What are the differences between the Sagitar 1.2T and 1.4T?

What Are the Maintenance Items for a Car with 100,000 Kilometers?

After driving 100,000 kilometers, car maintenance mainly involves replacing some wear-prone parts and fluids. Below are the specific maintenance items for a car with 100,000 kilometers: 1. Replacement of Wear-Prone Parts: The wear-prone parts on a car include belts, spark plugs, ignition coils, brake pads, brake discs, wipers, various filters, and tires. The replacement of metal wear-prone parts primarily depends on their wear condition, while the replacement of rubber wear-prone parts is due to the aging phenomenon that occurs after prolonged use. 2. Fluid Replacement: The fluids that should be considered for replacement in a car include brake fluid, engine oil, coolant, transmission fluid, and power steering fluid.

16

3

Share

What is the 0-100 km/h acceleration time for Tesla?

According to official data, the Tesla Model Y has a 0-100 km/h acceleration time of 3.7 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque essentially represents the strength of the force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Tesla Model Y has a maximum torque of 10,000 Nm and a 0-100 km/h acceleration time of 3.7 seconds. The NIO has a maximum torque of 610 Nm and a 0-100 km/h acceleration time of 5.6 seconds. Transmission efficiency: The transmission acts as a medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Tesla Model Y uses a single-speed transmission for electric vehicles. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Tesla Model Y has a power-to-weight ratio of 139 Hp/T and a 0-100 km/h acceleration time of 3.7 seconds. The NIO has a power-to-weight ratio of 137 Hp/T and a 0-100 km/h acceleration time of 5.6 seconds.

16

1

Share

Is it better to charge a Tesla to 80% or 90%?

Tesla vehicles can be charged to either 80% or 90%. Below is additional information: Tesla is a pure electric vehicle manufacturer from Silicon Valley, USA, and all its models are pure electric vehicles. Tesla's models include: Model 3, Model X, Model S, Model Y, etc. Introduction to the Model 3: The Model 3 is an entry-level model from Tesla, a pure electric mid-size sedan. The Model 3 has a wheelbase of 2875 mm, with length, width, and height measuring 4694 mm, 1850 mm, and 1443 mm, respectively. The Model 3 is available in both rear-wheel drive and all-wheel drive versions. The rear-wheel drive version is a single-motor model, while the all-wheel drive version is a dual-motor model. The rear-wheel drive version's motor has a maximum power of 202 kW and a maximum torque of 375 Nm. The all-wheel drive version's motors have a combined power of 340 kW and a combined torque of 639 Nm. This car uses a ternary lithium battery, which is commonly used in most pure electric vehicles and plug-in hybrid vehicles. Ternary lithium batteries have higher energy density and are lighter in weight. The positive electrode of a ternary lithium battery is made from ternary materials. The Tesla Model 3 features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The double-wishbone suspension helps reduce body roll and minimizes brake dive. The multi-link suspension is an improved version of the double-wishbone suspension, where the two wishbones are replaced with separate links.

17

3

Share

What are the causes of abnormal noises while the car is moving?

There are several reasons for abnormal noises during car movement, including inaccurate four-wheel alignment and damaged wheel bearings. Below are detailed explanations of the causes of abnormal noises during car movement: 1. Inaccurate four-wheel alignment: When the four-wheel alignment is inaccurate, it causes significant wear on the tires, leading to uneven tire wear and resulting in abnormal noises. 2. Damaged wheel bearings: Abnormal noises can occur when a wheel bearing is damaged. Long-distance driving places high demands on wheel bearings. Bearings that are of poor quality or have been used for an extended period may fatigue and become damaged under prolonged high-speed operation, leading to abnormal noises.

13

3

Share

Is the middle lane in a three-lane road considered the fast lane or the slow lane?

For roads with three or more lanes in the same direction: the leftmost lane is the fast lane, the middle lane is the travel lane, and the rightmost lane is the slow lane. Speed regulations on highways: The speed in the fast lane is generally required to be between 80km/h and 120km/h; the speed in the slow lane is generally required to be between 60km/h and 100km/h. The average speed on the highway should not be lower than 60km/h. If you must slow down due to a malfunction, you can signal and change lanes to call for help. The normal distance between vehicles is generally around 15m to 20m, as speeds on highways are high, and braking may not be timely. This ensures you can react in case of an emergency stop. Precautions on highways: Strictly distinguish the functions of each lane and drive in the designated lane. Generally, drive in the main travel lane, and only use the overtaking lane when passing other vehicles to ensure smooth traffic flow. Strictly adhere to speed limits, as speeding can easily lead to accidents. Driving too slowly may obstruct other vehicles. Reduce speed accordingly when driving in rain or snowy conditions. Maintain a safe following distance. Under normal conditions, with dry pavement and good braking, the following distance (in meters) should not be less than the speed (in km/h).

13

5

Share

What should be paid attention to in parallel parking for Subject 2?

When performing parallel parking for Subject 2, pay attention to not driving too fast, misjudging positions, and the vehicle body crossing the line. Here is a detailed analysis: 1. Do not drive too fast: The accelerator pedal must be stabilized, especially when turning the steering wheel. Consciously relax a little, otherwise the speed can easily increase, making it difficult to control if too fast. 2. Misjudging positions: When turning, be sure to accurately identify the reference points and use the habitual reference points you commonly use during training. 3. Vehicle body crossing the line: When reversing, failing to properly judge the vehicle's position can easily cause the rear of the vehicle to cross the line.

8

0

Share

What are the differences between the Sagitar 1.2T and 1.4T?

What Are the Maintenance Items for a Car with 100,000 Kilometers?

What is the 0-100 km/h acceleration time for Tesla?

Is it better to charge a Tesla to 80% or 90%?

What are the causes of abnormal noises while the car is moving?

Is the middle lane in a three-lane road considered the fast lane or the slow lane?

What should be paid attention to in parallel parking for Subject 2?

What does 'rec' mean on a dash cam?

How to Replace the Coolant in a Lavida?

Does Lower Car Air Conditioning Temperature Affect Fuel Consumption?

Will a car's air conditioning not cool if the sensor is broken?