What are the differences between the Sunny and the Sylphy?

Should a scooter use 92 or 95 octane gasoline?

Whether a scooter should use 92 or 95 octane gasoline should be determined based on the recommendations in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, you can also check the fuel tank cap, as it will usually indicate the recommended octane rating. Typically, the gasoline grade can also be determined by the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the use of new technologies, the gasoline grade cannot be solely determined by the compression ratio. Engines with high compression ratios can also be tuned to use lower-octane gasoline. This is because, in addition to the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade is not a problem as long as you switch back to the correct grade after the tank is empty. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increase in octane number can change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles designed for higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Because the octane number is too low, the fuel's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant damage to the engine. However, if the knocking is severe, it indicates serious engine issues. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, and in severe cases, even cylinder scoring.

3

1

Share

How is the Binyue's engine?

In terms of power, the Geely Binyue is equipped with a 1.5T turbocharged three-cylinder engine, delivering a maximum output of 177 horsepower and a peak torque of 255 Nm. It accelerates from 0 to 100 km/h in 7.9 seconds and is paired with a 7-speed wet dual-clutch transmission. The electronic gear shifter offers a high-tech feel, and the sports version also features paddle shifters. The chassis utilizes a front MacPherson independent suspension and a rear torsion beam suspension. Here is additional information: In terms of exterior design, the Binyue is positioned as a sporty SUV. The front fascia features a pentagonal grille design with red accents, F-shaped headlights, chrome trim below the grille, a trapezoidal lower air intake, and a front bumper with black painted chrome trim. Regarding body dimensions, the 2018 Geely Binyue measures 4330 mm in length, 1800 mm in width, 1609 mm in height, with a wheelbase of 2600 mm. The body adopts a two-tone design, with blackened A, B, C, and D pillars and an upturned spoiler, enhancing the vehicle's sporty appeal. For the interior design, the Geely Binyue boasts a well-layered layout. It features a three-spoke multifunctional flat-bottom steering wheel, a digital instrument cluster, and a floating touchscreen on the center console with chrome trim on the right side. The center console is equipped with a 10.25-inch touchscreen, offering a smooth and responsive user experience. It also includes a built-in dashcam that can record vehicle status, such as speed, throttle, and brake functions.

9

2

Share

What is the green book of a car called?

The green book of a car refers to the Motor Vehicle Registration Certificate. The "Motor Vehicle Registration Certificate" is the legal proof of vehicle ownership, equivalent to the car's household registration. It is printed and issued together when the vehicle is registered for a license plate and receives the vehicle license. The Motor Vehicle Registration Certificate is a document that accompanies the car throughout its life and serves as legal proof of vehicle ownership. It is kept by the vehicle owner and is not carried with the car. It is required to be presented when handling motor vehicle insurance, transfer procedures, and vehicle information registration, and it records changes in the vehicle's status. For motor vehicles registered before the implementation of the Motor Vehicle Registration Certificate and have not applied for it, the vehicle owner can apply for the Motor Vehicle Registration Certificate at the local vehicle management office. However, if the vehicle owner applies for changes, transfers, or mortgage registration, they must apply for the Motor Vehicle Registration Certificate at the vehicle management office before submitting the application. When applying, the vehicle owner must fill out an application form, inspect the vehicle, and submit identity proof. The vehicle management office should confirm the vehicle, verify the vehicle identification number imprint, review the submitted proofs and certificates, and issue the Motor Vehicle Registration Certificate within five days from the date of acceptance. Article 7 of the "Motor Vehicle Registration Regulations" states that for registration applications, the vehicle owner must fill out an application form, inspect the vehicle, and submit the following proofs and certificates: Identity proof of the vehicle owner; Proof of vehicle origin, such as the purchase invoice; Vehicle factory qualification certificate or import certificate for imported vehicles; Proof of payment of vehicle purchase tax or tax exemption certificate; Motor vehicle traffic accident liability compulsory insurance certificate; Vehicle and vessel tax payment or tax exemption certificate; Other proofs and certificates required by laws and administrative regulations during motor vehicle registration. For vehicles not imported through customs and those exempt from safety technical inspections as specified by the competent department of motor vehicle products under the State Council, a motor vehicle safety technical inspection qualification certificate must also be submitted. The vehicle management office should confirm the vehicle, verify the vehicle identification number imprint, review the submitted proofs and certificates, and issue the Motor Vehicle Registration Certificate, license plate, vehicle license, and inspection qualification mark within two days from the date of acceptance. Article 43 of the "Motor Vehicle Registration Regulations": If the Motor Vehicle Registration Certificate is lost, missing, or damaged, the vehicle owner must apply for a replacement at the local vehicle management office. When applying, the vehicle owner must fill out an application form and submit identity proof. For replacing the Motor Vehicle Registration Certificate, the vehicle must also be inspected. The vehicle management office should confirm the vehicle, review the submitted proofs and certificates, and reissue or replace the Motor Vehicle Registration Certificate within one day from the date of acceptance.

17

3

Share

What happens if you drive without a driver's license?

Driving without carrying a driver's license may result in a fine of up to 200 yuan and 1 penalty point. According to Article 2, Section 5, Item (4) of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Driving a motor vehicle on the road without displaying the inspection compliance mark or insurance mark, or without carrying the vehicle registration certificate or driver's license, will result in 1 penalty point. The fine is based on Article 90 of the "Traffic Law," which states that motor vehicle drivers who violate road traffic safety laws and regulations regarding road usage may receive a warning or a fine ranging from 20 to 200 yuan. Therefore, the driver's license must be carried as required. If driving without a license, according to Article 99 of the "Road Traffic Safety Law of the People's Republic of China," driving a motor vehicle without obtaining a driver's license, or while the license is revoked or suspended, may result in a fine ranging from 200 to 2,000 yuan and may also be subject to detention for up to 15 days. There are nine possible scenarios for driving without a license or being considered as driving without a license: 1. Not having a driver's license; 2. Obtaining a driver's license illegally without taking the exam; 3. The driver's license has been canceled or revoked; 4. Obtaining a driver's license illegally without meeting the driving conditions (age and health status); 5. The driver's license has expired; 6. The driver's license is temporarily suspended; 7. Driving a civilian motor vehicle with a military or armed police driver's license; 8. Driving in China with a foreign driver's license; 9. Driving a vehicle that does not match the permitted vehicle type specified on the driver's license.

9

1

Share

Where is the ETC installed on the vehicle?

The installation position of ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle N between 30 degrees and 90 degrees (the angle between the surface of the electronic tag and the horizontal plane). For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, it may affect the signal transmission of the microwave communication link, and should be installed in the microwave skylight zone. ETC is the abbreviation of Electronic-Toll-Collection, meaning electronic toll collection system. To apply, you need to provide the original and photocopy of the vehicle owner's valid ID card and driving license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the driving license should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are the precautions for installing ETC: Do not block the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If this is not considered when installing ETC, it will increase the driver's blind spot. Install it behind the right side of the rearview mirror to avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power, but generally does not need to be charged or have its battery replaced, as it has a solar panel on the back that can charge itself. Therefore, when installing, avoid the black areas on the windshield and do not install it in a position that easily blocks the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever, connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal lever in. If it is removed casually, the anti-removal lever will pop out and trigger the switch, locking the electronic tag and making it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note that: the ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front. The recognition speed for ETC lanes is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, resulting in failed toll deduction. When using a debit card bound to ETC, insufficient balance will also cause the toll deduction to fail.

19

0

Share

What Voltage Should Be Used to Charge a Car Battery?

Car battery charging voltage ranges between 13~15V. The maximum charging voltage for a car battery is set according to the battery type and working conditions. Both excessively high or low voltage can have adverse effects. Low voltage may make it difficult or even impossible to start the car, while high voltage may damage the battery. Precautions for charging a car battery: Before charging, check the electrolyte level; do not charge if the electrolyte is insufficient. During charging, measure the density and voltage of the electrolyte approximately every hour and monitor its temperature. Ensure the charging area is well-ventilated and free from open flames, as the bubbles in the electrolyte contain hydrogen and oxygen. Connect the positive terminal to the positive and the negative to the negative; do not reverse the connections. Connect the charger to the battery terminals in the engine compartment; if the battery is located in the trunk, do not connect the charger directly to the battery terminals there. Ensure the charging voltage matches the battery voltage. Car battery maintenance methods: Regularly clean the battery: As an essential component of the car, the battery should be inspected and cleaned periodically. Clean the exterior of the battery, especially the terminals, removing dust, grease, and other contaminants. Also, clean the battery casing. If you are unable to do this yourself, it is recommended to visit a professional repair shop or a 4S store. Reduce electrical usage when the engine is off: After turning off the engine, minimize the use of electrical devices in the car. Many people enjoy listening to the radio or using other electrical devices while parked, but prolonged use can drain the battery, making it difficult to start the car and shortening the battery's lifespan. After driving at night, check if the headlights are turned off. Replace the battery periodically: Car batteries have a limited lifespan, typically around three years or 100,000 kilometers. If the battery is used beyond its lifespan, it may exhibit abnormalities. Check the battery's condition through the inspection window; a normal state is indicated by a green color. If the color is not green or shows other colors, the owner should take note. Start the car regularly: If the car is not used for an extended period, start it periodically. During prolonged parking, the battery's charge gradually depletes, leading to a discharged state. To maintain a full charge, it is best to start the car at regular intervals to recharge the battery.

14

2

Share

What are the differences between the Sunny and the Sylphy?

Should a scooter use 92 or 95 octane gasoline?

How is the Binyue's engine?

What is the green book of a car called?

What happens if you drive without a driver's license?

Where is the ETC installed on the vehicle?

What Voltage Should Be Used to Charge a Car Battery?

What are the reasons for a motorcycle's weak starting power?

Can the Nissan Sylphy e-Power get a green license plate?

What are the reasons for the lack of heat in the Magotan's front passenger seat heater?

How to Push-Start a Manual Transmission Car?