What are the differences between the Prado 2700 and 4000?

1 Answers
JuneMarie
07/24/25 9:56pm
The differences between the Prado 2700 and 4000 are: 1. Different engines: The Prado 2700 uses a 2.7L naturally aspirated engine; the 4000 uses a 4.0L naturally aspirated engine. 2. Different body dimensions: The Prado 2700 has a body length, width, and height of 4820mm, 1885mm, and 1845mm respectively; the 4000 has a body length, width, and height of 4930mm, 1885mm, and 1880mm respectively. 3. Different configurations: The Prado 2700 is equipped with full-time four-wheel drive, a 4-speed automatic transmission, and a 4-cylinder engine; the 4000 is equipped with full-time four-wheel drive and a 5-speed automatic transmission.
Was this review help?
19
4
Share
More Forum Discussions

How to Remove the Passat Headlight Switch?

First, turn off the car's ignition switch. Press the combination switch and rotate it to the right. Then pull the switch outward. The headlight switch can be removed manually without the need for any tools.
7
1
Share

How to automatically fold the mirrors on an Audi A3?

First, locate the exterior mirror control switch for the Audi A3 on the left side of the driver's door, near the window controls. You can turn the knob to position L or position R. If you turn the knob to the left and then move it up, down, left, or right, you can adjust the left mirror.
16
1
Share

How to adjust the height of the Tiida's low beam headlights?

Locate the Tiida's ignition switch, step on the brake, and start the vehicle. Turn on the left-side light switch and set the knob to the AUTO position, which is the automatic headlight setting. Rotating the knob upwards will lower the headlight beam height, while rotating it downwards will raise the headlight beam height.
18
0
Share

How to eliminate the Mercedes ESP warning light?

By pressing the menu button on the left side of the steering wheel, then using the up and down keys to select the assistance option and pressing the "OK" button, and finally choosing the ESP off option. If the wheel speed sensor has poor contact or the signal line is short-circuited, go to a 4S shop to check and repair the fault, then use a computer to clear the fault code.
6
0
Share

How to Clean a Car Air Conditioner Thoroughly?

You need to remove the glove compartment to access the car's air filter, which can then be taken out. Once removed, you can see the blower assembly. Turn on the air conditioning to the maximum cooling setting with the fan at its highest speed. After switching the air conditioning to external circulation mode, set the fan to maximum speed, and then you can proceed with cleaning the air conditioning system.
1
0
Share

How to Slow Down When Driving on the Highway

Hold the steering wheel steady, quickly move your foot from the accelerator pedal to the brake pedal, and determine the amount of pressure to apply based on the situation to brake. When driving through busy areas, hazardous sections, or encountering obstacles, it is necessary to control the speed by downshifting. Use the throttle to control the speed, relying on the vehicle's inertia and the engine's idle operation to overcome the friction between the tires and the road surface as well as air resistance.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.