What are the differences between the new Wrangler Sahara and Rubicon?

1 Answers
NicoleMarie
07/30/25 2:38am
JEEP Wrangler Rubicon and Sahara have the following differences: 1. Different wheelbase; Rubicon: wheelbase (mm) 2945. Sahara: wheelbase (mm) 2947. 2. Different maximum power; Rubicon: maximum power (Kw) 207. Sahara: maximum power (Kw) 209. 3. Different maximum torque; Rubicon: maximum torque (Nm) 340. Sahara: maximum torque (Nm) 347. 4. Different application scenarios; Rubicon: focuses on extreme off-road performance, adapting to harsher off-road environments. Sahara: emphasizes daily off-road practicality and economy. 5. Different colors; Rubicon: adopts a two-tone design with four wheel arches featuring black plastic with grain texture. Sahara: wheel arches are body-colored. 6. Different tire sizes. Rubicon: off-road 17-inch wheel mud tires. Sahara: road-oriented 18-inch wheel all-terrain tires.
Was this review help?
4
5
Share
More Forum Discussions

How many liters of transmission fluid does the Excelle require?

The Buick Excelle's automatic transmission fluid capacity is 8.2L, but typically only 4L is needed during replacement. The manual transmission fluid capacity is 1.8L, with approximately 2L required for replacement. The dual-clutch transmission fluid capacity is 2.45L. Functions of transmission fluid: Transmission fluid primarily maintains the cleanliness of the gear system and provides lubrication to the transmission components to extend their service life. Transmission fluid replacement methods: Gravity drain: Using tools to loosen the drain plug, allowing the transmission fluid to flow out naturally under gravity. Machine flush: The flush machine connects to the transmission's fluid circuit, using hydraulic pressure to push out the old fluid with new fluid.
9
2
Share

Where is the generator fuse of BYD F3 located?

There are two fuse boxes in the BYD F3, one located near the battery in the engine compartment, and the other inside the glove box on the left side of the steering wheel. Advantages of BYD F3: High cost performance; Spacious interior; Stylish and elegant exterior; Well-equipped in high-end models. Exterior of BYD F3: The BYD F3 features a fashionable and elegant exterior design. Although it bears some imitation traces, it still attracts many consumers. Interior of BYD F3: The interior design is simple and generous overall, with a fresh light-colored scheme. It is fully equipped, and features like leather seats and reverse radar in high-end models have received positive feedback from users. The air conditioning performs well, but the craftsmanship and materials are average, with noticeable gaps in some areas. Some 2010 models have reduced configurations, and some users have reported rattling noises from the dashboard.
19
1
Share

What is the fuel tank capacity of the Arrizo 7?

Arrizo 7 has a fuel tank capacity of 50 liters, which is the officially announced data. The Arrizo 7 uses 92-octane gasoline, with a fuel consumption of 7L per 100 kilometers. A full tank can cover a distance of approximately 714km. During daily driving, it is important to monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is recommended to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This extra space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
6
1
Share

How often should the spark plugs of the Buick Excelle 15N be replaced?

The spark plugs of the Buick Excelle 15N should be replaced every 3 years or 60,000 kilometers. Under normal maintenance conditions, car spark plugs should be replaced after 40,000 to 60,000 kilometers of driving. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following maintenance standards can be used as a reference: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps to replace the spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for any external debris like leaves or dust and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires in the order of the firing sequence and secure the cover.
8
0
Share

Where is the Roewe 350 fuse box located?

The Roewe 350 is equipped with four fuse boxes, located under the left cover of the driver's side instrument panel; next to the battery on the left side of the engine compartment; on the battery; and on the left front side of the engine compartment. Function of automotive fuses: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will melt within seconds, providing circuit protection. Precautions for checking fuses: When inspecting or replacing fuses, the ignition switch and all electrical equipment must be turned off, and the negative battery cable must be disconnected. Open the fuse box, use fuse removal pliers to grip the fuse head, pull and remove the fuse. Check if the fuse has blown. If it has, replace the blown fuse with another fuse of the same ampere rating.
10
2
Share

What should be paid attention to when replacing the cylinder gasket of Roewe 350?

When replacing the cylinder gasket of Roewe 350, pay attention to: when removing the cylinder head bolts, it must be done after the engine is completely cooled. The removal should follow the principle of evenly loosening from both sides to the middle diagonally; the selected cylinder gasket must be a quality-assured original factory accessory that meets the requirements. The function of the cylinder gasket: The cylinder gasket is one of the most important gaskets in a car. Its function is to ensure the sealing between the cylinder block and the cylinder head joint surface, preventing gas, water, and oil leakage. Characteristics of the cylinder gasket: It is usually made of thin metal sheets wrapped with asbestos. Nowadays, pure metal gaskets are also used. Due to the harsh working environment, it requires heat resistance, corrosion resistance, sufficient strength, elasticity, and thermal conductivity to ensure reliable sealing.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.