license and a fine of 50 yuan. Below are some precautions for driving a motor vehicle: 1. If you own multiple vehicles, it is best to carry your driver's license in your wallet and keep each vehicle's registration certificate in the glove compartment of the respective vehicle. 2. When driving on the road, obey traffic rules. 3. While driving, do not smoke, do not answer phone calls, yield to pedestrians, yield to non-motor vehicles, do not speed, and obey traffic signals. 4. Always carry your driver's license and vehicle registration certificate when driving.

12

4

Share

How to Open the Fuel Tank Cap of Changan Onuo

There is a fuel tank switch lever located below the left side of the driver's seat in the Changan Onuo. Pull it upwards to open the fuel tank cap. Below are detailed instructions about the car fuel tank cap: 1. First, understand the structure of the car fuel tank cap. Modern cars usually allow remote control of the trunk and fuel tank cap from inside the cabin, providing great convenience to the owner. 2. Generally, the trunk is separated from the cabin by the rear seats. Therefore, by removing the rear seats, you can access the trunk from the cabin. Once inside the trunk, you can open the lock by prying or turning the movable parts on the lock with a screwdriver. 3. If the fuel tank cap cannot be opened, you can start from the trunk. First, remove the inner panel covering the fuel tank in the trunk. The panel is usually secured by plastic clips and can be easily pried open with a screwdriver. After removing the inner panel, you will see the locking mechanism of the fuel tank cap and the cable for remote operation. Simply pull the cable to open the fuel tank cap.

10

4

Share

Where is the rearview mirror heating button on the Hongqi H5?

The rearview mirror heating button on the Hongqi H5 is located on the driver's side door panel, between the door handle and the rearview mirror adjustment buttons. The driver's door panel of the Hongqi H5 integrates various rearview mirror controls, including left/right adjustment, heating, and folding. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rain or fog, eliminating the need for frequent manual wiping by the driver and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment control—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as the driver's side has dedicated adjustment buttons. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. As the temperature rises, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively defogging and deicing the mirror. However, in heavy rain, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The rearview mirror heating function works by incorporating electric heating wires, which consume a significant amount of power. Ensure the vehicle is running when using this feature to avoid draining the car battery, which could prevent the engine from starting. Other methods for defogging rearview mirrors include: Opening windows slightly to create air circulation between the inside and outside of the car, reducing temperature differences and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.

8

4

Share

What is the minimum speed required to use cruise control?

When the speed reaches above 40 km/h, cruise control can be activated. The steps to set cruise control are: press the "On/Off" button, then briefly press the "-Set" button, and the car will enter cruise control mode. At this point, you only need to hold the steering wheel, and both the accelerator and brake pedals can be released. Here are some relevant details: 1. The speed is set at the current speed. To decelerate while maintaining cruise control, press the "-Set" button, and the speed will decrease by 1.6 km/h increments until the button is released; the speed cannot drop below 40 km/h during cruise control. To accelerate and maintain cruise control, press the "+Resume" button, and the speed will increase by 1.6 km/h increments. Once the desired speed is reached, briefly press the "-Set" button to confirm the setting. 2. In cruise control mode, whether you brake to decelerate or press the accelerator to speed up, cruise control will be canceled. To reactivate it, you need to press the "-Set" button again. 3. In cruise control mode, the car will automatically maintain speed on flat roads, but speed may vary slightly on inclines. This is because, in cruise control mode, fuel injection is entirely controlled by the car's computer, which determines the injection amount based on sensor parameters, resulting in some lag.

19

3

Share

What does brake-hold mean on a car?

brake-hold refers to the ABH (Auto-Brake-Hold) automatic parking system. When the function is activated, the car can be stopped by pressing the brake pedal during temporary stops. To move forward, simply press the accelerator pedal to release the braking force, allowing the driver to avoid prolonged braking when the vehicle is stationary and prevent unnecessary rolling when the automatic electronic parking brake is engaged. Additional information: 1. The Auto-Brake-Hold system is a technology application that enables an automatic handbrake function while the car is in operation. This technology allows the driver to avoid prolonged braking when the vehicle is stationary and prevents unnecessary rolling when the automatic electronic parking brake is activated. The function of the Auto-Brake-Hold system is to prevent the vehicle from rolling backward, which is particularly useful on slopes and during frequent starts and stops. 2. The Auto-Brake-Hold system and the electronic parking brake (EPB: Electrical-Park-Brake, technical name: electro-mechanical parking brake) can together form an intelligent braking control system. This integrates the temporary braking function during driving with the long-term braking function after parking, and the parking brake is implemented via electronic control.

17

3

Share

What are the differences between the Sylphy and Sunny cars?

What causes the idle speed of Kia K2 to fluctuate?

What to Do If You Forget to Bring Your Driver's License on the Highway?

How to Open the Fuel Tank Cap of Changan Onuo

Where is the rearview mirror heating button on the Hongqi H5?

What is the minimum speed required to use cruise control?

What does brake-hold mean on a car?

Should a Tire Be Repaired if the Puncture Doesn't Go All the Way Through?

What tires are used on the Trumpchi GS3?

What brand is the Exeed LX?

What is the fault when the ABS light is on in a truck?