What are the differences between the new and old models of the Liexing?

What is the difference between automatic and manual transmission?

Manual transmission is what we call 'manual gearbox', while automatic transmission is 'automatic gearbox'. The main difference between driving these two types of vehicles is that manual transmission cars require the driver to operate the clutch and shift gears, whereas automatic transmission cars do not. Increasingly, more consumers are opting for automatic transmission cars when purchasing a vehicle, as they are more convenient and easier to drive in congested urban areas. Below is some relevant information about automatic transmissions: 1. Common types of automatic transmissions include AT (automatic transmission), dual-clutch transmission, and CVT (continuously variable transmission). 2. AT transmission is the most mature and widely used transmission technology, known for its smooth gear shifting. However, the production and development costs of AT transmissions are the highest. Dual-clutch transmissions are currently very popular due to their fast gear shifting and high transmission efficiency. The structure of a dual-clutch transmission is similar to that of a manual transmission, but it features two sets of clutches—one controlling odd-numbered gears and the other controlling even-numbered gears. 3. CVT transmissions are compact, lightweight, and have relatively low manufacturing costs. They are commonly found in many Japanese cars. CVT transmissions provide almost no shifting jerk, and cars equipped with CVT transmissions are generally more fuel-efficient.

7

3

Share

How to Adjust the Time on Honda Accord?

Accord, as the embodiment of Honda's innovative spirit and global leading technology, has a 38-year history worldwide. As the representative of Honda's 'innovation' and cutting-edge technology, Accord continues to create new value and has won the trust of 19 million users globally. The steps to adjust the time on Honda Accord are as follows: 1. First, locate the 'sound' button on the air conditioning control panel and press it, the time on the dashboard will start flashing. 2. Then, press the '4' button to adjust the hour and the '5' button to adjust the minute. 3. After setting the correct time, press the 'sound' button again to confirm.

10

4

Share

What does the plus and minus sign on the D gear of an automatic car mean?

Automatic transmission's D plus and minus refers to the manual mode in the automatic transmission. The gears of an automatic transmission are: 1. P is the parking gear and starting gear; 2. R is the reverse gear; 3. N is the neutral gear; 4. D is the drive gear, also known as the forward gear; 5. L is the low gear; 6. S is the sport mode; 7. OD is the overdrive gear. Automatic transmission means that the driver does not need to shift gears manually, and the vehicle will automatically select the appropriate gear to drive according to the driving speed and traffic conditions. The steps for parking an automatic transmission are: 1. Press the brake to stop the car; 2. Shift the gear from D to N and pull up the handbrake; 3. Press the foot brake and shift the gear from N to P; 4. Release the foot brake, turn off the power, and pull out the key.

20

2

Share

What kind of engine oil should be used for Changan CS35?

For the naturally aspirated engine models of this car, fully synthetic engine oil with 5w30 or 0w30 can be used, while models equipped with turbocharged engines should use fully synthetic engine oil with 5w40 or 0w40. Here are some introductions about Changan CS35: 1. Changan CS35 is a compact SUV, which is equipped with two engines, one is a 1.6-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. 2. The front suspension of this car uses MacPherson independent suspension, and the rear suspension uses torsion beam non-independent suspension. This car has a very high cost performance.

6

1

Share

How to handle the u112300 fault?

u112300 fault is the vehicle fault value received by the total data. The solution is to check the communication line of the lost communication module by plugging in the gateway, find the breakpoint and repair it to restore normal operation. It is recommended to go to a 4S shop and use a professional computer to read and repair it. Here is some extended knowledge about fault codes: 1. After troubleshooting a car fault, it is generally necessary to clear the fault code. 2. When clearing fault codes, it should be done strictly according to the specified fault code clearing scheme for the specific vehicle model. Be careful not to remove the negative ground wire of the battery casually to clear the fault code. Otherwise, the following two abnormal situations may occur: （1）Cause some models' control center computers to lose normal records. Because some models' control computers have an automatic memory function, removing the negative ground wire of the battery easily will lose the engine operating data stored in RAM, making the car perform poorly for a long time after repair, or the cleared fault code may reappear after driving for a while. （2）May cause the loss of some functions. For example, the audio lock function is one of the common situations. At this time, it is necessary to follow a very troublesome repair procedure to unlock the audio system to restore its normal function.

5

3

Share

How to Remove a Frameless Wiper Blade?

Here are the detailed steps for removing a frameless wiper blade: 1. First, lift the wiper blade up. 2. Then, remove the wiper blade from the metal arm. 3. A small metal hook clamps onto the original rubber strip to secure it. 4. Pry up the metal hook and pull out the wiper rubber strip. 5. Pry open the plastic cap on this side of the wiper blade. 6. Replace with a new rubber strip, cover the plastic cap, and clamp the metal hook to secure the new rubber strip. Below is some relevant information about wiper blades: 1. Wiper blades can effectively improve the driver's field of vision. The switch is located on the lever behind the left side of the steering wheel, with separate switches for the front and rear wiper blades. 2. When using wiper blades, ensure the rubber strip is sufficiently moist. Only with adequate moisture can the rubber maintain good flexibility. Proper use of wiper blades helps maintain a clear field of vision and extends their lifespan. 3. Wiper rubber strips are made of rubber and need to be replaced regularly; otherwise, they may affect the performance of the car's wiper blades.

18

0

Share

What are the differences between the new and old models of the Liexing?

What is the difference between automatic and manual transmission?

How to Adjust the Time on Honda Accord?

What does the plus and minus sign on the D gear of an automatic car mean?

What kind of engine oil should be used for Changan CS35?

How to handle the u112300 fault?

How to Remove a Frameless Wiper Blade?

Can a Lost Motorcycle Key Be Duplicated?

What does 4WD mean in cars?

How often should brake fluid be changed in a car?

How to Check the Emission Standard of a Vehicle?